Garden pump TGP 1005 E
Garden pump TGP 1005 E
Garden pump TGP 1005 E
Garden pump TGP 1005 E
  1. Products & Services
  2. Powertools
  3. Pumps
  4. Garden pumps
  5. TGP 1005 E

Garden pump TGP 1005 E

Pump with pre-filter and an impressive 1,000 watts – up to 3,300 litres per hour for garden and household

TGP 1005 E – drawing water from the garden pond
TGP 1005 E – watering the garden
TGP 1005 E – watering the lawn and flower bed

Clever pumping pays off!

Water is a precious resource – if we didn't feel that before, the dry, hot summers of the last years have shown us that much. Therefore we should handle this resource responsibly. Utilizing existing, or, even better, collected water is the perfect solution here. And with the TGP 1005 E from Trotec this becomes as easy as that.

Saving money easily with the use of service water

The impressive 1,000-watt garden pump is provided with an on/off switch and pumps up to 3,300 litres of process water per hour from rain barrels, cisterns, wells as well as standing and running waters. In this process, the water can be sucked off from a depth of up to 7 metres and transported further to a height or range of up to 42 metres – e.g. to actuate sprinklers, micro-drip systems and further watering installations. With the TGP 1005 E this makes it possible for you to water your flower beds, vegetable patches, trees, shrubs, lawns, front gardens easily with free-of-charge service water – without wasting precious drinking water for this purpose.

Robust design for a long service life

Against dirt particles sized from 1 mm, the TGP 1005 E is equipped with a practical pre-filter, which does not only clean the water that is pumped, but also protects the pump against soiling and interior damage. The robust, corrosion-resistant pump housing consists of metal coated with protective paint and impact-resistant plastic. Furthermore the garden pump is protected by IPX4 protection type against splash water from all sides. Moreover, the integrated thermal protection switch reliably prevents overheating of the motor. To provide for flexible use and easy transport, the device with its light weight of only 6.5 kg is equipped with an ergonomically shaped carrying handle. In the case of stationary operation in a fixed location the stable pump foot can be mounted firmly to the ground, thanks to the drill holes that are already available.

Including pre-filter against dirt particles

On the water filling hole the TGP 1005 E is provided with a fine filter, which filters pebbles, plant parts and coarse dirt particles from the water with its close meshed Nylon mesh. The sucked-in water is piped through the filter and the coarse particles do not enter the pump interior. This protects the pump against soiling, blockages, congestions and damage. Furthermore, blockages of outlet nozzles, e.g. of lawn sprinklers are avoided, as are dirt deposits in pipes or hoses. Trouble-free pumping and reliable watering are therefore permanently ensured.

The transparent sealing cap of the water filler neck can be opened especially conveniently using the wrench contained in the scope of delivery. Cleaning the pre-filter is also easily and quickly accomplished: pull out the pre-filter, tap it out and then rinse it under running water.

Durable, flexible connectable and TÜV-certified

Designed for maximum durability, the TÜV-tested garden pump is equipped with an extremely corrosion-resistant aluminium winding motor with a high-quality ceramic face seal. The stable metal threads (inside diameter 1“ or 3.33 cm (G1)) of the suction and pressure connections allow for the connection of flexible hose lines – the pump can also be connected to fixed pipes with a corresponding diameter. Owing to the large inlet opening the pump can quickly and easily be filled with a little water prior to start-up. When storing the device for an extended period of time, e.g. during the winter, any residual water can easily be discharged via the water drain screw – as a result, the TGP 1005 E is protected against potential frost damage.  

Tip: To ensure an especially dense connection between the pressure line and pressure connection, it is generally usual for garden pumps to wrap sealing tape − e.g. Teflon tape − around the thread.

TGP 1005 E – prefilter
TGP 1005 E – prefilter in use
TGP 1005 E – stationary operation possible
TGP 1005 E – cooling in the summertime
TGP 1005 E – installation of the garden pump
TGP 1005 E – cleaning the driveway

Extremely versatile

The compact garden pump is put into operation by the on/off switch at the side. Whether you utilize it for the garden, for cleaning work or for recirculation and suction – the versatile all-round pump reliably supplies commercially available sprinklers, garden hoses or high-pressure cleaners with water.

Ideal for watering lawns, flower beds, plants and trees

If you're investing a lot of time and money into your greens, you'll naturally want to keep them in perfect condition as well as possible, even in hot and dry summers. With the garden pump TGP 1005 E you don't need to waste expensive tap water for watering. For your watering tasks, rely on service water that is pumped free-of-charge instead. This saves money and you can nevertheless enjoy your garden in lush green and in full bloom.

Easy draining and recirculation

Whether you take it from the rain barrel, the cistern or the reservoir – with the TGP 1005 E draining and recirculation of large quantities of water is no problem. Thanks to the integrated pre-filter water can also be drawn from ponds, streams and stretches of running water. In this process, the suction hose, however, must not be placed in the muddy, sandy or pebbly ground area but should only suck in clear water, if possible.

Bathing fun in your own garden

Swimming pools and inflatable paddling pools can be quickly filled with the TGP water pump to ensure untroubled bathing fun. And when winter approaches the water is easily drained again to avoid damage caused by the formation of ice.

Water for cleaning

There are mud stains on your car or the heavy rainfall has left trails of dirt around the house? No problem. Use a high-pressure cleaner to easily hose down the car, the terrace, natural stone floors or the pavement. This does not require any treated drinking water, you can also use clear river water or rainwater collected in a barrel to get everything nicely clean again.


