Cordless rotary hammer PRDS 10‑20V
Compact, cordless all-rounder as a 3-in-1 power pack with pneumatic hammer mechanism
High-power screwing and drilling in wood and metal plus hammer drilling in masonry and concrete
You have a lot of screwing and hammer drilling work to complete, but there is no power outlet nearby, or the cable is too short? No problem for Trotec's power pack PRDS 10‑20V. This cordless rotary hammer has everything one could expect from a powerful hammer impact tool – except for a cable.
The freedom of cordless use of the PRDS 10-20V is made possible by its 20 V Flexpower multi-device battery with a charging capacity of 2 Ah. This high-quality premium branded NMC battery can not only be flexibly combined with other cordless Trotec tools, it also always provides its full power until the end even as the charge decreases.
This is why you can benefit from up to 5000 hammer blows per minute with 1 joule of impact energy each even during longer operation of the cordless rotary hammer PRDS 10-20V – made possible by a pneumatic hammer mechanism. Thanks to this high level of power you can easily complete hammering operations even in the hardest materials such as concrete or brickwork.
But also accurate drilling and screwing work with precise force settings can be accomplished with the PRDS 10-20V with ease. Owing to the function selector switch and infinitely variable speed control with quick stop rundown brake, you can both carefully screw in or loosen screws and forcefully drill plug holes into hard stone.
Practice-optimized compact design with convenient equipment features
An SDS-plus chuck and the supplied bit adapter including a universal bit holder allow for fast, tool-free accessories exchange within a few seconds. Different drill bits are also already included in the standard scope of delivery, so you can get started with your PRDS 10-20V right away.
To extend the application possibilities of this cordless rotary hammer, an optional drill bit and chisel set as well as other drilling and screwing accessories of proven Trotec quality are also available.
Since there is not always sufficient light available in your work area, the PRDS 10-20V is equipped with a convenient integrated LED lamp. This way you can make sure that your workplace is always fully illuminated even at locations where there is not enough space for a work lamp.
Moreover, being an integral solution, the housing of the PRDS 10-20V is not only equipped with an additional second handle enabling safe two-hand operation, but also with slip-resistant soft grip inlays both in the main and additional handle, offering extra firm grip during operation.
Flexpower – the innovative multi-device battery system from Trotec
Even the standard scope of delivery of this power tool from Trotec already includes a powerful 20 V multi-device battery from the Trotec Flexpower portfolio with a high charging capacity of 2 Ah. You can check the current charging status via the three-stage battery level indication that is integrated in the battery housing and clearly visible at one glance.
This power pack that can be fully charged in about an hour not only enables device runtimes extended by up to 33 % – as compared to standard batteries with only 1.5 Ah – moreover, this Flexpower multi-device battery can also be flexibly combined with different Trotec tools, including i.a. the cordless rotary hammer PRDS 10‑20V, the cordless multi-function tool PMTS 10‑20V, the cordless portable circular saw PCSS 10‑20V, the cordless random orbital sander PESS 10-20V, the cordless work light PWLS 10‑20V, the cordless work LED light PWLS 15‑20V, the cordless drill driver PSCS 11‑20V, the cordless hammer drill PHDS 11‑20V, the cordless grass and shrub shears PGSS 10-20V, the Cordless compressor PCPS 11‑20V and air pump PCPS 12‑20V, the cordless pendulum action jigsaw PJSS 11‑20V, the cordless hand-held vacuum cleaner VC 10‑20V or the Cordless vacuum cleaner VC 15‑20V.
Thanks to Flexpower you can do without unnecessary batteries and chargers – and the search for a suitable battery has also come to an end. Simply change the device, not the battery. Flexpower puts a stop to the unnecessary amount of various exchangeable batteries; the combination option with an ever increasing number of tools allows you flexibility at all times so you can carry on your projects energetically!
Premium branded battery for constantly full power
By now, lithium-ion batteries are widely distributed, after all they come without memory effect and self-discharge. Plus these batteries can be disconnected from the charger and used right away without it affecting the battery’s lifetime. But “lithium ions” is a generic term used for batteries of various qualities and made of diverse electrode materials; including those with a perceptibly weakening performance once the battery charge decreases.
Lithium-ion batteries supplied by Trotec are high-quality premium branded NMC batteries with a high energy density and charging voltage lasting until the end without exceptions – guaranteed! Compared to conventional lithium-ion batteries the performance of our premium branded batteries does not decrease even as the discharge increases.
Consequently, you benefit from lasting maximum power even with an almost empty battery. During longer operation only the battery charge decreases, never their performance – that is the added value of Trotec’s premium branded batteries!
