1. Contact
  2. Overview
  3. The company
  4. Tools - Innovation is our passion

Tools - Innovation is our passion

We continually provide new and innovative product solutions. See for yourself!

Future product innovations

  • PBCS 4A-TrotecInnovations Don't miss this!

    PBCS 4A / 6A / 10A

    Battery chargers - real all-rounders!

    The PBSC 4A / 6A / 10A are fully featured and have an LED display and 6 operating modes. The standard mode, AGM mode for higher voltage than the standard mode, winter charging mode for use at temperatures below 5 °C, trickle charging mode to protect against deep discharge and to constantly maintain an optimal state of charge, reconditioning mode to restore the charging capacity of deeply discharged lead-acid batteries with increased charging voltage and the supply mode for Permanent power supply without connecting a battery, e.g. when changing the battery, so that no program settings are lost. Depending on the model, their maximum capacity is between 120 and 200 amperes and can therefore be used for a wide variety of vehicle battery types without any problems. The chargers automatically adapt to the battery voltage of 12V vehicles and are protected against the ingress of dust and water jets according to IP65. Thanks to microprocessor control, the 6-stage charging cycle is monitored and adjusted fully automatically. Maximum security of chargers and batteries thanks to various protection mechanisms. The PBSC 4A / 6A / 10A are the perfect battery charging helpers!...

  • PBCS 2A-TrotecInnovations Don't miss this!

    PBCS 2A

    Battery charger for a variety of battery types

    The battery charger with LED display, a maximum capacity of 60 amperes and high-quality EFB technology for start-stop systems is compatible with a wide variety of vehicle battery types. It is ideally suited for gel batteries as well as for AGM and low-maintenance lead-acid batteries. The charger automatically adapts to the battery voltage of 12V vehicles and is protected against the ingress of dust and water jets according to IP65. Thanks to microprocessor control, the multi-stage charging cycle is monitored and adjusted fully automatically. The trickle charge mode protects the battery from deep discharge and ensures a permanently optimal state of charge. The integrated protection mechanisms secure the charger and the battery at the highest level. The winter charging mode ensures problem-free use even at outside temperatures below 5 °C. The PBCS 2A has a practical hanging option, e.g. for wall mounting. Ideal for seasonal vehicles such. B. convertibles with long downtimes.

  • Wet and dry vacuum cleaners VC 1200W-TrotecInnovations Don't miss this!

    VC 1200W

    Wet and dry vacuum cleaner with cleaning function and HEPA filter

    The 1,200 W strong vacuum cleaner can suck in both 8 litres of dry dirt and 6 litres of liquids. The integrated HEPA filter removes dust and dirt particles from the surfaces to be cleaned, such as hard floors or carpets, with an efficiency of up to 90%, and the foam filter securely traps the dirt particles that have already been filtered. With a simple push of a button, the HEPA filter can be cleaned of any remaining dirt particles without having to dismantle the filter. The suction tube with extension piece (total length 86 cm) and the 1.8 m long extension hose give you enough space to reach even hard-to-reach places. Slits and joints can be optimally cleaned with the enclosed crevice nozzle. With the washing nozzles and the wet suction function, fabric surfaces such as B. upholstered furniture must be thoroughly cleaned. The VC 1200W also has a practical blow-out function and an auto-stop function if the container is too full. Both a handle and 360° rotating wheels simplify transport immensely and allow the vacuum cleaner to just glide along....

  • PRTS 10-1200-TrotecInnovations Don't miss this!

    PRTS 10-1200

    Routing machine for professional craftsmen and DIY enthusiasts

    With the high-quality and versatile routing machine PRTS 10-1200 you achieve perfect results when machining wood, lightweight construction materials or non-ferrous metals. The milling cutter with its 1,200 watts of power and infinitely adjustable idle speed of 11,000 to 30,000 rpm and a plunge depth of 55 mm is designed for demanding projects. The milling depth can be finely adjusted in increments of 1 mm. A 6-piece cutter set, a depth stop and rip fence as well as a guide bush for reproducing cutting shapes is also included for you. Furthermore, the scope of delivery contains a compass tip for circle cutting. The spindle lock provides for a tool-free exchange of the insertion tools, and the integrated dust extraction system as well as the adapter for external dust extraction ensure dust-free working.

    Learn more!
  • PBGS 10-120-TrotecInnovations Don't miss this!

    PBGS 10-120

    Powerful double grinder with 100-part accessories

    With the powerful 120 W double grinder with infinitely variable speed control up to 11,500 rpm, all grinding, engraving, cutting, polishing and cleaning work can be carried out in no time at all, even in continuous operation. Ideal for the hobby workshop or the professional craftsman. Thanks to the high grinding performance, steel, metals, wood, plastic and paintwork can be processed effortlessly. The 1 m long shaft is used for precision work. A spark suppressor device with a closed protective disc cover and non-slip rubber feet ensure safe, stable and low-vibration work. To mount and fix the PBGS 10-120 to the table, a base plate with pre-drilled holes is already included in the scope of delivery. The extensive accessories that go with it include 100 parts and are supplied in a practical and clear wooden transport case for safe and dust-free storage. So you always have everything in view and immediately at hand.

  • Cordless high-pressure cleaner PPWS 10-20V-TrotecInnovations Don't miss this!

    PPWS 10-20V

    Dual battery high-pressure cleaner

    With the powerful cordless high-pressure cleaner PPWS 10-20V, cleaning work around the house and garden can be carried out effortlessly and garden areas can be watered. Thanks to the 20V 2Ah FlexPower multi-battery, you have absolute freedom of movement for all your projects, such as the cleaning of cars, bicycles or garden furniture and terraces. Using cleaning agents is also no problem thanks to the special attachment nozzle and container for cleaning fluids. With a pressure of 22 bar, the PPWS 10-2V cleans extremely efficiently and gently. 6 types of spray (water jet, soft jet, jet angle 0°/15°/25°/40°) can be set via the spray lance with practical multifunctional nozzle. The self-priming function enables the use of alternative water sources such as rain barrels. The 20V multi-battery (2 Ah / 4 Ah) can be ordered as an accessory and can be combined with a large number of Trotec power tools.

  • PCHS 10-20V-TrotecInnovations Don't miss this!

