Cordless work light PWLS 10-20V
For a flexible illumination covering larger areas or with pin-point precision. With 300 lumina. Without cable.
2-in-1 solution: Light-intense LED tube light with integrated inspection lamp as torch
Whether for use in a workshop or garage, underneath vehicles, in a basement or attic, in new buildings or summerhouses – there are numerous possible application sites with need for action but little light. At these locations the portable cordless work light brings bright light into the darkness – for good lighting conditions even in poorly accessible workplaces.
The versatile PWLS 10-20V is the perfect work light for all activities in the craft sector and should be a part of every household, for it can be used at any given location –there is no need for a nearby socket.
The freedom of cordless use of the PWLS 10-20V is made possible by its 20 V Flexpower multi-device battery with a charging capacity of 2 Ah. This high-quality premium branded NMC battery can not only be flexibly combined with other cordless Trotec tools, it also always provides its full power until the end even as the charge decreases.
With a luminous flux of 300 lm and a burn time of about 8 hours the cordless work light PWLS 10-20V allows you to benefit from constant bright light even during longer operation.
And in case you are not fully satisfied with this performance alone, the optionally available 4 Ah Flexpower multi-device battery allows you to illuminate your surroundings for twice as long as with the supplied 2 Ah Flexpower battery.
Flexpower: allowing flexible combinations
The PWLS 10-20V is supplied with a 20 V Flexpower multi-device battery. This long-lasting lithium-ion battery is part of the Trotec Flexpower system and can also be used with other 20 V power tools from the Trotec product range.
For extra-long working periods the PWLS 10-20V can be used in combination with the optionally available 4 Ah Flexpower multi-device battery that doubles the lighting duration.
Naturally, this work light is also available without battery in the version PWLS 10 – for all users that have already purchased a 20 V Flexpower multi-device battery.
As versatile as your requirements
Two stable and ingeniously angled joints are the reason that the PWLS 10-20V can be adjusted quickly and easily into almost any lighting position. Whilst the tilting joint with 7 lock-in positions allows for a radius adjustment of 180°, the work light can simultaneously be rotated by 270° by means of the swivel joint. With the combined adjustment of both joints the luminous field can be angled as needed to any target position.
For a fatigue-free application of the hand-held PWLS 10-20V its particularly ergonomic handle is not only fitted with soft grip inlays ensuring a firm and secure grip without slipping ... No, the device allows for further optional usage positions: free-standing, lying or even suspended. A suspension hook integrated in the head permits the quick and simple suspension.
Another piece of the standard scope of delivery is the mountable belt clip that facilitates quick access when taking the work light along with you.
Here a lucid explanation of the advantages provided by the PWLS 10-20V
With the cordless work light PWLS 10-20V you basically buy two lamps in one. With 300 lm, the integrated panel light coming in the shape of a highly luminous LED tube light guarantees brightly illuminated work areas. Owing to an additional LED located in the lamp's head the device can be used as full-fledged torch with a luminous intensity of 110 lux. This operating mode is ideally suited for the pinpoint illumination of confined areas. The switch-over from panel light to torch can be accomplished by nothing more than the push of a button.
Flexpower – the innovative multi-device battery system from Trotec
Even the standard scope of delivery of this power tool from Trotec already includes a powerful 20 V multi-device battery from the Trotec Flexpower portfolio with a high charging capacity of 2 Ah. You can check the current charging status via the three-stage battery level indication that is integrated in the battery housing and clearly visible at one glance.
This power pack that can be fully charged in about an hour not only enables device runtimes extended by up to 33 % – as compared to standard batteries with only 1.5 Ah – moreover, this Flexpower multi-device battery can also be flexibly combined with different Trotec tools, including i.a. the cordless rotary hammer PRDS 10-20V, the cordless multi-function tool PMTS 10-20V, the cordless portable circular saw PCSS 10‑20V, the cordless work light PWLS 10‑20V, the cordless drill driver PSCS 11‑20V, the cordless hammer drill PHDS 11‑20V, the cordless grass and shrub shears PGSS 10-20V, the Cordless compressor PCPS 11‑20V and air pump PCPS 12‑20V or the cordless pendulum action jigsaw PJSS 11-20V.
Thanks to Flexpower you can do without unnecessary batteries and chargers – and the search for a suitable battery has also come to an end. Simply change the device, not the battery. Flexpower puts a stop to the unnecessary amount of various exchangeable batteries; the combination option with an ever increasing number of tools allows you flexibility at all times so you can carry on your projects energetically!
Premium branded battery for constantly full power
By now, lithium-ion batteries are widely distributed, after all they come without memory effect and self-discharge. Plus these batteries can be disconnected from the charger and used right away without it affecting the battery’s lifetime. But “lithium ions” is a generic term used for batteries of various qualities and made of diverse electrode materials; including those with a perceptibly weakening performance once the battery charge decreases.
Lithium-ion batteries supplied by Trotec are high-quality premium branded NMC batteries with a high energy density and charging voltage lasting until the end without exceptions – guaranteed! Compared to conventional lithium-ion batteries the performance of our premium branded batteries does not decrease even as the discharge increases.
Consequently, you benefit from lasting maximum power even with an almost empty battery. During longer operation only the battery charge decreases, never their performance – that is the added value of Trotec’s premium branded batteries!
The key equipment features of the PWLS 10-20V at a glance
The PWLS 10-20V offers manifold application options
All work lights in direct comparison:
To find the work light which exactly meets your requirements, please consult the concise overview of all work lights from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Light-intense, branded work light in TÜV-tested quality
- Flexpower multi-device battery system – can be flexibly combined also with other cordless tools from Trotec
- Powerful 20 V lithium-ion battery without memory effect and self-discharge
- Flexible orientation of the lamp head: can be rotated by 270° and tilted by 180°
- 2-in-1solution: Light-intense LED tube light with integrated inspection lamp as torch
- Enabling both pinpoint and large-scale illumination
- High-performance LED with a luminous flux of 300lm
- Quick charger with automatic charge termination: only 1 hour of charging required
- Three-stage battery level indication
- Soft grip rubber inlays in the housing for extra firm hold
- Integrated suspension hook for simple attachment
- Mountable belt clip facilitates access and transport
All important features at a glance
Brand quality plus cost-efficiency
So far, you basically only had two options when choosing a cordless work light: either good but expensive, or mainly cheap.
Trotec's PowerTools now offer a smart choice: good and cheap at the same time. For we do not only stand for measuring devices and air conditioners, but also for power tools of brand quality: professional Trotec solutions with an excellent value-for-money ratio!
Die Akku-Arbeitsleuchte PWLS 10‑20V ist eine lichtstarke LED-Stableuchte mit integriertem Handstrahler. Die Arbeitsleuchte besitzt nicht nur eine Flächenfunktion, sondern auch eine Taschenlampenfunktion.
Sie sparen: 45 %
54.94 € 29.95 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen
|Power input Spotlight LED [W]||3|
|Luminous flux Spotlight LED [lm]||250|
|Illuminance Spotlight LED [lux]||110|
|Burn time Spotlight LED||6 h|
|Power input Surface LED [W]||3|
|Luminous flux Surface LED [lm]||300|
|Illuminance Surface LED [lux]||11|
|Burn time Surface LED||8 h|
|Functions and features|
|Flexible suspension hook|
|Wrist strap attachment|
|Battery level indication||Available|
|Electrical values battery|
|Battery nominal voltage [V]||20|
|Battery capacity [Ah]||2|
|Battery charging time [h]||1|
|Mains connection||230 - 240 V/50 Hz|
|Output voltage [V]||21.5|
|Nominal current consumption [mA]||2,400|
|Cable length [m]||1.5|
|Length (packaging excluded) [mm]||85|
|Width (packaging excluded) [mm]||70|
|Height (packaging excluded) [mm]||175|
|(packaging excluded) [kg]||0.38|
|Standard scope of delivery|
|Accessories scope of delivery|
|Number of batteries||1|