Stone cutting disc AD 125 S in a special offer pack of 5
Depressed-centre design for cutting granite, concrete, masonry, sand lime bricks, natural and artificial stone
Professional cutting disc in accordance with EN 12413
With a circumferential speed of 80 m/s, stone cutting discs are just as fast as a racing car at 288 km/h. Reason enough to rely on brand cutting discs of professional quality when selecting the accessories for your hand-held angle grinder. That's why you should opt for Trotec's tried and tested stone cutting disc AD 125 S.
The AD 125 S, which is compatible with all hand-held angle grinders, is a powerful stone cutting disc of Trotec brand quality complying with EN 12413 and approved with an MPA test certificate. Thanks to grain size 30, hardness P and a cutting width of 3.2 mm for a longer lifetime, it is the ideal solution for quickly cutting concrete, natural stone, roofing tiles or sand lime bricks.
The bonded silicon carbide abrasive on the disc is similar to diamond grains in terms of its structure and characteristics. It is obtained from quartz sand and petroleum coke at more than 2,100 °C and has a high degree of thermal conductivity. This – combined with the material's hardness – is what makes silicon carbide abrasive grains the ideal abrasive for mineral materials.
The fibre-reinforced synthetic resin bonded fabric keeps the silicon carbide abrasive grains of the stone cutting disc AD 125 S at an ideal distance from each other and thus guarantees best material properties for tough use and dry cutting at a high circumferential speed of up to 80 m/s.
Due to the depressed-centre design of the AD 125 S, the disc's structure is additionally reinforced, which contributes to an improved and stabilised guidance for straight cuts.
A few practical benefits:
- Professional cutting disc in accordance with EN 12413
- Trotec brand quality with MPA test certificate (Materials Testing Office)
- Silicon carbide abrasive for mineral materials
- Grain size 30 (coarse) – ideal for fast and economical cutting work
- Hardness P (hard) – ideally suited for concrete, natural stone, masonry
- All cutting discs in depressed-centre design with fibre-reinforced synthetic resin bonded fabric (BF) for a high degree of stability
Important features at one glance:
Die AD 125 S ist eine leistungsstarke Stein-Trennscheibe nach EN 12413 in Trotec-Markenqualität mit MPA-Prüfzeugnis und dank Korngröße 30, Härtegrad P sowie einer Schnittbreite von 3,2 mm für höhere Standzeiten die ideale Lösung zum Trennen von Beton, Natursteinen, Dachziegeln oder Kalksandstein.
Sie sparen: 44 %
8.98 € 4.99 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen