Submerged waste water pump TWP 4025 E
Powerful suction plus effectiveness – the ideal solution for house and garden
Impressive 400 watts of power for pumping up to 7,500 litres per hour
Contaminated water in the house, garden or well should be pumped off as quickly and as effectively as possible – the thoroughly robust and powerful submerged waste water pump TWP 4025 E is perfectly suited for this purpose. It meets every challenge and transports water containing dirt particles sized up to 25 millimetres.
The submerged waste water pump TWP 4025 E reliably transports up to 7,500 litres of contaminated water per hour up to a pump height of 5 metres with a power consumption of 400 W. Flooded basements and living spaces are quickly rendered accessible again, and building or waste water pits can be emptied just as effectively as ponds, tanks or cisterns. Thanks to the pump's high conveying capacity, water can be quickly and easily withdrawn from lakes, ponds or rivers for lawn sprinklers or complex irrigation systems. Naturally, the submerged pump TWP 4025 E is also suited for transporting clear water.
Robust and durable quality
The TWP 4025 E is also perfectly equipped for long-term applications, for the device comes with both a maintenance-free motor and an integrated thermal protection circuit. Furthermore, the high-quality ceramic face seal and a low-wear shaft ensure extreme durability.
The watertight (encapsulation) and impact-resistant plastic housing of the TWP 4025 E is suitable for underwater application to an immersion depth of 5 metres. The robust pump can be put into operation as of a water level of only 90 mm. Once switched on, the device pumps off the waste water until reaching a residual water level of 35 mm.
With a pump height of up to 5 metres, the pump is able to transport water from a flooded basement to the next higher floor and thus out of the house.
The TWP 4025 E combines functional variety with easy handling
The steplessly lockable float switch of the TWP 4025 E offers the option to choose between automatic and manual continuous operation. In automatic mode, the device is switched on or off depending on the preselected water level, while the dry run protection stops pump operation automatically if the water level drops too low. If, however, the float switch is locked horizontally in the position for permanent operation, the device will operate in continuous mode.
With universal connections for inner diameters of 25 mm and 32 mm as well as with threaded connectors of 1'' and 1½'' further hose and also pipe connections can be established conveniently. The elbow's position can be set to various positions as desired so that it is possible for hoses and pipes to run parallel to the ground. The stable, ergonomic carrying handle additionally facilitates the handling of the compact submerged waste water pump and can also be used for suspending the device at the supplied nylon cord. Thanks to a 10 metre connecting cable the pump can be quickly installed, and using the suspension cord the pump can be easily lowered into the water and raised again when required.
Special equipment features of the TWP 4025 E
Whether waste or clear water – the submerged pump TWP 4025 E won't let you down
All submerged pumps in direct comparison:
To find the submerged pump which exactly meets your requirements, please consult the concise overview of all submerged pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Impressive 400 watts of power for pumping up to 7,500 litres per hour
- Maximum pump height: 5 m
- Ideally suited for water withdrawal as well as for recirculation and suction of water e.g. for swimming pools, basements, rain barrels, garden ponds, small building pits, flooding
- For effortless pumping of clear and waste water containing dirt and suspended particles sized up to 25 mm
- Extremely durable due to ceramic face seal
- Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
- Automatic switch-on/-off due to steplessly adjustable float switch
- Dry run protection during automatic operation
- Fixing option for the float switch during automatic operation
- IPX8 type of protection – protected against the ingress of water upon immersion
- Universal connection for flexible coupling
- Large ergonomic carrying handle – suitable for fastening the lowering cable
- Submerged pump of TÜV-tested quality
All important features at a glance
With the TWP 4025 E you are always on the safe side, for this submerged waste water pump is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.
Brand quality plus cost-efficiency
Reliable, powerful and suited for the most challenging fields of application: those are some of the quality features of Trotec's submerged waste water pumps. Thanks to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!
Verunreinigtes Wasser in Haus, Garten und Brunnen sollte möglichst schnell und effektiv abgepumpt werden – ideal eignet sich dazu die durch und durch robuste und leistungsstarke Schmutzwasser-Tauchpumpe TWP 4025 E. Sie transportiert Wasser mit bis zu 25 Millimeter großen Schmutzpartikeln.
Sie sparen: 45 %
54.94 € 29.95 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen
|Mains connection||230 - 240 V/50 Hz|
|Power input [kW]||0.4|
|Connection plug||CEE 7/4 (Schuko plug type F)|
|Cable length [m]||10|
|Max. conveying capacity [l/h]||7,500|
|Grit of pump [mm]||25|
|Max. delivery head [m]||5|
|Max. submersion depth [m]||5|
|Minimum operating depth [mm]||90|
|Max. water level after suction [mm]||35|
|Max. water temperature [°C]||35|
|Type of protection||IPX8|
|Functions and features|
|On/off switch (float switch)||Automatic|
|Switch-on point float switch [mm]||450|
|Switch-off point float switch [mm]||210|
|Thermal overload protection|
|Stainless steel screws|
|Suitable for both permanent operation (>10h) or salt-water operation|
|Accessories scope of delivery|
|Hose connection (inner diameter)||25 / 32 mm|
|Threaded connection||1" , 1 ½"|
|Length (packaging excluded) [mm]||220|
|Width (packaging excluded) [mm]||160|
|Height (packaging excluded) [mm]||310|
|(packaging excluded) [kg]||3.7|