TWP 4005 E
  1. Products & Services
  2. Powertools
  3. Pumps
  4. Submerged pumps
  5. Submerged clear water pumps
  6. TWP 4005 E

Submerged clear water pump TWP 4005 E, near-ground suction

Wipe-dry with a minimal residual water level due to near-ground suction

Impressive 400 watts of power for pumping up to 7,000 litres per hour

The compact submerged clear water pump TWP 4005 E wows homeowners and passionate amateur gardeners alike with its high capacity and the user-friendly handling characteristics. The maximum feed rate of 7,000 litres per hour recommends the TWP 4005 E as much as the extraordinary pump height of 7.5 metres. An integrated check valve prevents the return flow upon switch-off. 

With its powerful and maintenance-free 400 W motor the submerged clear water pump TWP 4005 E conveys clear or only slightly contaminated water with particle sizes of up to 5 millimetres. The submerged pump drains flooded basements and laundry facilities at a remarkable speed. It can be used to empty swimming pools in a trice and further leaves a good impression when pumping over the water in cisterns and rain barrels that are full to the brim. An integrated backflow preventer keeps the hose from running dry after shutdown and so reduces the time to restart suction.

A residual water level of no more than 3 mm – simply mop it up and you're done!

Moreover, the clear water pump is ideally suited for drying shallowly flooded surfaces f.i. in basements or swimming pools quickly and thoroughly. For the near-ground suction of the TWP 4005 E needs a water level of no more than 80 mm to start the internal pump wheel. Then the device pumps level ground "wipe-dry", i.e. to a residual water level of only 3 mm.

The watertight (encapsulation) and impact-resistant plastic housing of the device is suitable for underwater application to an immersion depth of 7 metres. With the integrated thermal protection circuit activated by overheating of the device the pump is also perfectly equipped for time-consuming applications. The high-quality ceramic face seal and a low-wear shaft further ensure extreme durability.

Easy-to-handle TWP 4005 E – compelling

Thanks to the steplessly lockable float switch it is conceivably easy to operate the TWP 4005 E. The device will be switched on and off automatically depending on the specified height of the water level. An increased flexibility during automatic operation is ensured by the dry run protection. Manual operation is also possible with a low water level by locking the float switch horizontally in the position for continuous operation.

The practical integrated float switch controls the water level in the container to be drained. When set to automatic operation, the pump switches on and off automatically according to the height of the float switch. In continuous operation the pump permits near-ground suction to a residual water level of 3 mm.

The sturdy ergonomic carrying handle facilitates easy transporting in the garden or to any other application site and optimizes the handling of this compact device. It can further be used as pump suspension option using the supplied nylon cord, e.g. for lowering the pump down into a swimming pool. With universal connections at the elbow for inner diameters of 25 mm and 32 mm as well as with threaded connectors of 1'' and 1½'' further hose connections can be established without further ado. The elbow's position can be freely adjusted, as a result it is possible for hoses and pipes to run parallel to the ground. The power cable of 10 m length offers flexibility and a wide operating range.


Special equipment features of the TWP 4005 E

Particle size: 5 mm
The submerged clear water pump TWP 4005 E conveys clear or only slightly contaminated water with particle sizes of up to 5 millimetres.
Ceramic face seal
The high-quality ceramic face seal and a low-wear shaft extend the pump’s lifetime.
Integrated backflow preventer
The integrated backflow preventer (non-return valve) prevents the return flow of the water at the end of the pumping process.
Universal connections
Hoses and pipes with an inner diameter of 25 / 32 mm as well as 1‘‘ / 1½‘‘ threaded connectors can be flexibly coupled with the pump.
Steplessly adjustable float switch
The height for the pump’s automatic switch-on/-off can be reliably regulated by means of the steplessly adjustable float switch.
Near-ground suction during continuous operation to a residual water level of 3 mm
When locking the float switch in horizontal position, the pump operates continually and sucks off the water until the ground is “wipe-dry” (only 3 mm remain).
Ergonomic carrying handle
For lowering the pump into the water, the supplied 12 m nylon cord is affixed to the sturdy, ergonomic carrying handle.
Schematic overview
TWP 4005 E at one glance: Combined display of relevant performance values such as the switch-on/switch-off point, pump height and submersion depth.

