Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Staples of type 53 and wire nails of type 47
  1. Products & Services
  2. Powertools
  3. Tool accessories
  4. Staples and wire nails

Staples of type 53/55 and wire nails of type 47

6 professional sets of zinc-coated steel wire: 2.000 to 5,000 pieces in the lengths from 6 mm to 32 mm

Bulk packs for all fastening operations

Be it to affix paper, fabric, upholstery, plastic sheeting, canvas, wire mesh fences, nets, roofing felt, wooden plates, moulding or rear panels – the high-quality staples and wire nails from Trotec offer countless application possibilities. And to make sure you don't run out of supplies, our staple and wire nail sets are delivered in economical large packs.

Suitable for all customary tacker models

The fine wire staples (type 53) and steel staples (type 55) feature different widths and are offered in different leg lengths: 6 – 25 mm. The T-headed wire nails of type 47 have a length of 10 – 32 mm. For maximum stability the staples and wire nails are made of robust steel and are additionally galvanized to prevent corrosion. Regardless of whether you are using a hand-held, electric, pneumatic or a hammer tacker – the staples and wire nails are suitable for a wide variety of customary models as well as for the convenient cordless tackers PTNS 10‑3.6V or PTNS 10‑20V from Trotec.

Simply staple it – the smart alternative

Instead of laboriously screwing, gluing or hammering with tiny nails involving a correspondingly high risk of injuries, stapling often constitutes the perfect, quick and easy alternative for all fastening operations. Many tasks in the hobby, crafts and DIY sector can easily be accomplished without any expert knowledge by use of a tacker.

Especially when it comes to upholstering old seating furniture with new textiles or mounting foil without creases or wrinkles, staples or wire nails are the first choice. On the one hand, stapling can be completed quickly and precisely, on the other, it allows for single-handed operation – leaving one hand free to tauten the material. Also, a tacker is quickly ready for use, making it an indispensable tool for various types of repair work, decorative work and handicrafts as well as for the convenient fastening of skirting boards. With Trotec's staple and wire nail sets you are definitely equipped with fastening material for a variety of projects and applications.

STAPLE OR WIRE NAIL? DEPENDS ON THE APPLICATION.

To obtain a good working result you should always use the high-quality staples and wire nails from Trotec.

Staples of types 53 and 55 (lengths: 6 – 25 mm)

Depending on what you want to join together, a staple is the best choice. Trotec offers the staples that are manufactured of strong steel in the lengths from 6 to 25 mm and, depending on the type, in he widths of 6 or 11.4 mm. What it basically comes down to is the respective thickness of the materials to be fastened. To ensure a secure hold, at least 2/3 of the leg length should penetrate into the fastening material. However, if you want to fixate solid wood on solid wood, the staple should be fully recessed. The two fixing legs and the the wide crown attach the upper material reliably to the lining. When observed from a distance, accurately applied staples can appear like a fine seam.

Wire nails of type 47 (length: 10 – 32 mm)

The chief argument for using wire nails with their width of only 1.8 mm is their small head. It renders the inserted steel nails virtually invisible in the material which helps with an unobtrusive installation of skirting boards and ceiling mouldings. Boards or textiles can also be affixed with the fine nails leaving hardly any trace.

Which type for which device?

Not all staples are alike! If you use a Trotec device, the table below will easily help you with choosing the right staples and nails. If you use a device by another manufacturer, you will find the right type of staple in the device description.

Type 53 and type 47
Stapling fabric
Fastening rear panels
Cordless tacker PTNS 10-20V Cordless tacker PTNS 10-3,6V Tacker PTNS 10-230V
Cordless tacker PTNS 10‑20V Cordless tacker PTNS 10‑3,6V Tacker PTNS 10‑230V
Type 53 staples
Type 55 staples
Type 47 wire nails

All staples and wire nails from Trotec at one glance:

Staples of type 53, 6 mm

5,000 staples, 6 mm length

5,000 pcs.

 type 53

 6 mm length x 11.4 mm width

Staples of type 53, 8 mm

5,000 staples, 8 mm length

 5,000 pcs.

 type 53

 8 mm length x 11.4 mm width

Wire nails of type 47, 10 mm

5,000 wire nails, 10 mm length

5,000 pcs.

 type 47

 10 mm length

Type 55 staples, 15 / 20 mm

3,000 staple selection, 15 / 20 mm length

3,000 pcs.

 Type 55

 15 / 20 mm length x 6 mm width

Staples of type 55, 25 mm

2,000 staples, 25 mm length

 2,000 pcs.

 type 55

 25 mm length x 6 mm width

Type 47 wire nails, 15 / 20 / 25 / 32 mm

3,000 wire nail selection, 15 - 32 mm length

3,000 pcs.

 Type 47

 15 / 20 / 25 / 32 mm length


A few practical benefits:

  • Type 53 staples with a 11.4 mm crown and a length of 6 - 8 mm
  • Type 55 staples with a 6 mm crown and a length of 15 - 25 mm
  • Type 47 wire nails in a length of 10 - 32 mm
  • Each in the advantageous economy pack (2,000 – 5,000 pieces)
  • Manufactured of hard steel
  • Galvanized and therefore corrosion-resistant
  • For temporary or permanent fastening solutions
  • Suitable for many materials
  • Fatigue-free working without physical effort
Cordless tacker PTNS 10-3.6V from Trotec
Cordless tacker PTNS 10-20V from Trotec

The right cordless tacker for every application: PTNS 10‑20V and PTNS 10-3.6V

With the cordless tackers PTNS 10‑20V and PTNS 10‑3.6V from Trotec you can fix different materials conveniently and easily. The compact power packs come with a powerful lithium-ion battery and convince by up to 30 shots per minute and a magazine that is fitted beneath and that can be optionally loaded with staples or wire nails .

Buy

Tackerklammern-Set Typ 53, 6 mm Länge (5000 Stück) show in Trotec online shop

Tackerklammern-Set Typ 53, 6 mm Länge (5000 Stück) DEAL

You save: 42 %

6.99 € 3.99 € incl. VAT Show net price (VAT not included)

buy

Tackerklammern-Set Typ 53, 8 mm Länge (5000 Stück) show in Trotec online shop

Tackerklammern-Set Typ 53, 8 mm Länge (5000 Stück)

You save: 50 %

7.99 € 3.99 € incl. VAT Show net price (VAT not included)

buy

Tackerklammern-Set Typ 55, 15-20 mm Länge (3000 Stück) show in Trotec online shop

Tackerklammern-Set Typ 55, 15-20 mm Länge (3000 Stück)

You save: 22 %

8.99 € 6.99 € incl. VAT Show net price (VAT not included)

buy

Tackerklammern-Set Typ 55, 25 mm Länge (2000 Stück) show in Trotec online shop

Tackerklammern-Set Typ 55, 25 mm Länge (2000 Stück)

You save: 22 %

8.99 € 6.99 € incl. VAT Show net price (VAT not included)

buy

Tackernagel-Set Typ 47, 10 mm Länge (5000 Stück) show in Trotec online shop

Tackernagel-Set Typ 47, 10 mm Länge (5000 Stück) DEAL

You save: 50 %

7.99 € 3.99 € incl. VAT Show net price (VAT not included)

buy

Tackernagel-Set Typ 47, 15-32 mm Länge (3000 Stück) show in Trotec online shop

Tackernagel-Set Typ 47, 15-32 mm Länge (3000 Stück)

You save: 33 %

8.99 € 5.99 € incl. VAT Show net price (VAT not included)

buy

Downloads

Loading...