Deep well pump TDP 7500 E
Powerful 1,500 W stainless steel pump (INOX) with a flow rate of up to 4,800 l/h
FREE SERVICE WATER FOR YOUR HOME AND GARDEN
Become independent of the local water supplier by using the deep well pump TDP 7500 E made of stainless steel to utilize rain or ground water and thus to save money day in and day out. Making use of pumped well water considerably reduces your consumption of expensive drinking water. With 1,500 watts of power and a delivery head of 93 metres the deep well pump TDP 7500 E transports up to 4,800 litres of service water per hour from well, water reservoir or rainwater cistern. Sustainable and cost-effective! As their name implies deep well pumps are simply made for pumping water from great depths.
One pump for a variety of applications.
The deep well pump TDP 7500 E is an economical pro tool for watering thirsty plants and large lawns with pumped service water – also from greater depths. The irrigation can optionally be accomplished by connecting a garden hose, lawn sprinkler or irrigation system. Naturally, the pump TDP 7500 E ensures a sufficient pressure and performance level for the simultaneous operation of several consumers – whether they are located in the garden or your house. For the TDP 7500 E can also be used to substantially, sustainably and permanently reduce your household expenses. Application examples for the supplementary water supply include the operation of washing machines or flushing the toilet with clear water. You can save money with each laundry load rather than sending your water meter soaring as usual.
The integrated dirt strainer of the deep well pump TDP 7500 E ensures clean water with filtered out dirt particles. On top of that, rainwater is softer and contains less lime than standard tap water which proves beneficial for washing machine and water-bearing lines and components in general.
REASONABLE FROM AN ECOLOGICAL AND ECONOMICAL VIEWPOINT
Water is and will remain a valuable resource that should be treated responsibly. Your decision to purchase a TDP 7500 E is definitely the right choice – and not just in the light of global warming and climate change. In recent years, the costs for drinking water have increased noticeably and substantially. By investing in a deep well pump you become independent of these price rises and instead make use of freely available service or ground water for your own self-sufficient water supply.
Trotec's deep well pumps are highly efficient submersible pressure pumps which – due to their special design and high-quality technology – can be used in drilled wells with a minimum diameter of 11 centimetres. For the unproblematic water transport from great depths the standard equipment contains a connection cable of 23 metres length and suspension eyes for lowering the pump into wells, cisterns, drainage shafts or similar. Like all submersible pressure pumps our deep well pumps, too, are optionally suited for either fixed installation or the mobile application at various sites.
From now on treat rising costs like water off a duck's back!
Self-pumped water saves money in the long run and the space requirements for a well of your own aren't all that grand. With a diameter of 10 cm the TDP 7500 E requires only a minimal working surface. Your garden's overall appearance remains unaffected. The investment for installing a well in your own garden (if not already present) will quickly redeem itself over the course of only a few years – depending on the individual usage intensity. Specialized well builders can help you in the planning and construction phase of your own garden well.
Prime quality and workmanship
The watertight pump housing made of stainless steel (INOX) satisfies even the highest corrosion-related requirements and protects the maintenance-free copper motor from mechanical influences when the pump is lowered into the well. The robust and durable finishing further guarantees a long-lasting operation of the pump in continuous underwater application. Designed for maximally maintenance-free operation, the TDP 7500 E comes equipped with a stainless steel dirt strainer that provides protection against the contamination with particles to a size of 2.3 mm, a check valve with backflow preventer and a thermal circuit breaker.
Convenient and sophisticated:
The 23 m underwater cable permits a convenient power supply and the external control box with on/off switch can be operated from a location that is far away from the pump's installation site. For lowering the pump using a rope the pump housing has two practical suspension eyes located at the top of the device.
MAXIMALLY SECURED, DUST- AND WATER-PROOF
When water and electricity flow through a device at the same time, state-of-the-art protective devices are a must. With a deep well pump in watertight encapsulation you are always on the safe side. The TÜV-tested TDP 7500 E is dust- and water-proof as per protection type IP68. Accordingly, the pump can be left inside the well even during periods of non-use. Thanks to protection type IP44 the splash-proof control box can also be assembled in outdoor areas sheltered from the rain.
