LED work light PWLS 05-10
Cordless 10-watt LED work light with magnetic holder and for indoor and outdoor work activities.
Extra bright work light, indoors and outdoors
With its bright surface light (650 lm), the cordless LED work light PWLS 05-10 allows for an intense illumination and optimum visibility. Whether you use it for indoor or outdoor applications – the battery-powered, mobile spotlight (incl. 4 x 1.5 V AA) is extremely robust, can be folded compactly and in practice convinces by its direct operational readiness, a high performance level and flexibility.
The practical light source – for the use at home, in the hobby sector, for leisure activities and in the craft sector
For the LED work light PWLS 05-10 there are always numerous possible uses in the private household, in the DIY sector, in the craft sector or on construction sites. Whether you wish to use it for performing wallpapering and paint work, plastering in the shell, as a workshop light for automotive tasks or for outdoor work in the twilight – good craftmanship is only ensured by good lighting! The PWLS 05-10 also convinces as a camping light, breakdown light or for outdoor activities, for example to illuminate the tent, to search the equipment, or to find the way in the dark night.
Flexible alignment and fixing
Designed for rough environments, the splash-proof light with its protection type IP44 is provided with a shockproof edge protection. Convenient: The handle that can be adjusted by 180° in six positions also serves as a stable foot for the targeted illuminated of the working area. This versatility is supplemented by a strong magnetic holder – perfect for fixing the work light to metal surfaces.
Strong surface light in three brightness levels
With its power of 10 watts the work spotlight supplies daylight white light in the colour temperature of 6,000 K, with a burn time of approx. 3-9 hours (depending on the operating mode). The integrated COB flat-panel LED provides for an especially homogeneous and bright light radiation. Please see the information below regarding the preferences of COB-LED technology.
Mode 1 – maximum brightness: The light intensity of 650 lumen provides for optimum visibility conditions.
Mode 2 – reduced brightness: For glare-free light the brightness can be reduced to 195 lumen.
Mode 3 – strobe light: The flashlight which flares at intervals can be used as flashing warning light, as marker light or for scaring off wild animals.
Represents your work in the proper light
In addition to the suitable tool, two things are of utmost importance when you perform craftwork: good lighting and free hands – in particular in places that are difficult to access. Your private surroundings also hold dark moments now and again. Therefore: take precautions and fully rely on the immediately available light provided by the cordless PWLS 05-10.
For optimum results in the craft trade sector and on the construction site
Whether you use it while you're sawing, drilling, installing cables or doing plastering work – your work results will only be perfect if the lighting conditions are optimal. If the daylight is not sufficient, use the PWLS 05-10 to provide for extensive illumination of your work area.
A clear visibility for carrying out automotive work
When you're performing repair work on the car, the PWLS 05-10 serves as a comfortable floor lamp and enables free visibility to the vehicle underbody – without limiting the radius of movement by an annoying cord or without having to hold the lamp with one hand. For work that is carried out in the engine compartment we recommend using the magnetic holder integrated in the foot, for example to fasten the lamp on the open bonnet.
Invaluable help in the case of breakdowns
A flat tyre is really annoying! Still more annoying if the tyre has to be changed in the dark at night. Therefore play it safe and always carry the flatly foldable LED lamp along with you in your vehicle! In the event of an accident or a breakdown – with the PWLS 05-10 you have both on board: a reliable surface spotlight and a striking warning light. Tip: When you take the work light with you, put the cordless impact wrench PIWS 10-20V from Trotec into your car as well to make sure that the wheel nuts can be loosened and tightened with very little effort.
Practical light source in the event of a power failure and for recording the meter reading
Not only in older buildings the fuse boxes as well as the electricity, gas or water meters are often located in insufficiently lighted basements. In order to read out the meters in the context of regular recording, at times one has to pass dangerous trip hazards and poorly illuminated cellar steps. Also in the event of sudden power failures you safely avoid such hazard points by means of the hand lamp PWLS 05-10 and in this way prevent accidents in your everyday life.
Camping light, fishing light or party light for outdoor and leisure activities
Nature lovers use the PWLS 05-10 to bring a light into the dark night. Whether you're camping out in the open, during night fishing, at spontaneous beach parties, or if you go hunting or are out and about on a several-day trekking tour: the universally usable LED lamp reliably lightens up the darkness.
Uniform area light thanks to COB-LED technology
COB means "Chip-on-Board" and refers to a very homogeneously lit LED technology for lamps. In comparison to conventional LED lamps in the case of which individual light diodes can often be noticed with the naked eye, work lights with high-performance COB-LED lamps produce an even and full-surface light diffusion. The whole surface of the COB-LEDs is perceived as a uniformly bright area.
In addition to these optical benefits in the perception of the light modern COB-LEDs convince with a additionally increased energy efficiency compared to commercially available LEDs. COB-LEDs shine 20 times as bright as conventional bulbs and consuming the same amount of power.
Special equipment features of the LED work light PWLS 05-10
Perfect work-life balance: Mobile light for work and leisure time
A few practical benefits:
- Ready for use immediately thanks to 4 x 1.5 V AA batteries (included in the scope of delivery)
- Light-intense LED work light with shockproof edge protection
- High-performance COB-LEDs provide for uniform, extra bright light (650 lm)
- Flexible handle and foot, adjustable by 180° in 6 positions
- 3 lighting modes: high brightness, low brightness, strobe mode
Compelling value-for-money ratio
When choosing a work lights so far, basically you only had two options: either good but expensive, or mainly cheap.
Trotec's PowerTools now offer a smart choice: good and cheap at the same time. For we do not only stand for brand quality where measuring devices and air conditioners are concerned, but also when it comes to power tools: professional Trotec solutions with an excellent value-for-money ratio!
Trotec's work lights at a glance
All work lights in direct comparison:
To find the work light which exactly meets your requirements, please consult the concise overview of all work lights from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
|Power input Surface LED [W]||10|
|Luminous flux Surface LED [lm]||650|
|Burn time Surface LED||High brightness level: 3-4 h
Low brightness level: 9-10h
|Functions and features|
|Flexible suspension hook|
|Wrist strap attachment|
|Battery level indication||Not available|
|Length (packaging excluded) [mm]||40|
|Width (packaging excluded) [mm]||160|
|Height (packaging excluded) [mm]||125|
|(packaging excluded) [kg]||0.37|
|Standard scope of delivery|
|Accessories scope of delivery|