The key equipment features of the PRDS 10-20V at a glance
The PRDS 10-20V can be used for screwing, rotary drilling and hammer drilling
All rotary hammers in direct comparison:
To find the rotary hammer which exactly meets your requirements, please consult the concise overview of all rotary hammers from Trotec, which we’re providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Flexpower multi-device battery system – can be flexibly combined also with other cordless tools from Trotec
- Powerful 20 V lithium-ion battery without memory effect and self-discharge
- High-power screwing and drilling in wood and metal plus hammer drilling in masonry and concrete
- Pneumatic hammer mechanism with 1 joule of impact energy
- Quick tool change thanks to SDS-plus chuck
- Function selector switch for screwing, rotary drilling and hammer drilling
- Infinitely variable impact rate and speed control with quick-stop function
- Convenient clockwise/counter-clockwise rotation selection and start lock
- Integrated LED work lamp
- Quick charger: only 1 hour of charging required
- Three-stage battery level indication
- Soft grip rubber inlays in the housing for extra firm hold
All important features at a glance
The cordless rotary hammer PRDS 10‑20V is delivered in a carry case incl. three SDS drill bits (ø 6/8/10 x L 150 mm), three HSS drill bits (ø 5/6/8 mm with hexagon retainer), 4 bits, a universal bit holder and a bit adapter, a quick charger and a replaceable Flexpower multi-device battery (20 V, 2 Ah).
Brand quality plus cost-efficiency
So far, you basically only had two options when choosing a cordless rotary hammer: either good but expensive, or mainly cheap.
Trotec's PowerTools now offer a smart choice: good and cheap at the same time. For we do not only stand for measuring devices and air conditioners, but also for power tools of brand quality: professional Trotec solutions with an excellent value-for-money ratio!
standard equipment
optionally available
not available
Buy
/de_DE/4415000201/Akku-Bohrhammer-PRDS-10-20V-104633-1557499390.jpg)
Akku-Bohrhammer PRDS 10‑20V inkl. Akku und Ladegerät
You save: 50 %
99.99 €
49.99 €
incl. VAT
Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 4.415.000.201 | |
| Technical data | ||
| Number of speed levels | 1 | |
| Idle speed 1. Speed level | 0 - 900 | |
| Impact frequency combined 1. Speed level | 0 - 5.000 min-1 | |
| Impact energy [Joule] | 1 | |
| Maximum drilling diameter | ||
| Wood [mm] | 16 | |
| Metal [mm] | 8 | |
| Concrete / brickwork max. [mm] | 10 | |
| Sound values according to EN 60745 | ||
| Sound pressure level [dB(A)] | 82.38 | |
| Sound power level [dB] | 93.38 | |
| Uncertainty K [dB] | 3 | |
| Vibration information according to EN 60745 | ||
| Vibration emission value (ah) Hammer drilling in concrete (main handle) [m/s²] | 6.314 | |
| Uncertainty (K) Hammer drilling in concrete (main handle) [m/s²] | 1.5 | |
| Vibration emission value (ah) Hammer drilling in concrete (additional handle) [m/s²] | 4.58 | |
| Uncertainty (K) Hammer drilling in concrete (additional handle) [m/s²] | 1.5 | |
| Electrical values battery | ||
| Battery nominal voltage [V] | 20 | |
| Battery capacity [Ah] | 2 | |
| Capacity indication | 3-stage | |
| Battery type | Li-ion | |
| Charger | ||
| Mains connection | 230 - 240 V, 50 Hz | |
| Output voltage [V] | 21.5 | |
| Power input [W] | 65 | |
| Nominal current consumption [mA] | 2,400 | |
| Connection plug | CEE 7/16 | |
| Cable length [m] | 1.5 | |
| Protection class | II | |
| Dimensions | ||
| Length (packaging excluded) [mm] | 238 | |
| Width (packaging excluded) [mm] | 84 | |
| Height (packaging excluded) [mm] | 250 | |
| Weight | ||
| (packaging excluded) [kg] | 1.5 | |
| Equipment, features and functions | ||
|---|---|---|
| Functions and features | ||
| Infinitely variable speed control | ||
| Gear selector switch | ||
| Torque selection | ||
| Clockwise / counter-clockwise rotation | ||
| Function selector switch | ||
| Function selector switch with release button (safety lock) | ||
| Switch for the impact mechanism | ||
| Automatic SPINDLE LOCK | ||
| SDS-plus system tool holder | ||
| Tool-free exchange of accessories | ||
| Battery level indication | integrated in the battery | |
| SPINDLE LOCK button | ||
| Changeable battery | ||
| Pneumatic hammer mechanism | ||
| Venting slots | ||
| Slip-resistant soft grip | ||
| Vibration damping | ||
| Integrated LED work lamp | ||
| Integrated bit magazine | ||
| Belt clip | ||
| ON/OFF switch | ||
| Dust protection cap made of rubber fitted on the tool holder | ||
| Standard scope of delivery | ||
|---|---|---|
| Accessories scope of delivery | ||
| Number of bits | 4 x 50 mm | |
| Number of drills | 3 SDS drill bits 6/8/10 x 150 mm, 3 HSS drill bits 5/6/8 mm with hexagon retainer | |
| Number of batteries | 1 | |
| Bit adapter | ||
| Universal bit holder | ||
| Additional handle | ||
| Quick charger | ||
| Transport case | ||
standard equipment
optionally available
not available