Air purification and dehumidification in warehouses
TAC series with an unparalleled air volume regulation
Two factors always cause problems when storing all kinds of goods: dust and humidity. Both damage surfaces and packaging and can render entire pallets or stocks unsaleable by causing them to become soaked, dirty or mouldy. Trotec air cleaners and dehumidifiers ensure consistent air quality in depots and dispatch warehouses.
The Trotec Group provides different dehumidification solutions – from the condensation dehumidifiers of the DH series to the adsorption dryers of the TTR series. Both are available as mobile and stationary versions. We offer the right dehumidification technology for every depot or dispatch warehouse. Innovative measuring devices and data loggers complete the dehumidification concept for storage facilities and transport zones.
Dry air sees to low dew points in the warehouse
The objective of all dehumidification measures in warehouses is the reduction of the dew point so that condensation is slowed down and packaging does not soak up. The less the air is saturated with humidity, the lower is the dew point: At 10 °C and a relative humidity of 45 % RH, for instance, it amounts to approx. -1.1 °C.
Mobile air cleaners of the TAC series for dust class H
Dust, mould spores and bacteria are filtered from the air using industrial air cleaners of the TAC series. Due to the approval for dust class H or when using HEPA filters H13 they can also be applied in very contaminated warehouses. By means of a few technical characteristics, the TAC series defines an entirely new generation of professional air cleaners with a wide range of applications in depots or dispatch warehouses.
Unique Vario-shift function and Flowmatic control
As the only air cleaners for mobile applications on the market, only the TAC devices are equipped for a fast change of position of fan and HEPA unit (Vario-shift function) meaning you can re-arrange the filter ladders in line with demand in the required sequence for standard or cleanroom applications at any time. Both mobile devices TAC 5000 and TAC 6500 are further characterized by the sensor-supported Flowmatic control for automatic retention of the preselected air volume which ensures consistent filter efficiency.
Make use of our best practice industrial services
Since every industrial undertaking has characteristic process flows, installations and facilities, every air treatment solution demands case-specific device configurations. All in all, the combined effects of air currents, humidity conditions and temperature fluctuations are often hard to calculate on a purely theoretical basis, e.g. in airlock areas or on conveying paths. The consequence: Unnecessary additional costs due to an overestimated demand or – even worse – solutions not working sufficiently in real life.
You can count on our experts
In order to precisely calculate the demand in the industry and to develop tailor-made concepts for climate conditioning experienced climate specialists are needed. Rely on our team of experts as well as the industrial services: We analyse the individual requirement situation with you present on site, determine the specific demand for devices and develop a tailor-made project solution right up to the exact positioning of the devices.
Before the planned stationary units are installed, our service team first works with mobile versions of the drying units as part of a trial run. These can be put up without any difficulty or the need for structural changes.
During this validation phase we document all relevant climate parameters such as air temperature, relative humidity, dew point or flow rate for a final optimization of the requirement calculation.
Trotec is the only provider of this advantage:
Thanks to the unique option of non-binding trial operation you will invest solely in solutions which have verifiably proven their worth in everyday operation meeting your individual on-site requirements. The stationary units will not be ordered until you are fully satisfied with our concept. The only costs incurred consist of an inexpensive hiring flat rate for the time of test operation.
Just give us a call at +49 2452 962-777 – our industry consultants will be pleased to help you personally and provide information regarding our best practice industrial services. Or send a request indicating your personal requirements directly to our industry experts. We will answer promptly!
Upon request, we will readily produce tailor-made desiccant dehumidifiers as special models “made in Germany” perfectly geared to your needs, e.g.:
- TTR industrial desiccant dehumidifiers with hygienic design
- TTR industrial desiccant dehumidifiers for PWIS-free dry air
- TTR industrial desiccant dehumidifiers with extremely low dew point
Makes use of the possibility of having special models with tailored components for your individual needs planned, designed and manufactured in close consultation with our specialists.
Click here to find out more ...
Dehumidifying & air cleaning in storages