    PCHS 10-20V

    Cordless chainsaw

    The PCHS 10-20V with 20V 2Ah battery power and an idle speed of 3,800 rpm is well equipped for cutting wooden boards, squared and round timber or for hobby handicraft work. Also for garden work, e.g. when cutting back trees or bushes, as well as when shredding green waste, it is the perfect helper. The particularly compact and lightweight cordless chainsaw ensures convenient sawing and fast work progress. The smooth-running and low-vibration 6-inch saw chain works with a high cutting performance for powerful cuts. The non-slip handle with perfect ergonomics can be adjusted by 45° to the left and right. Additional safety is provided by the protective hood, which can be swivelled by 90°, and the safety switch, which stops the chain immediately. The chain can be changed without tools. The FlexPower Multi batteries (2 Ah / 4 Ah) can be reordered and can be combined with Trotec's power tools.

  • PGSS 15-20V-TrotecInnovations Don't miss this!

    PGSS 15-20V

    Cordless pruning shears

    Spring is the time for gardening. The new cordless pruning shears PGSS 15-20V are the right partner at your side for this task. Thanks to its 20V-2Ah-FlexPower multi-device battery, the handy and lightweight garden tool can be used flexibly. The high-quality and durable steel blades can be positioned precisely and cut branches up to a thickness of 28 mm without any effort. The electrical drive of the PGSS 15-20V facilitates pruning and cutting back fruit trees, shrubs and hedges. The pruning shears allow you to make precise cuts, improving healthy plant growth at the same time. The sturdy plastic cover allows you to store the blades safely. The FlexPower multi-device batteries (2 Ah / 4 Ah) can be reordered as accessory parts and are compatible with a variety of Trotec's power tools.

    Learn more!
  • PMTS 01-12V-TrotecInnovations Don't miss this!

    PMTS 01‑12V

    Cordless grinder

    Small helper, competent all-rounder! Whenever you wish to attain great results in your job or when you perform DIY work, the handy cordless grinder PMTS 01-12V is the perfect assistant. For DIY enthusiasts, model builders, precision mechanics, jewellery workshops, opticians, artists or hobbyists, the robust device with its powerful 12V 2Ah lithium-ion battery and the comprehensive accessory kit (50-piece) is excellently suitable for various applications and materials. By means of the integrated setting wheel, the speed of the rotation tool can be individually preselected between 5,000 – 25,000 revolutions per minute in 6 stages. Depending on the application and the type of material, you can adjust the optimum rotational speed for your tasks.

    Learn more!
  • PBSS 10-20V-TrotecInnovations Don't miss this!

    PBSS 10-20V

    Cordless belt sander with FlexPower

    With the 20 V 4 Ah cordless belt sander PBSS 10-20V that can be used flexibly the professional processing of wood, spackle and painted surfaces is particularly easy and time-saving. With a speed selection of 1,030 – 3,020 rpm and a belt speed of up to 350 m/min, both professional craftsmen and do-it-yourselfers can easily sand, sharpen, smooth, clean and deburr large areas of wood, plastics or metal/steel. A dust bag, an adapter for external dust extraction and an abrasive belt for wood with a grain size of 80 (76 x 457 mm) are supplied. The 20 V 4 Ah Flexpower multi-device battery with maximum outstanding battery life is compatible with a wide range of Trotec tools.

    Learn more!
  • PESS 10-20V-TrotecInnovations Don't miss this!

    PESS 10-20V

    Cordless random orbital sander

    With its eccentric rotational movement of up to 12,000 rpm, the powerful 20 V 2 Ah lithium-ion battery sander guarantees for perfect wood sanding work results, whether in the professional or in the hobby workshop. The rotational movement can be set to 6 stages, and the vibration-damped handle can be adjusted in 6 positions. Thanks to the Velcro® system, the tool-free exchange of the abrasive belt is convenient and easy. 1 random orbital sanding plate (round), 4 abrasive belts for wood machining with the grain sizes 60/80/120/240, a dust collector with filter system, an adapter for external dust extraction and a transport case for perfect storage are already included in the scope of delivery. The 20V-2Ah lithium battery can be easily combined with further flexpower battery power tools from Trotec – one battery for many tools.

    Learn more!
  • PWLS 15-20V-TrotecInnovations Don't miss this!

    PWLS 15‑20V

    Cordless work light with FlexPower

    The powerful 20 V 2 Ah cordless work light PWLS 15‑20V with its 50 high-performance LEDs provides a luminous flux output of up to 2,000 lumens that can be selected in 3 stages. The FlexPower multi-device battery with battery level indication comes with an endurance of 2 hours. The battery is fully charged in only one hour and ready to be used again for the work light PWLS 15-20V in DIY or professional workshops. Besides, the battery is also compatible with other 20 V 2 Ah battery power tools from Trotec – one battery for many tools. For even more power, the 20 V 4 Ah Flexpower multi-device battery can easily be ordered as an accessory. The handle with its comfortable soft grip surface can be adjusted by 90° and in 8 positions which offers more flexible application options for the PWLS 15-20V. Besides, the work light is not only equipped with a powerbank function, but also with a magnetic holder as well as practical suspension hooks.

    Learn more!

Current product innovations

  • Mobile power distributor PV30-TrotecInnovations The very latest!

    PV30

    Mobile power distribution made easy

    The robust plastics mobile distributor PV30 with its IP44 type of protection is equally suitable for adverse operational environments in indoor and roofed outdoor areas and can be used for a large variety of applications thanks to its two CEE sockets (16 A, 400 V): For example as power current or light current distributor on construction sites, in the agricultural sector, for events, and for the industry, commercial, or camping and recreational sector. To ensure easy transport, the power distributor PV32 is equipped with a fold-down V2A carrying handle and a take-up facility for the 2-m connecting cable. In the warehouse, the distributors can be stacked to save space. The PV30 is also the perfect accessory for the TAC XT 18, for example, as the TAC XT 18 is also equipped with two CEE 16A connection plugs.

    Learn more!
  • Cordless vacuum cleaner VC 15-20V-TrotecInnovations The very latest!

