Trotec's rotary hammer PRDS 11-230V
  1. Products & Services
  2. Powertools
  3. Rotary hammers
  4. PRDS 11-230V

Rotary hammer PRDS 11-230V

Powerful chiselling, hammer drilling and rotary drilling at a value-for-money ratio that will hit you like a hammer

Powerful hammering in concrete or brickwork, chiselling as well as drilling with an extremely high capacity of 1,600 W

As a professional rotary hammer of the 6 kg class the PRDS 11-230V with an impact energy of 6 joules possesses enormous power reserves and due to the robust aluminium gearhead and the pneumatic hammer mechanism it provides the perfect solution for continuous high-performance operations during renovation, installation, construction and chiselling work.

With the PRDS 11-230V you will never lack the knack: You want to chip off old tiles, chisel out the chasing for cables, produce small wall openings or perform demolition work? Insert chisel, activate rotation stop and let it rip.

Now proceed with hammer drill holes in concrete or granite? Simply change the tool – easily done with one hand only due to the SDS-plus chuck – and activate the additional drilling function at the rotary switch. With great frequency the pneumatic hammer mechanism of the PRDS 11-230V produces individual strokes with an impact energy of 6 joules and so makes it easier to drill through even the hardest of materials regardless of the contact pressure. Moreover, for drilling into wood and metal the hammer function of the PRDS 11-230V can also be deactivated completely.

One device – four functions: The PRDS 11‑230V can be used flexibly for chiselling, changing the chisel position, hammer drilling and rotary drilling.

The supplied depth stop is a practical accessory for all drilling operations. It not only permits the compliance with specified drilling depths or allows several holes of identical depth, it also helps pros save money: If, for instance, 500 dowel holes are each drilled in by 6 mm more than necessary, this adds up to 3 metres of unnecessary bit wear and the corresponding early need for replacement.

An optional drill bit and chisel set of proven Trotec quality is available to extend the application possibilities of the rotary hammer PRDS 11-230V.



4 functions: chiselling, changing the chisel position, hammer drilling and rotary drilling

A fine ergonomic design may be stirring your soul, but never your hand

In an agreeably ergonomic manner, this rotary hammer demonstrates that manageability and high performance must not be mutually exclusive. Its special L-shaped design with the vibration-damped main handle ensures that the centre of gravity of the PRDS 11-230V is perfectly balanced. The additional handle is further adjustable by 360° for optimum handling at any time – even in confined workspaces.

Combined with the infinitely variable impact rate and speed control of this rotary hammer you can adjust the required power of the PRDS 11-230V to each task and material. As a result the possible applications range from spudding sensitive tiles to the rapid large-scale chiselling with fast work progress. Rotary hammers

During core drilling – e.g. for sanitary or electrical installations – you can also benefit from the performance advantages of this rotary hammer, for the extremely powerful impact mechanism ensures maximum advancing for efficient results – especially with large-diameter drill bits.

When the function selector switch is set to the centre position, the chisel can easily be rotated by up to 360° by pressing the on/off switch.


The key equipment features of the PRDS 11-230V at a glance

Pneumatic hammer mechanism
Pneumatic hammer mechanism with high-compression piston for max. impact power
Additional key-type drill chuck
Additional key-type drill chuck for straight-shank drill bits.
Metal depth stop
Metal depth stop for limiting the drilling depth.
Adjustable additional handle
Additional handle rotatable by 360° and lockable.
Vibration damping
Vibration-damped main handle reduces vibrations.
6 joules of impact energy
6 joules of impact energy at the push of a button
Impact rate and speed control infinitely variable
Infinitely variable impact rate and speed control.
Switch for the impact mechanism
Separate switch for activating the pneumatic impact mechanism.

The PRDS 11-230V can be used for chiselling, hammer drilling and rotary drilling

Hammer drilling
Compared to an impact drill, the lower stroke rate and higher impact force make the rotary hammer particularly well suited for use in concrete, stone and brickwork.
Chiselling, chasing and chipping
A quick progress even in case of extensive chiselling work is ensured by the powerful blows of the pneumatic hammer mechanism of the 1,600 W PRDS 11-230V – each with an impact energy of 6 joules.
Rotary drilling
A key-type drill chuck with SDS shank and chuck key is already included in the scope of delivery of this rotary hammer. That way you can also use already available straight-shank drill bits for the rotary drilling operation of the PRDS 11-230V.
Convenient depth stop
The supplied depth stop permits precisely reproducible drilling depths when making several holes of the same type and it prevents you from exceeding specified drilling depths as with dowel holes.
Technical data by comparison