Special equipment features of the TGP 1005 E

With impressive 1000 watts of power the TGP 1005 E can be used to pump up to 3,300 litres per hour or 55 litres per minute.
TGP 1005 E – high pump capacity
The pump is provided with a pre-filter, which holds back coarse dirt, small stones or plant parts from a size of 1 mm. This serves to protect the pump interior from soiling or damage. The sealing cap can be opened especially easily by means of the wrench supplied.
TGP 1005 E – prefilter
The ON/OFF switch is installed readily accessible at the side of the pump and comes with a protective cover.
TGP 1005 E – convenient on/off switch
With the convenient carrying handle the pump can be transported quickly and easily from one application site to the next and for permanent stationary application the garden pump can be firmly affixed via bore holes in the pump foot.
TGP 1005 E – carrying handle/affixable pump foot
Robust design: the pump housing is splash-proof from all directions as per IPX4 type of protection. The black housing parts consist of impact-resistant plastic, the yellow elements are designed of metal coated with protective paint.
TGP 1005 E – robust housing
The garden pump comes equipped with a high-quality ceramic face seal, robust metal threading at the suction and pressure side, its maintenance-free aluminium winding motor has a high corrosion resistance and an integrated thermal protection circuit prevents overheating.
TGP 1005 E – maintenance-free aluminium winding motor
Owing to the large inlet opening the pump can be filled quickly and easily. Any residual water can easily be discharged without the need for tools via the water drain screw.
TGP 1005 E – pump is easily filled
The garden pump TGP 1005 E comes with a maximum delivery head of 42 metres and a maximum suction head of 7 metres. Particles sized up to 2 mm can be conducted through the pump, coarser particles are retained by the integrated pre-filter.
TGP 1005 E – delivery head and suction head

A few practical benefits:

  • Impressive 1,000 watts of power for pumping up to 3,300 litres per hour
  • Maximum delivery head: 42 m, suction head up to 7 m
  • Integrated pre-filter for protection against coarse dirt particles (> Ø 1 mm)
  • Ideally suited for the withdrawal and recirculation and suction of water e.g. for rain barrels, cisterns and garden ponds
  • Effortless watering of the garden in continuous mode until manual switch-off
  • Robust pump housing made of impact-resistant plastic as well as metal coated with protective paint; high corrosion resistance due to aluminium winding motor
  • Stable metal threads both on the suction and pressure side
  • High-quality ceramic face seal for a long lifetime
  • Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
  • For the pumping of clear water with suspended particles sized up to 2 mm
  • IPX4 type of protection for the pump – splash-proof from all directions
  • IP44 type of protection for the mains plug – splash-proof
  • Connections of the pressure and suction line with 1" internal thread
  • User-friendly thanks to the large inlet opening for easy filling of the pump
  • Protected against frost – residual water can be discharged conveniently via the water drain screw
  • Convenient on/off switch
  • Integrated carrying handle for quick operational readiness at various locations
  • Stable pump foot with drill holes for permanent fitting

All important features at a glance

Clean water
Ground water
Powerful 1,000 W motor
Flow rate of 3,300 litres per hour
Feed pressure of 4.2 bar
Delivery head of 42 metres
7 metres suction head
Pre-filter
Clean water with particle sizes of up to 1 millimetres
1" threaded connection
Protection type IPX4 – sealed against spray water from all directions
Cable length: 1.2 metres
For pumping ground water
For the application in swimming pools
For the application in garden ponds
For the application in wells
 
 

Delivery head and flow rate of the TGP 1005 E

Delivery head and flow rate of the TGP 1005 E

Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority TÜV Rheinland certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.

Brand quality plus cost-efficiency

Reliable, powerful and suited for the most challenging fields of application: these are some of the quality features of Trotec's garden pumps. Owing to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!

Tested for safety, TÜV GS ID 1419076674
Technical data by comparison

All garden pumps in direct comparison:

To find the garden pump which exactly meets your requirements, please consult the concise overview of all garden pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

Buy

Technical data

Technical data
General information
  Article number 4.610.000.110
Electrical values
  Mains connection 230 V/50 Hz
  Power input [W] 1,000
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 1.2
Performance data
  Max. conveying capacity [l/h] 3,300
  Feed pressure 4.2
  Grit of pump [mm] 2
  Max. delivery head [m] 42
  Max. suction height [m] 7
  Automatic switch-on
  Automatic switch-off
  Max. water temperature [°C] 35
  Pressure connection 1"
  Suction connection 1"
Safety feature
  Type of protection IPX4
  Protection class I
Sound values
  Sound pressure level [dB(A)] 72
  Sound power level [dB] 88
  Uncertainty (K) [(K)] 2
Housing design
  Plastic version
Certificates
  CE declaration
  TÜV Rheinland
Dimensions
  Length (packaging excluded) [mm] 200
  Width (packaging excluded) [mm] 400
  Height (packaging excluded) [mm] 210
Weight
  (packaging excluded) [kg] 6.5
Equipment, features and functions
Functions and features
  ON/OFF switch
  Automatic switch-on and switch-off Not available
  Energy-saving
  Mechanical pressure switch
  Electronic pressure switch optional
  Pressure gauge
  Thermal overload protection [° C] 150
  Water inlet opening
  Water drain screw
  Backflow preventer
  Stainless steel screws
  Suitable for both permanent operation (>10h) or salt-water operation
  Dry run protection
  Overheating protection Available
Standard scope of delivery
Accessories scope of delivery
  Carrying handles
  Adapter
  Suitable for hose (hose DN)
  Suitable for thread
  Backflow preventer
  Tear-resistant nylon cord, 12 m
  Filter

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...