    VC 15‑20V

    Powerful FlexPower cordless vacuum cleaner

    The vacuum cleaner VC 15‑20V not only impresses with its power of 20 V 2 Ah but also scores with its extensive equipment. The lightweight cordless vacuum cleaner comes equipped with a crevice nozzle as well as an upholstery and mattress nozzle. It easily removes stubborn dirt and dust from almost any surfaces like floors, upholstered furniture, mattresses and car upholstery and collects it in its large 10 l container. The integrated washable HEPA filter removes up to 90 % of the house dust, pollen, allergens and further fine particles from the areas to be cleaned. Thanks to the wet vacuum function, up to 2.7 litres of liquid can be collected in the container provided. Furthermore, the VC 15‑20V is compatible with the 20V-4Ah battery, and both FlexPower multi-device batteries (20V 2Ah/4Ah) can be combined with further cordless tools from Trotec.

    Learn more!
  • Pressure hose 15 m/ 25 m-TrotecInnovations The very latest!

    Pressure hose 15 m/ 25 m

    Perfectly suited for service water supply

    As accessories, we now also have pressure hoses with a length of 15 m and 25 m in our range of products. With the suitable connector, the hoses can be easily connected to all commercially available garden pumps, or e.g. also to our deep well pumps of the TDP series, for watering gardens or to supply your household with inexpensive service water. The hoses have an inner diameter of 32 mm, an outer diameter of 42 mm and a thickness of 5 mm.

    Learn more!
  • Sandpaper set for belt sanders (PBSS 10-900)-TrotecInnovations The very latest!

    Abrasive sanding belts 533 x 76 mm

    10-piece set for all kinds of wood grinding work

    For modernisation, renovation, restoration or the proverbial finishing touch – the low-wear abrasive belts are always the first choice. You can smooth rough surfaces without difficulty, sand down glue residues, remove coats of paint and sand edges. The grain is made of corundum and is available in 40, 60, 80, 100, 120 and 150 mm, making it ideal for working on almost any kind of wooden surface. The 533 x 76 mm abrasive sanding belts fit perfectly onto all commercially available belt sanders as well as on the Trotec PBSS 10-900 belt sander.

    Learn more!
  • PBSS 10-800-TrotecInnovations The very latest!

    PBSS 10-800

    Powerful belt sander for handicraft and hobby applications

    The powerful and handy 800 W belt sander PBSS 10-800 is the ideal partner for professional craftsmen or do-it-yourselfers, for large-surface sanding, grinding, smoothing, cleaning and deburring of wood, plastics or metal and steel. The professional belt sander not only convinces by its belt speed of 120 – 380 m/min, but also by a continuously adjustable speed selection between 1,030 and 3,280 rpm. For continuous operation, the PBSS 10‑800 is provided with a lock switch. The 2m cable allows for both stationary and mobile use. Thanks to the tool-free clamping system, the abrasive belt can be changed quickly and easily. A dust collection bag, an adapter for external dust extraction, 2 retaining clips as well as an abrasive belt for wood with a grain size of 80 (75 x 475 mm) are supplied.

    Learn more!
  • PBSS 10-900-TrotecInnovations The very latest!

    PBSS 10-900

    Professional belt sander for any application

    The professional, 900-watt belt sander PBSS 10‑900 is ideal for fast, large-surface sanding, grinding, smoothing, cleaning and deburring of wood, plastics or metal – whether for professional craftsmen or do-it-yourselfers. The device convinces with an impressive belt speed of 120 – 380 rpm and an infinitely variable speed selection between 1,030 and 3,270 rpm. In addition, the powerful belt sander can also work in continuous operation thanks to the locking switch. The 4-metre cable allows for both stationary and mobile use. The tool-free clamping system makes it a child’s play to replace the abrasive belt. In addition, a dust collection bag, an adapter for external dust extraction, 2 retaining brackets and an abrasive belt for woodwork with a grain size of 80 are already included in the scope of delivery.

    Learn more!
  • PPLS 10-800-TrotecInnovations The very latest!

    PPLS 10-800

    Electric planer for every application purpose

    With its equally robust and easy-to-handle design, this electric planer combines everything you can expect from a reliable and versatile planer, whether you’re a professional craftsman or a DIY enthusiast. This effective and powerful electric planer PPLS 10-800 is equipped with a powerful 800 W motor and an optimum speed of 17,000 rpm – for demanding applications with a cutting depth of up to 2.5 mm and a max. rebate depth of 11 mm. Not only its power, precise operating principle and flexible applicability, but also its extensive equipment with a rip fence and rebating depth stop, 3 V-grooves and a start lock offer perfect planing results for all tasks and ensuring maximum safety.

    Learn more!
  • PSIS 11-230V-TrotecInnovations The very latest!

    PSIS 11-230V

    Powerful soldering station

    The universally applicable PSIS 11-230V with its 48 watts of power achieves a temperature of 500 °C within 5 minutes to solder or unsolder electronic components – for professional electricians and for DIY enthusiasts. The setting range of the temperature can be controlled steplessly between 150 and 500 °C. The scope of delivery comprises 2 soldering tips and 2 lead-free solders in different designs (sizes) for accurately performing rough to fine work. A soldering sponge and a soldering iron stand are also included. Furthermore, the PSIS 11-230V is provided with a practical storage compartment for the soldering tips and the solder as well as with a holder for the soldering iron.

    Learn more!
  • PTNS 11-230V-TrotecInnovations The very latest!

    PTNS 11‑230V

    Electric tacker instead of hammer and nails

    The 45W powerful electric tacker is part of the basic equipment for hobbyists and professional craftsmen, because it makes work a lot easier, e.g. for covering frames, when fastening textiles, when covering upholstered furniture or for smaller woodwork where fine nails have to be countersunk. Wherever the PTNS 11‑230V is used, it performs its work powerfully and precisely with an adjustable impact force of 20 impacts per minute. An adjustment lock ensures the necessary security. Commercially available staples type 53 (length: 6-14 mm, width: 11.4 mm, thickness 0.75 mm) and staple nails type 47 (length: 15 mm, width: 2 mm) can be used with the electric tacker without any problems . 200 staples with a length of 14 mm and 100 staple nails with a length of 15 mm are already included in the scope of delivery.

    Learn more!
  • Hand drill set-TrotecInnovations The very latest!

