Mobile power distributor PV30
Thanks to the ready-to-connect PV30, you will never lack the knack for 16 A three-phase applications
Exclusively available only at Trotec – the ready-to-connect power current solution for 3-phase 16 A consumers.
Craftsmen or restoration companies are too familiar with this problem: If you have to operate several 16 A three-phase current devices on site, the connection options available on the construction site can be fairly limited. This is because common surface-mounted socket combinations usually house only one additional 16 A CEE socket outlet in addition to a 32 A CEE socket outlet. This combination can also often be found in mobile construction site power distributors.
Electric heating devices, dehumidifiers, high-performance radial fans or mobile air conditioners – if a lot of power is required, these devices usually cannot be operated without three-phase current. And even if the employees take an appropriate power distributor to the construction site, it may sometimes happen that suitable connecting cables are missing in sufficient quantities.
Mobile 16 A power distributor including connecting cable – with a PV30 on board, you are always ready for action
The robust plastics mobile distributor PV30 is a completely ready-to-connect solution equipped with a 32 A plug and two 16 A connector couplings. The input line and both output lines are each equipped with a two-metre connection cable, so that even missing cables are no obstacle on site. At the same time, a sufficient operating range when installing the device is always maintained.
Original Trotec brand quality – exclusively available only from us
With the mobile distributor PV30, you benefit from brand quality designed by Trotec. Besides, this completely ready-to-connect version including the three integrated connecting cables with a length of two metres each, this mobile power distributor is exclusively available only at Trotec!
Just like all our PV power distributors, the PV30 is characterised by distinct differences in quality compared to other competition models: The solid and premium quality housing of the PV30, for example, is manufactured of a special plastics material, which is characterized by its high resistance, notch impact strength, thermal stability, dielectric strength, UV resistance, chemical and weather resistance – the material used is furthermore free from cadmium, red phosphorus and halogens such as fluorine, chlorine, bromine, iodine or astatine.
The robust plastics mobile distributor PV30 with IP44 type of protection is equally suitable for adverse operational environments in indoor and outdoor areas. Thanks to its two 16 A CEE couplings and the factory-integrated connecting cables with a length of two metres each, it can be optimally used as a power current distributor for two 16 A three-phase current devices, for example on construction sites, in the agricultural sector, at events or for the industry and commercial sector.
PV30 – the optimal connector accessory for the Multi air handler TAC XT 18
As the Multi air handler TAC XT 18 is equipped with two 16 A device plugs as a standard feature, the device can be easily connected to a 32 A socket on site and put into operation by means of an interposed PV30.
With this equipment you are in safe hands
Connector couplings:
- 2 x CEE output couplings, 16 A, 5 p, 400 V
both each with 2 m long output line, cable type H07RN-F-5G2.5
Circuit breakers:
- one 3-pole circuit breaker per output
Electrical connection:
- 2-m connecting cable H07RN-F 5G4 with CEE plug 32 A, 5 p, 400 V
Residual current device:
- The PV30 is not provided with its own residual current device. For this reason, it must be ensured that the mains connection used is equipped with a residual current device!
A few practical benefits:
- Socket combination according to EN 61439, equipped with 2 x 16 A CEE couplings and one 32 A CEE connection plug
- Input line and output lines completely ready to-connect, each with one two-metre cable of type H07RN-F
- Circuit breaker under a visual hatch window in the housing cover
- IP44 type of protection
- Fold-down V2A carrying handle
- Stackable construction
Buy
Mobiler Stromverteiler PV30
You save: 60.62 €
260.61 €
199.99 €
incl. VAT
Show net price (VAT not included)
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 6.100.002.081 | |
Electric connection | ||
Connection plug | 1 x 32 A, 5-pin, 400 V | |
Residual current device | Not available | |
Connection line | H07RN-F 5G4 | |
Cable length [m] | 2 | |
Cable cross-section [mm²] | 4 | |
Rated voltage [V] | 400 | |
Data CEE coupling | ||
Rated voltage [V] | 400 | |
Nominal current consumption [A] | 16 | |
Number of CEE couplings | 2 | |
Protective cap | ||
Connection line | H07RN-F 5G2.5 | |
Cable length [m] | 2 | |
Cable cross-section [mm²] | 2.5 | |
Safety feature | ||
Type of protection | IP44 | |
Functions and features | ||
Hinged inspection window for MCBs in housing cover | ||
Take-up facility for connection cable | ||
Locking system | ||
Fold-down V2A carrying handle | ||
Contact protection | ||
Mobility | ||
Carry/transport handle(s) | ||
Foot | ||
stackable | ||
Housing design | ||
Plastics | ||
Dimensions | ||
Length (packaging excluded) [mm] | 197 | |
Width (packaging excluded) [mm] | 197 | |
Height (packaging excluded) [mm] | 200 | |
Weight | ||
(packaging excluded) [kg] | 4.5 |
standard equipment
optionally available
not available