Submersion depth, delivery head and flow rate
With a high pressure of max. 9.3 bar, a maximum delivery head of 93 metres and a submersion depth of up to 20 metres the TDP 7500 E comes optimally prepared for pumping clear water from wells, rainwater cisterns and other alternative water sources situated at great depth. Due to their compact diameter of only 100 mm the pump can be used in narrow bore hole diameters starting at 110 mm.
Finding a suitable deep well pump that meets your individual requirements
The water consumption of a lawn sprinkler depends on the hose diameter and the feed pump's water pressure.
Here is a rule of thumb for determining at least an approximate water demand: A customary lawn sprinkler needs roughly 800 to 1,200 litres of water per hour*
*depending on the water pressure
The further up the deep well pump has to transport the water, the lower will be the water pressure and the maximum flow rate in litres per hour. For this reason you should make sure the pump you choose is sufficiently dimensioned. Calculate the anticipated water demand and then decide in favour of the TDP deep well pump that best meets your individual requirements.
The deep well pump TDP 7500 E transports up to 4,800 litres per hour which – depending on the delivery head – is sufficient for the simultaneous water supply of several sprinklers.
If you want to supply more sprinklers with service water from the well at the same time, we recommend the deep well pump TDP 5500 E – it achieves a delivery head of up to 58 metres. With a flow rate of 6,000 litres per hour it also permits a sufficient pressure level for the parallel operation of several lawn sprinklers.
A suitable pump for any application scenario
A less powerful deep well pump would also be sufficient? If your answer is yes, we recommend the TDP 5500 E with a delivery head of 58 metres and a conveying capacity of 6,000 litres per hours. Depending on your individual requirements Trotec's submerged clear water pumps TWP 4005 E, TWP 7505 E and TWP 9005 E recommend themselves with a delivery head of up to 11.5 metres and flow rates ranging up to 14,000 litres per hour. With a delivery head of up to 11 metres and flow rates of up to 15,000 litres per hour the submerged waste water pumps TWP 4025 E, TWP 7025 E and TWP 11025 E from Trotec are also suitable for pumping contaminated water. With a delivery head of 42 metres and a flow rate of 3,300 litres per hour the garden pump TGP 1000 E comes optimally prepared for watering applications. Without difficulty the domestic water supply system TGP 1025 E can be integrated into an existing domestic supply network and reaches a delivery head of 30 metres as well as a flow rate of 3,300 litres per hour.
Special equipment features of the TDP 7500 E
A few practical benefits:
- Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
- Stainless steel dirt strainer
- IP68 type of protection for the pump – dust-proof and suitable for continuous underwater use
- IP44 type of protection for the control box – splash-proof
- External switchbox
- Reliable check valve preventing backflow of the conveyed medium
- 2 suspension eyes for lowering the pump using a rope
- 23 m underwater cable
Best quality guarantee
With the TDP 7500 E you are always on the safe side, for this deep well pump is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.
Brand quality plus cost-efficiency
Reliable, powerful and suited for the most challenging fields of application:
these are some of the quality features of Trotec's deep well pumps. Thanks to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!
|Mains connection||220 - 240 V/50 Hz|
|Max. power input [W]||1,500|
|Pump capacity [W]||750|
|Cable length [m]||23|
|Max. conveying capacity [l/h]||4,800|
|Feed pressure [bar]||9.3|
|Grit of pump [mm]||2.3|
|Solids content in water [%]||0.25|
|Max. delivery head [m]||93|
|Number of phases||1|
|Max. water temperature [°C]||35|
|Max. submersion depth [m]||20|
|Minimum operating depth [mm]||930|
|Min. drill hole diameter [mm]||110|
|Ambient temperature - min. [°C]||0|
|Ambient temperature - max. [°C]||35|
|Type of protection||IP68|
|Connection plug||CEE 7/7|
|Cable length control box [m]||0.94|
|Protection type of the control box||IP44|
|Functions and features|
|Thermal overload protection|
|Thermal overload protection [° C]||100|
|Dry run protection|
|Stainless steel screws|
|Use of a suspension cord|
|Suitable for both permanent operation (>10h) or salt-water operation|
|Threaded connection||1 1/4"|
|Accessories scope of delivery|
|Suitable for hose (hose DN)|
|Suitable for thread|
|Tear-resistant nylon cord, 12 m|
|Length (packaging excluded) [mm]||100|
|Width (packaging excluded) [mm]||92|
|Height (packaging excluded) [mm]||930|
|(packaging excluded) [kg]||15.5|