    Hand drill set

    37-piece complete package

    The handy 37-piece set is ideal for precisely drilling small holes into soft materials such as metal, wood, plastics, rubber, PVC, walnut, amber, jewellery and for many other creative projects. It includes a 90 mm hand drill with an SDS fixture as well as a mini vice (incl. 2x clamping blocks, 4x dowel pins, 4x screws). The complete package also contains 25x HSS twist drill bits (0.5/0.6/1.0/1.2/1.5/1.8/2.0/2.3/3.0 mm) and 10x HSS micro drill bits in assorted colours, ranging from 2.1 to 3.0 mm.

    Learn more!
  • Cordless hand-held vacuum cleaner VC 10-20V-TrotecInnovations The very latest!

    VC 10‑20V

    Cordless hand-held vacuum cleaner

    The practical hand-held vacuum cleaner VC 10-20V with its powerful 20V 2Ah FlexPower multi-device battery impresses not only with its performance, but also with its modern Trotec design and convenient features. The lightweight 1.3 kg cordless hand-held vacuum cleaner has a dry and wet vacuum function as well as a large 400 ml dry dust container and a 100 ml collection container for liquids. Using the crevice and brush nozzle included in the scope of delivery, you can remove dust, dirt and impurities quickly and effortlessly from every nook and cranny. The battery life is up to 18 minutes. Moreover, the VC 10-20V is also compatible with the 20V 4Ah multi-device battery. The 20 V 2 Ah/4 Ah lithium-ion battery can also be easily combined with other cordless power tools from Trotec – one Flexpower multi-device battery for more than just one tool.

    Learn more!
  • PGSS 10-20V-TrotecInnovations The very latest!

    PGSS 10-20V

    Practical cordless grass and shrub shears

    Spring comes sooner than you think – that's why we have the suitable tool for your garden. The comfortable and lightweight grass and shrub shears lie safely in the hand and can be used flexibly thanks to the Flexpower multi-device battery (not included). To meet your individual requirements and those of your gardening work, e.g. on grass, shrubs or hedges, this practical 2-in-1 multitool is equipped with grass shears and shrub shears and its blade can be changed surprisingly quickly and easily without tools. The 2.0 Ah and 4.0 Ah Flexpower multi-device batteries can simply be ordered as accessories and are compatible with a wide range of Trotec power tools.

    Learn more!
  • TWP 9000 ES-TrotecInnovations The very latest!

    TWP 9000 ES / TWP 11000 ES

    High-quality submerged waste water pumps of stainless steel

    The two high-quality submerged waste water pumps with stainless steel housing are ideally suited for the withdrawal, recirculation and suction of water e.g. from swimming pools, basements after a flood, rain barrels, garden ponds and small building pits. The TWP 9000 ES and TWP 11000 ES not only convince with their higher resistance and durability thanks to their stainless steel construction, but also with an output of 900 to 1,100 watts and a delivery head of up to 9 metres. Above that, they are able to pump out and remove suspended particles sized 25 mm with no trouble at all. In addition, the maximum flow rate of the two submerged waste water pumps with near-ground suction is up to 20,000 litres per hour and the immersion depth is 7 metres. Thanks to the Quick-Connect elbow for astonishingly easy pump installation included in the scope of delivery, the connection hose can be flexibly fixed in the desired position at any angle. The automatic switch-on and switch-off point can be adjusted using the float switch lock....

  • TWP 4036 E-TrotecInnovations The very latest!

    TWP 4036 E / TWP 7536 E

    Submerged waste water pumps

    The TWP 4036 E and the TWP 7536 E are ideally suited for the withdrawal, suction and recirculation of water, e.g. for swimming pools, basements, rain barrels, garden ponds, small building pits or flooding. The submerged waste water pumps have a high output of 400 to 750 watts and a delivery head of up to 8 metres and can pump out suspended particles sized 25 mm easily and without any problems. In addition, the maximum flow rate of the two submerged waste water pumps is up to 12,500 litres per hour and the immersion depth is up to 7 metres. Due to the supplied elbow with Quick-Connect system for effortless installation of the pumps, the connection hose can be flexibly attached at any angle. Furthermore, thanks to the comfortable fixing clip, the float can be adjusted and locked at the required height astonishingly easily and slipping is impossible.

  • TWP 4006 E-TrotecInnovations The very latest!

    TWP 4006 E / TWP 7506 E

    Submerged clear water pumps, near-ground suction

    Thanks to the Quick-Connect elbow for quick and easy pump installation included in the scope of delivery, the connection hose can be flexibly positioned at any angle. The fixing clip lock allows the automatic switch-on and switch-off point of the float to be easily adjusted and fixed in the desired position. With a maximum flow rate of up to 13,000 litres per hour and a submersion depth of 7 metres, the TWP 4006 E and the TWP 7506 E are ideally suited for the recirculation of water and for pumping it off or out (e.g. of swimming pools, rain barrels, wells or basements) after a flood or heavy rainfall and during work in drainage shafts. The powerful 400 to 750 W submerged clear water pumps have a delivery head of up to 9.5 metres, can pump off suspended particles sized 5 mm effortlessly and, thanks to near-ground suction, can reduce the water level to only 5 mm resulting in a wipe-dry floor.

  • PWLS 10-30-TrotecInnovations The very latest!

    PWLS 10‑30 / 10-70 / 10-150

    Strong LED construction lights

    The 3 powerful LED construction spotlights made of high-quality aluminium and with a hardened glass front are ideal for renovation work, in the garage, for the garden or on construction sites. The professional spotlights differ in the number of LEDs (48/120/240 LEDs) and in the light beam output (2,700/6,300/13,500 lumen's) at a colour temperature of 5,000 K. The highly developed lamellar heat sink efficiently dissipates the heat and the LED According to IP65, emitters are protected against water jets from all directions and the ingress of foreign bodies. The high quality construction spotlights have a beam angle of 120 ° for wide and optimal illumination. The LED light is freely adjustable by 360° and the handle is adjustable by 75 °, with the PWLS 10‑150 even by 360°. The LED construction spotlights have flexible setup and suspension options.

  • Hexagonal shank drill and bit set-TrotecInnovations The very latest!