The TWP 4005 E is extremely versatile

Suitable to an immersion depth of 7 metres
Up to an immersion depth of 7 metres, the pump is ideally suited for all applications in clear or only slightly contaminated and chlorinated water.
For use in slightly contaminated water as collected in rain barrels
With the submerged pump TWP 4005 E pumping off or recirculating the slightly contaminated water from cisterns or rain barrels can be accomplished in a trice.
Draining in the staircase to the basement
The basement steps have been flooded owing to heavy rain? If the water to be pumped off is only slightly contaminated, this does not constitute a problem for the clean water pump TWP 4005 E.
Application in swimming pools
Used in swimming pools or laundry rooms – the submerged clear water pump TWP 4005 E with near-ground suction pumps level ground “wipe-dry”, i.e. to a residual water level of only 3 mm.
Technical data in comparison

All submerged pumps in direct comparison:

To find the submerged pump which exactly meets your requirements, please consult the concise overview of all submerged pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Impressive 400 watts of power for pumping up to 7,000 litres per hour
  • Maximum pump height: 7.5 m
  • Ideally suited for draining flat surfaces and for the recirculation and suction of water e.g. from swimming pools and basements or after a washing machine has sprung a leak
  • For effortless pumping of clear water with suspended particles sized up to 5mm
  • Extremely durable due to ceramic face seal
  • Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
  • Automatic switch-on/-off due to steplessly adjustable float switch
  • Dry run protection during automatic operation
  • Fixing option for the float switch during automatic operation
  • Near-ground suction to a level of 3mm resulting in a wipe-dry floor
  • IPX8 type of protection – protected against the ingress of water upon immersion
  • Universal connection for flexible coupling
  • Backflow preventer barring a return flow
  • Large ergonomic carrying handle – suitable for fastening the lowering cable
  • Submerged pump of TÜV-tested quality

All important features at a glance

Clean water
Powerful 400 W motor
Feed rate of 7,000 litres per hour
Pump height of 7.5 metres
Immersion depth: 7 metres
A water level of no more than 80 mm is sufficient for starting the device
The device continues to operate to a residual water level of 3 mm
Slightly contaminated water with particle sizes of up to 5 millimetres
Universal connections for inner diameters of 25 mm and 32 mm
Threaded connectors of 1’’, 1¼’’ and 1½’’
Automatic device switch-on/-off
Manual continuous operation
Steplessly lockable float switch
Integrated backflow preventer
Sturdy, ergonomic carrying handle
Nylon lowering cable of 12 m length
Cable length: 10 metres
For the application in swimming pools
Use if a washing machine has sprung a leak
Scope of delivery for the submerged clear water pump TWP 4005 E

The submerged pump TWP 4005 E is supplied as complete set including reducer (with preassembled backflow preventer and seal ring), elbow, a nylon cord of 12 m length and a 10 m power cable.


Delivery head and flow rate

Pump height and feed rate of the TWP 4005 E

With the TWP 4005 E you are always on the safe side, for this submerged clear water pump is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.

Brand quality plus cost-efficiency

Reliable, powerful and suited for the most diverse clear water applications: Those are some of the quality features of Trotec's submerged clear water pumps. No matter the demands, owing to their high capacity these pumps are never out of their depth. HighPerformance in every respect – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!

Tested for safety, TÜV GS ID 1419062842

Shop

Klarwasser-Tauchpumpe TWP 4005 E im Trotec Webshop zeigen

Klarwasser-Tauchpumpe TWP 4005 E

Die kompakte Klarwasser-Tauchpumpe TWP 4005 E begeistert mit ihrer Leistungsstärke und benutzerfreundlichen Handhabung gleichermaßen Hausbesitzer wie passionierte Hobbygärtner. Die max. Fördermenge von 7.000 l/h spricht ebenso für die TWP 4005 E wie die außerordentliche Förderhöhe von 7,5 Metern.

Sie sparen: 45 %

54.95 € 29.99 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Technical data

Technical data
General information
  Article number 4.610.000.005
Electrical values
  Mains connection 230 - 240 V/50 Hz
  Power input [kW] 0.4
Electric connection
  Connection plug CEE 7/4 (Schuko plug type F)
  Cable length [m] 10
Performance data
  Max. conveying capacity [l/h] 7,000
  Grit of pump [mm] 5
  Max. delivery head [m] 7.5
  Max. submersion depth [m] 7
  Minimum operating depth [mm] 80
  Max. water level after suction [mm] 3
  Max. water temperature [°C] 35
Safety feature
  Type of protection IPX8
  Protection class I
Functions and features
  On/off switch (float switch) Automatic
  Switch-on point float switch [mm] 420
  Switch-off point float switch [mm] 180
  Thermal overload protection
  Backflow preventer
  Stainless steel screws
  Suitable for both permanent operation (>10h) or salt-water operation
Housing design
  Plastics
  Aluminium
  Stainless steel
  Steel
Accessories scope of delivery
  Adapter
  Hose connection (inner diameter) 25 / 32 mm
  Threaded connection 1" , 1 ½"
  Backflow preventer
Dimensions
  Length (packaging excluded) [mm] 220
  Width (packaging excluded) [mm] 160
  Height (packaging excluded) [mm] 290
Weight
  (packaging excluded) [kg] 3.6

 standard equipment

 optionally available

 not available

Alternative products

Loading...

Accessories

Loading...

Seminars

Downloads

Loading...