All rotary hammers in direct comparison:

To find the rotary hammer which exactly meets your requirements, please consult the concise overview of all rotary hammers from Trotec, which we’re providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Powerful hammering in concrete or brickwork, chiselling as well as drilling with an extremely high capacity of 1,600 W
  • Pneumatic hammer mechanism with an impact energy of 6 joules – maximum impact power in hard materials regardless of the contact pressure
  • Ergonomic L-shaped design with a perfectly positioned centre of gravity
  • Vibration-damped main handle and infinitely adjustable additional handle for optimum handling
  • Quick tool change thanks to SDS-plus chuck
  • Function selector switch with safety lock
  • Rotation stop function for chiselling and hammer stop for drilling in metal and wood
  • Infinitely variable impact rate and speed control for material-compatible working
  • The chisel position can conveniently be adjusted by 360°.
  • Incl. key-type drill chuck with SDS shank to use straight-shank drill bits
  • TÜV-tested quality

All important features at a glance

Powerful 1,600 W motor
Idle speed 0 to 800 rpm
Impact frequency 0 to 4,000 min-1
6 joules of impact energy
Impact drilling function
Infinitely variable speed
SDS-plus chuck
Drill bit exchange without the need for tools
Vibration-damped main handle
Incl. depth stop
Infinitely adjustable additional handle
Designed for chiselling, rotary drilling and hammer drilling
Delivered in a carry case
Scope of delivery rotary hammer PRDS 11-230V

The rotary hammer PRDS 11‑230V is supplied as complete package incl. key-type drill chuck with SDS-plus shank, SDS pointed chisel 14 x 250 mm, SDS flat chisel 14 x 250 mm, three SDS drill bits 8/10/12 x 150 mm, drill chuck key, metal depth stop, dust protection cap, lubricant container and transport case.


Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority TÜV Rheinland certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user. Naturally, not only the cordless rotary hammer but also the charger was tested for safety and certified accordingly.

Brand quality plus cost-efficiency

So far, you basically only had two options when choosing a cordless rotary hammer: either good but expensive, or mainly cheap.

Trotec's PowerTools now offer a smart choice: good and cheap at the same time. For we do not only stand for measuring devices and air conditioners, but also for power tools of brand quality: professional Trotec solutions with an excellent value-for-money ratio!

Tested for safety, TÜV SÜD

Buy

Technical data

Technical data
General information
  Article number 4.415.000.102
Technical data
  Number of speed levels 1
  Idle speed 1. Speed level 0 - 800 min-1
  Impact frequency combined 1. Speed level 0 - 4.000 min-1
  Impact energy [Joule] 6
  Tool holder SDS-plus
  Max. chucking range [mm] 13
Maximum drilling diameter
  Wood [mm] 40
  Metal [mm] 13
  Masonry / bricks [mm] 32
Electrical values
  Mains connection 230 V/50 Hz
  Power input [W] 1,600
  Cable length [m] 3
  Protection class II
Sound values according to EN 60745
  Sound pressure level hammer drilling [[dB(A)]] 93.5
  Sound power level hammer drilling [[dB(A)]] 104.5
  Uncertainty (K) [dB] 3
Vibration information according to EN 60745
  Vibration emission value for hammer drilling in concrete (ah) [m/s2] 15.037
  Uncertainty hammer drilling in concrete (K) [m/s2] 1.5
  Vibration emission value for chiselling (ah) [m/s2] 14.868
  Uncertainty chiselling (K) [m/s2] 1.5
Dimensions
  Length (packaging excluded) [mm] 95
  Width (packaging excluded) [mm] 390
  Height (packaging excluded) [mm] 250
Weight
  (packaging excluded) [kg] 6
Equipment, features and functions
Functions and features
  Infinitely variable speed control
  Function selector switch with release button (safety lock)
  Switch for the impact mechanism
  Functions Drilling, Impact drilling, Chiselling, Chisel position adjustable by up to 360°
  Venting slots
  SDS-plus system tool holder
  Tool-free exchange of accessories
  Pneumatic hammer mechanism
  Vibration damping
  Integrated LED work lamp
  Softgrip
Standard scope of delivery
Accessories scope of delivery
  SDS flat chisel 14x250 mm
  SDS pointed chisel 14x250 mm
  3 SDS drill bits 8/10/12x150 mm
  Drill chuck key
  Additional handle
  Additional handle (can be rotated by 360°)
  Depth stop
  Lubricant container
  Dust protection cap
  Transport case

 standard equipment

 optionally available

 not available

Accessories

Loading...

Downloads

Loading...