    Hex shank drill and bit set

    49-piece complete set

    This set is ideally suited for all commercially available drills/screwdrivers with hexagon mounts. It offers accessories for drilling and screwing work of all kinds in a wide variety of materials. The 49-piece set contains 13 metal twist drills (Ø1.5-6.5 mm) made of HSS steel with a titanium coating, 5 stone twist drills (Ø4-10 mm) made of tungsten carbide and carbon steel for demanding holes and 5 Wooden twist drill (Ø4-10 mm) made of carbon steel. The set also includes a 16x25mm bit set made of chrome-vanadium steel, 3 depth stop rings, 4 hexagon socket bit sockets, a countersink with a 90° angle, a magnetic bit holder and an Allen key.

    Learn more!
  • PPLS 10-20V-TrotecInnovations The very latest!

    PPLS 10-20V

    Cordless planer

    The powerful cordless planer 20 V 4 Ah impresses not only with a proud idle speed of 12,000 rpm, but also with its mobile usability. Weighing only 2 kilos, the planer is equipped with a rip fence, a two-side chip ejector and an external dust extraction system. The 20 V 4 Ah Li-Ion battery is charged and ready for use in only 1 hour thanks to the supplied quick charger with 3-stage battery level indication. The PPLS 10-20V is part of our large 20 V 4 Ah Flexpower multi-device battery series.

    Learn more!
  • Cable drum PVD2-TrotecInnovations The very latest!

    PVD2 / PVD3

    High quality cable drums 25 m / 40 m

    The robust PVD3 cable reel has 4 protective contact sockets (16 A, 250V, IP54) with self-closing hinged covers and is the ideal solution for demanding indoor and outdoor use construction, in the workshop or in the industrial sector. The drum and frame are made of high-quality plastic and convince with drainage openings and a central brake system. The 40 meter long cable has a maximum output of 3,500 watts. The ergonomically shaped handle and the stable winder ensure comfort. Thanks to the thermal protection switch, 2 plug parking spaces and high stability, there is also a high level of safety. The little brother PVD2 offers 3 protective contact sockets and a 25 m long cable with a maximum output of 3,600 watts.

  • Circular saw blade sets-TrotecInnovations The very latest!

    Four circular saw blade sets

    Carbon steel Ø 150 mm / 190 mm

    The 3-piece circular saw blade sets are suitable for all common circular saws. These sets manufactured of high-quality and durable carbon steel are available in 2 different diameters with a different number of teeth in each case – Ø 150 mm with 24 or 40 teeth as well as Ø 190 mm with 24 or 40 teeth. Irrespective of the construction project you're about to implement, here you'll find the matching saw blades.

    Learn more!
  • Hole saw sets-TrotecInnovations The very latest!

    Two hole saw sets

    Carbide and bi-metal

    The two hole saw sets are suitable for all common hand drills and standing drills. The two sets contain 6 saws each, in the sizes Ø 22, 28, 35, 44, 68 and 73 mm. The carbide-set is ideally suited for working on tiles, stone, aerated concrete and plaster with a cutting depth of up to 25 mm. With the metal saw set (bi-metal/HSS), on the other hand, you can easily drill through plasterboard, PVC, acrylic, tinplate, aluminium, zinc die-cast, copper, bronze and wood with a cutting depth of up to 35 mm. 2 hole saw holders with centre drills and Allen key are also included in the scope of delivery in each case. The bi-metal hole saw set furthermore contains an adapter for hole saws Ø 35 mm.

    Learn more!
  • PCSS 05-20V-TrotecInnovations The very latest!

    PCSS 05‑20V

    Mini cordless portable circular saw

    The powerful 20 V 2 Ah cordless portable circular saw PCSS 05-20V with an idle speed of 3,150 rpm enables precise cutting depths of up to 28 mm – quickly, easily and infinitely adjustable without tools. The supplied rip fence always guarantees precise guiding of the plunge saw, even in working areas that are difficult to access. Thanks to the practical spindle lock, the saw blade can be easily changed. The ergonomically shaped handle ensures safe and fatigue-free working even single-handedly. The PCSS 05-20V is part of our innovative and variably applicable 20 V 2 Ah Flexpower multi-device battery system. Another great advantage is the possibility of external dust extraction. An HSS saw blade (44 teeth), a TCT saw blade (24 teeth) and a diamond disc (89 mm x 10 mm) are already included in the scope of delivery for the most diverse work assignments.

    Learn more!

Former Trotec innovations

  • PTNS 10-20V-TrotecInnovations Mission fulfilled!

    PTNS 10‑20V

    Cordless tacker

    With its powerful 20V 2.0 Ah lithium-ion battery, staples (type 55) and wire nails (type 47) with a shot sequence of 30 per minute in a variety of different materials. Thanks to its slim tacker guide nose, the PTNS 10‑20V is perfectly suited for processing slim components and working close to the edge is possible without any problems. The cordless tacker comes equipped with a 6-level impact force controller and an LED work light. Furthermore, the lightweight and compact PTNS 10‑20V with its anti-slip softgrip handle can be conveniently operated with one hand.

    Learn more!
  • PSIS 10-230V-TrotecInnovations Mission fulfilled!

    PSIS 10-230V

    Digital soldering station

    With its power of 60 watts, the PSIS 10-230V reaches a temperature of 400 °C within 4 minutes. The maximum temperature range goes up to 450 °C with 3 preset levels. However, you can also manually adjust it to the desired temperature value. The scope of delivery comprises 3 soldering tips and 2 portions of lead-free solder in different forms (sizes) to ensure that you're free to perfectly carry out rough to fine jobs. A soldering sponge and soldering iron holder are also part of the set. The temperature unit, the pre-pre-programmed temperature value, the target-actual temperature and the heating temperature are shown on the LCD. The soldering iron switches itself to stand-by energy-efficiently and automatically after 30 minutes, in order to prevent oxidation of the soldering tip and to extend its lifetime. Furthermore the PSIS 10-230V is provided with a practical storage compartment for the soldering tips and solder.

    Learn more!
  • PRDS 20-20V-TrotecInnovations Mission fulfilled!

    PRDS 20-20V

    Cordless rotary hammer

    The cordless rotary hammer PRDS 20–20V convinces for screwing and drilling in wood and metal. In addition, the pneumatic hammer mechanism with 2 joules of impact force shows off its strength when hammer drilling in masonry and concrete. Impact rate and speed control with quick-stop function are infinitely variable and always provide full force control. Thanks to the SDS-plus chuck, retooling is done in a matter of seconds. As part of the Flexpower multi-device battery system, the 20 V 4.0 Ah lithium ion battery without memory effect or self-discharge can also be flexibly combined with other cordless Trotec tools.

