Garden pump TGP 1000 E
Powerful 1,000 W pump for all watering applications!
HIGH PERFORMANCE FOR EFFICIENT WATERING
It usually takes a lot of effort to irrigate a large area of lawn, flowerbeds, shrubbery and trees evenly. Not with the garden pump TGP 1000 E – it is a top-notch aid in accomplishing these tasks. The solid, yet ultra-light entry-level model in compact design comes with a rust-proof pump housing made of impact-resistant plastic.
With impressive 1,000 watts of power it can be used to pump up to 3,300 litres of service water per hour. The pump can suck up water from a lower position up to a suction head of 7 metres. This includes ponds, wells, cisterns or even running water such as streams. The pump can convey the sucked-in water up to a delivery head or range of 42 metres.
By connecting a hose distributor you can simultaneously water multiple zones through sprinklers, spray guns or micro drip systems. This garden pump is also a convenient tool for the seasonal draining or recirculation of water from ponds or water barrels.
HIGH-QUALITY MATERIALS – EXCELLENT WORKMANSHIP
The pump housing of the TGP 1000 E is splash-proof from all directions as per protection type IPX4 and made of impact-resistant plastic and of metal coated with protective paint. The corrosion-resistant aluminium winding motor and high-quality ceramic face seal guarantee a long lifetime. At the suction and pressure connections the pump has a solid metal threading with an inner diameter of 1'' or 3.33 cm (G1). The integrated thermal protection circuit prevents the maintenance-free motor from overheating.
All-in-one solution supplied ready for connection.
The pump can be switched on or off manually at a switch. Owing to the large inlet opening the pump can quickly and easily be filled with a little water prior to start-up. When storing the device for an extended period of time, e.g. during the winter, any residual water can easily be discharged via the water drain screw – as a result, the TGP 1000 E is protected against potential frost damage.
High degree of flexibility using either permanent installations or devices for mobile application
Garden pumps are suitable for both: they can be permanently installed or used as mobile devices. This makes them extremely versatile. With the ergonomically shaped carrying handle the garden pump can quickly and easily be transported to the desired application site. We recommend permanently installed versions when the pump is always used at the same location. Should it, for instance, always be used for pumping water from a cistern, a fixed installation that can be accomplished in just a few steps is the best choice. For stationary operation at a fixed location we also supply a stable pump foot with bore holes for secure fastening.
SAVING TAP WATER EQUALS SAVING MONEY
A garden always needs water. Be it for watering, cleaning or recreational activities. But instead of using expensive and elaborately treated drinking water you can employ the garden pump TGP 1000 E and save money by making use of the abundant supply of rain or ground water nature delivers to your home for free.
The economical all-rounder – not just for pumping applications in the garden
Regardless of whether you want to pump water from a well, cistern, rain barrel or a body of flowing water – at the push of a button the powerful pump supplies free water for work with a high-pressure cleaner, e.g. to clean terraces or walkways or else as a means to car valeting.
When no drinking water quality is required, the garden pump TGP 1000 E can draw water from alternative sources and so reduce the consumption costs in your garden.
A suitable pump for any application scenario
Depending on your individual requirements Trotec's submerged clear water pumps TWP 4005 E, TWP 7505 E and TWP 9005 E recommend themselves with a delivery head of up to 11.5 metres and flow rates ranging up to 14,000 litres per hour. TWP 4005 E TWP 7505 E TWP 9005 E With a delivery head of up to 11 metres and flow rates of up to 15,000 litres per hour the submerged waste water pumps TWP 4025 E, TWP 7025 E and TWP 11025 E from Trotec are also suitable for pumping contaminated water. TWP 4025 E TWP 7025 E TWP 11025 E Ground water can be extracted using either of the Trotec deep well pumps TDP 5500 E and TDP 7500 E. They offer delivery heads of up to 93 metres and flow rates ranging up to 6,000 litres per hour. Without difficulty the domestic water supply system TGP 1025 E can be integrated into an existing domestic supply network and reaches a delivery head of 30 metres as well as a flow rate of 3,300 litres per hour.
Special equipment features of the TGP 1000 E
A few practical benefits:
- IPX4 type of protection for the pump – splash-proof from all directions
- IP44 type of protection for the mains plug – splash-proof
- User-friendly thanks to the large inlet opening for easy filling of the pump
- Protected against frost – residual water can be discharged conveniently via the water drain screw
- Convenient on/off switch
- Integrated carrying handle for quick operational readiness at various locations
- Stable pump foot with holes for easy fastening
- TÜV-tested quality
Best quality guarantee
With the TGP 1000 E you are always on the safe side, for this garden pump is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.
Brand quality plus cost-efficiency
Reliable, powerful and suited for the most challenging fields of application: these are some of the quality features of Trotec's garden pumps. Thanks to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!
Die leistungsstarke Gartenpumpe TGP 1000 E fördert bis zu 3.300 l/h. Denn es lassen sich bis zu 3.300 Liter Nutzwasser pro Stunde aus Regenfässern, Zisternen sowie stehenden und fließenden Gewässern abpumpen und zur Bewässerung von Haus- und Gartenanlagen wiederverwerten.
Sie sparen: 50 %
89.95 € 44.95 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen
|Mains connection||230 V/50 Hz|
|Power input [W]||1,000|
|Connection plug||CEE 7/7|
|Cable length [m]||1.2|
|Max. conveying capacity [l/h]||3,300|
|Feed pressure [bar]||4.2|
|Grit of pump [mm]||2|
|Max. delivery head [m]||42|
|Max. suction height [m]||7|
|Max. water temperature [°C]||35|
|Type of protection||IPX4|
|Sound pressure level [dB(A)]||72|
|Sound power level [dB]||88|
|Uncertainty (K) [dB]||2|
|Length (packaging excluded) [mm]||210|
|Width (packaging excluded) [mm]||330|
|Height (packaging excluded) [mm]||200|
|(packaging excluded) [kg]||6|
|Equipment, features and functions|
|Functions and features|
|Automatic switch-on and switch-off||Not available|
|Electronic pressure switch||optional|
|Thermal overload protection [° C]||150|
|Water inlet opening|
|Water drain screw|
|Stainless steel screws|
|Suitable for both permanent operation (>10h) or salt-water operation|
|Dry run protection|
|Connection at pressure tank for pressure compensation|
|Standard scope of delivery|
|Accessories scope of delivery|
|Suitable for hose (hose DN)|
|Suitable for thread|
|Tear-resistant nylon cord, 12 m|