    Learn more!
  • PPOS 10-20V-TrotecInnovations Mission fulfilled!

    PPOS 10‑20V

    Cordless polisher

    By its eccentric rotation movement clean work without leaving any residues is guaranteed. With its idle speed of 3,000 rpm, a powerful 20V 2.0 Ah lithium-ion battery and a polishing disc diameter of 245 mm you can use the PPOS 10-20V to polish larger surfaces like those of vehicles, motorcycles, boats, recreational vehicles, high-gloss furniture or floors easily and perfectly. Furthermore the cordless polisher comes equipped with a terry polishing bonnet for applying wax/polish and synthetic fibre polishing bonnet for gloss polishing. Thanks to the anti-slip grip (softgrip), comfortable and fatigue-free working is guaranteed.

    Learn more!
  • TDP 370 E-TrotecInnovations Mission fulfilled!

    TDP 370 E / TDP 750 E

    Compact, yet powerful deep well pumps

    The TDP 370 E / TDP 750 E are the smaller and more compact version of the large ones. However, their performance is in no way inferior. Whether for a cost-saving water supply, for irrigation purposes or for sprinkling gardens – the deep well pumps TDP 370 (370 W/ 5,100 l/h) and TDP 750 (750 W/ 5,100 l/h) are made of stainless steel and convey service water from wells, water reservoirs, rainwater cisterns and shafts up to 20 m depth. Reliable backflow protection and free from dirt and particles thanks to the stainless steel dirt strainer. The pumps are equipped with maintenance-free copper motors and an integrated thermal protection, providing durable operation and overheating protection.

    Moreover, the TDP 370 E / TDP 750 E come equipped with an individual mains plug and can be installed via Plug & Play. In addition, the electronic pressure switches TDP-DS (without mains socket) or TDP-DSP (with mains socket) can be optionally mounted to both pumps.

  • PRDS 05-230V-TrotecInnovations Mission fulfilled!

    PRDS 05‑230V

    Rotary hammer

    With a power consumption of 620 watts and an impact power of 2.1 joules in the pneumatic hammer mechanism the PRDS 05-230V sees to forceful drilling, impact drilling and chiselling. Safe holding in every operating situation is ensured by the vibration absorber in the rear handle and the front handgrip that is adjustable by 360°. Large operating radius thanks to the 3 m cable.

    Learn more!
  • PWLS 06-10-TrotecInnovations Mission fulfilled!

    PWLS 06-10

    Strong cordless work light

    Empty batteries and this in the worst possible moment? This is absolutely nothing the high-performance LED work light PWLS 06-10 with its 3.7 V/4 Ah Li-ion battery has to concern itself with. This cordless work light offers a burn time of up to 9 hours with an extra strong luminous power of 800 lumen. It can be adjusted in 2 brightness levels and furthermore features a strobe mode "lightning effect", which can be used as a warning signal. In order to utilize this light even more flexibly, its handle can be adjusted to 6 positions by 180°. Additionally, the PWLS 06-10 is not only equipped with a USB connection and a Powerbank function, but also with a magnetic holder and a watertight and dust-tight housing (IP44).

    Learn more!
  • PWLS 05-10-TrotecInnovations Mission fulfilled!

    PWLS 05‑10

    Practical work light

    With the PWLS 05‑10 you'll never have to work in the dark again ‑ you'll have a clear visibility at all times. This practically applicable work light is equipped with a panel light LED which provides for extra bright light with powerful 650 lumen for up to 10 hours. It can be adjusted in 2 brightness levels and furthermore features a strobe mode "lightning effect", which can be used as a warning signal. In order to utilize this light even more flexibly, its handle can be adjusted to 6 positions by 180°. Other features of the PWLS 05‑10 are its magnetic holder and a water-tight and dust-proof housing (IP44). Moreover, the work light is ready for use immediately since the batteries are included in the scope of delivery.

    Learn more!
  • PWLS 01-3-TrotecInnovations Mission fulfilled!

    PWLS 01-3

    Flexible tube work light

    Pretty bright! This flexibly usable tube light features a spot LED and a flat-panel LED and provides for at least 6 or 8 hours of extra bright light with 70 or 220 lumen. To ensure that you can respond flexibly in every situation, the lamp head can be swivelled by 90° and rotated by 270°. The PWLS 01-3 can not only be suspended conveniently on a hook or fastened using the mounting bracket while you're performing work for which you need both hands, it also comes with an integrated magnetic holder. In addition, this work light is equipped with a flashing warning light.

    Learn more!
  • Domestic water supply systems-TrotecInnovations Mission fulfilled!

    TGP 1025 ES / TGP 1025 ES ES

    Domestic waterworks - stainless steel

    The domestic waterworks TGP 1025 ES / TGP 1025 ES ES with a delivery height of 30 m are not only splash-proof (IPX4), have an output of 1,000 watts and a delivery rate of 3,300 l / h, but the pumps are also made of robust, high-quality and weather-resistant stainless steel manufactured. With the domestic waterworks TGP 1025 ES ES not only the pump is made of stainless steel, but also the pressure tank. A pressure switch is already installed in both domestic waterworks.

  • TGP 1005 E-TrotecInnovations Mission fulfilled!

    TGP 1005 E

    Garden pump with filter

    The robust, strong and splash-proof (IPX4) garden pump TGP 1005 E with an output of 1,000 watts, a delivery rate of 3,300 l / h and a delivery head of 42 m has an integrated filter. With this filter, the garden pump is additionally protected from damage, as it prevents in advance that small pebbles, dirt and deposits can penetrate the impeller. In addition, the TGP 1005 E can optionally be fitted with an electronic pressure switch with or without a plug.

    Learn more!
  • TGP 1050 E-TrotecInnovations Mission fulfilled!

    TGP 1050 E

    Domestic water supply system with filter

    The splash-proof (IPX4) domestic water supply system TGP 1050 E with its power of 1,000 watts, a flow rate of 3,300 l/h and a delivery head of 30 m is equipped with an integrated filter. This filter ensures that the domestic water supply system is additionally prevented against damage, since it already prevents small pebbles, dirt and deposits from passing through to the impeller in the first place. Furthermore the TGP 1050 E is equipped with a pump and a stainless steel pressure tank as well as a pressure switch that is already preassembled.

    Learn more!
  • TGP 1000 ES-TrotecInnovations Mission fulfilled!

    TGP 1000 ES

    Garden pump - stainless steel

    The garden pump TGP 1000 ES is not only splash-proof (IPX4), has an output of 1,000 watts, a flow rate of 3,300 l / h and a delivery head of 42 m, but the pumps are also made of robust, high-quality and weather-resistant stainless steel. In addition, the TGP 1000 ES can optionally be fitted with an electronic pressure switch with or without a plug.

    Learn more!
  • PMTS 01-230V-TrotecInnovations Mission fulfilled!

    PMTS 01-230V AC

    Rotation tool/multi-function tool

    Whether you're working with stone, wood, glass, leather or metal – the all-rounder PMTS 01‑230V not only convinces by its powerful 170-W performance, but also by its comprehensive accessories. In addition to stainless steel twist drills (1x 3 /1x 2 mm), aluminium oxide grinding heads (8x), multi-purpose cutting tools (2x) and collet chucks (1x 3,2 /1x 2,3 mm), this rotation tool kit offers a grinding stone, felt bands (4x), engraving bits (2x), also with a diamond-tipped milling cutter, abrasive belts (5x) as well as cutting wheels (25x) and abrasive wheels (25x) and lots more. The additional handle, positioning fixture, the function for stepless preselection of the oscillation rate with soft start and the quick-clamping system for a tool-free exchange of accessory parts provide for maximum work comfort.

    Learn more!
  • 282-piece accessory kit-TrotecInnovations Mission fulfilled!

    282-PIECE ACCESSORY KIT

    Ideal for multifunction and rotation tools

    Trotec offers you a comprehensive accessory kit for all commercially available multi-function tools and rotation tools. The kit also perfectly matches the multitool PMTS 01‑230V from Trotec. With 282 pieces it contains a large selection of abrasive belts, cutting wheels and abrasive wheels, grinding stones in different forms and sizes and a variety of different bits for drilling and polishing. Well assorted in a transparent case, you always find the right tool for your individual task, and as far as your creativity is concerned, the sky's the limit.

    Learn more!
  • PEGS 10-230V-TrotecInnovations Mission fulfilled!

    PEGS 10-230V

    High-performance engraving pen

    With the 17 watt engraving pen PEGS 10-230V and its high-quality and durable engraving bit of tungsten steel you can machine a variety of materials like for example metal, ceramic, wood and leather easily and with precision. The light and ergonomic design and the slip-resistant soft grip surface make handling easy and comfortable. Four engraving templates for precise working on special forms and materials are also included. Furthermore the steplessly adjustable stroke depth provides for additional work precision.

    Learn more!
  • Bit and wrench set, 40-piece-TrotecInnovations Mission fulfilled!

    40-piece bit and socket wrench set

    Clear complete set

    With this compact set you are well supplied with bits, Torx and socket wrenches. It contains bits with a slot profile (4/5/6 mm), hexagon profile (H4 / H5), cross profile (2x PH1 / 3x PH2 / 1x PH3), Pozidriv profile (2x PZ1 / 4x PZ2 / 2x PZ3) and Torx profile (1x T10,15,27,30,40 / 2x T20,25) and nine socket wrenches in 4 mm - 12 mm. Thanks to the color coding and variant and size labeling, you will find the right attachment quickly and well sorted. Thanks to the adapter incl. Bit holder and hexagon shaft, all attachments can be used both manually and with the cordless screwdrivers, screwdrivers, impact screwdrivers and impact drill drivers from Trotec.

    Learn more!
  • 15-in-1 multi-function tool-TrotecInnovations Mission fulfilled!

    15-in-1 multitool

    Compact bit and socket wrench set

    If you need a practical solution for screwing work at home, in the workshop or on the go, the compact 15-in-1 multitool is quickly at hand. It is no bigger than a pocket knife and contains bits with 3 cross profiles (PH1 / PH2 / PH3), 2 slot profiles (SL5 / SL6) and 2 hexagon profiles (H5 / H6) as well as 4 socket wrenches (6/8/9/10 mm). The magnetic ¼ " bit holder and the matching hexagon shaft as well as a smooth blade and a saw blade can be locked at 90 °, 135 ° and 180 °.

    Learn more!
  • 9-in-1 ratchet screwdriver-TrotecInnovations Mission fulfilled!

    9 ‑ in ‑ 1 ratchet screwdriver

    Practical set for powerful screwing

    Thanks to its comfortable and handy size and its structured handle, the ratchet screwdriver ensures a reliable and non-slip hold with every powerful screw. Ideal e.g. in the workshop, at home or on the go. The practical set includes 3 bits that can be exchanged on both sides with cross profiles (PH0 / PH1 / PH2) and slot profiles (4/5/6 mm). The bits are connected to the ratchet with the appropriate hexagon shafts (6.3 / 8 / 9.5 mm).

    Learn more!
  • Glue sticks-TrotecInnovations Mission fulfilled!

    Hot glue sticks

    Now it's getting colorful!

    Let your creativity run wild when crafting, decorating and fixing! The perfect choice for quick and easy gluing of e.g. Wood, plastic, textiles, cardboard, ceramics and glass in just 10 seconds with extra strong hold. The new glue sticks for all commercially available hot glue guns are available in Ø 7 mm (length: 140 mm) and Ø 11 mm (length: 150 mm) each in the color variants transparent, colored or with glitter. Each set contains 50 pens. Of course, they can also be used with the Trotec hot glue guns, PGGS 10-3.7V (Ø 7 mm) and PGGS 10‑230V (Ø 11 mm).

    Learn more!
  • Cordless sabre saw PRCS 10-20V-TrotecInnovations Mission fulfilled!

    PRCS 10‑20V

    Cordless reciprocating saw

    Thanks to the soft grip surface and 20 volt lithium-ion battery, the PRCS 10‑20V can be used for convenient and handy work in various materials such as wood or metal, without the hassle of a cable. Thanks to the tool-free adjustable guide shoe with an inclination angle of 30 ° and stepless speed control, you can operate the PRCS 10‑20V precisely. In addition, the saber saw offers a quick-action chuck for the tool-free saw blade change and switch-on protection for safe work. Typical Trotec quality: Our cordless saber saw and the 1-hour quick charger have of course been tested by TÜV Rheinland.

    Learn more!
  • Sabre saw blade sets-TrotecInnovations Mission fulfilled!

    Reciprocating saw blades

    3 sets of 5, 10 and 12 sheets

    The saber saw blade sets from Trotec fit all standard saber saws as well as the two models from Trotec, PRCS 10‑20V (battery) and PRCS 10‑850. The 5-piece set includes two sheets for wood and metal, two for metal only and one for wood with nails. The set of 10 includes eight saw blades for plastic and wood and two blades for wood with nails and metal. The 12-piece set includes seven saber saw blades for wood with nails and five for metal. Ideal e.g. for gardening, on construction sites or in the workshop.

    Learn more!
  • Cable drum PVD3-TrotecInnovations Mission fulfilled!

    PVD3

    High-quality cable drum

    The robust cable drum PVD3 is equipped with 4 safety sockets (16 A, 250 V, IP54) with self-closing flap caps and is the ideal solution for demanding indoor and outdoor applications on construction sites, in the workshop or in the industrial sector. The drum and frame are manufactured of high-quality plastics and convince with their draining openings and a central braking system. The 40-metre cable has a maximum performance of 3,500 watts. Comfort is offered by the ergonomically shaped handle and the stable crank. Thanks to the thermal protection switch, operating display, 2 connector storage spaces and a high stability, the PVD3 also offers a maximum degree of safety.

    Learn more!
  • Mobile power distributor PV32-TrotecInnovations Mission fulfilled!

    PV32

    Portable current distributor for up to 32 A

    Sturdy, compact and simply practical. The current distributor PV32 offers you three safety sockets and combined 16 A CEE socket and a 32 A CEE socket (both 5-pin, 400 V) according to EN 61439. The "Made-in EU" device is perfectly prepared for demanding application - whether in construction, industry or handcraft, thanks to its IP44 plastic housing. Overall the professional current distributor scores permanently in harsh everyday practice with its integrated residual current circuit breaker, the hinged window for the automatic circuit breakers in the housing cover, its retractable V2A steel carrying handle and its stable stackability.

    Learn more!
  • Mobile power distributor PV16-TrotecInnovations Mission fulfilled!

    PV16

    Portable current distributor for up to 16 A

    The "Made-in-EU" current distributor PV16 from Trotec features combined 4 earthed socket outlets and 2 CEE sockets (16 A, 5-pole, 400 V) according to EN 61439. The compact portable current distributor with its robust plastic housing (protection class IP44) is suitable for demanding application on construction sites, in industry or handcraft. In addition it also convinces by a residual current circuit breaker, a hinged window or the circuit breakers in the housing cover, a retractable V2A steel carrying handle and its practical and stable stackability.

    Learn more!
  • Staples and wire nails-TrotecInnovations Mission fulfilled!

    Type 53 staple set

    Quick and easy fixing

    Whether you want to fix paper, fabrics, plastic sheets, canvases, wire mesh fences, roofing papers or rear panels of cupboards – there are endless application options for the use of staples. And to make sure you don't run out of supplies, our two staple sets already come with 5,000 staples. The zinc-plated flat wire nails of the type 53 (width 11.4 mm, depth 0.74 mm, length 6 mm or 8 mm) can be used with customary tacker models without any problems. Of course they also perfectly match the cordless tacker PTNS 10‑3.6V from Trotec.

    Learn more!
  • Tackernägel-TrotecInnovations Mission fulfilled!

    Metal nail for stapler type 47

    Sturdy and discreet

    The practical supply from Trotec provide 5.000 premium type 47 nails (width: 1,8 mm, depth: 1,2 mm, length: 10 mm). Due to their small-sized nailhead they suit best to discreetly fix moulding, thin wood piece, cabinet rear panels or climbing support. Whether hand stapler, electric stapler, compressed air stapler or hammer stapler - the sturdy nails are compatible with variety of widely-available models including cordless stapler PTNS 10‑3,6V from Trotec.

    Learn more!
  • Sandpaper set for belt sanders-TrotecInnovations Mission fulfilled!

    Belt sanding paper

    10-piece set for every wood sanding job

    Whether modernization, renovation, refurbishment or the famous "finishing touch" - the low-wear belt sanding papers are a good choice. You can use it to smooth rough surfaces, sand down glue residues, remove lacquered surfaces or sand edges cleanly. The grain consists of corundum and with 40, 60, 80, 100, 120 and 150 mm it is ideally suited for processing almost all wooden surfaces. The 457 x 75 mm belt sanding papers fit perfectly on all standard belt sanders as well as on the Trotec belt sander PBSS 10‑600.

    Learn more!
  • PAGS 11-125-TrotecInnovations Mission fulfilled!

    PAGS 11‑125

    1,200 watt angle grinder

    Robust, powerful and pleasantly handy. The PAGS 11‑125 with a wheel diameter of 125 mm is ideally suited for efficient continuous use when cutting, grinding and brushing metal as well as for cutting tiles and stones. With a 1,200 W motor, infinitely variable speed preselection using a setting wheel and infinitely variable speed control with switch-on lock for safe working, it offers a consistently high output with a constant nominal speed of 12,000 rpm under load. In addition, the angle grinder convinces with spindle locking for easy disc change, tool-free quick adjustment of the disc and brush protection and an additional handle that can be variably mounted in 3 positions.

    Learn more!
  • PIWS 10-20V-TrotecInnovations Mission fulfilled!

    PIWS 10‑20V

    Cordless impact driver for demanding applications

    The compact powerhouse impresses with its high torque-turn function with five torque settings as well as automatic activation of the impact mechanism for larger requirements. Bolts and nuts can easily be loosened, tightened and tightened with the Trotec PIWS 10‑20V - even when changing tires. The infinitely variable speed control with quick stop function is as practical as the convenient right-to-left run switch. The 20 V / 4.0 Ah lithium-ion battery is charged in just 1.5 hours thanks to the quick charger. In addition, the Flexpower multi-battery can be used flexibly with other cordless tools from Trotec. A built-in LED light, 4 sockets with 17, 19, 21, and 23 mm as well as the transport case provide more working comfort.

    Learn more!