Industrial condenser dryer DH 15
The perfect solution for commercial dry keeping applications and ideally suited for rooms open to the public or with staff coming and going
Easily outdries the competition with their back to the wall
Characterizing features of the DH 15 include not only its distinctive German industrial design, stylish, minimalist, for maximum solidity, but also a high dehumidification performance even to low temperature ranges, technically brought to perfection for continuous operation with minimum maintenance effort.
A professional industrial dehumidifier to the core, originally produced by Trotec, having been developed and manufactured according to the highest of quality standards in Germany.
The DH 15 is a cost-effective solution for fully automatic humidity control in small and unheated business rooms by means of hygrostat control. It further impresses with its extremely stable design and a professional hot gas automatic defrost system enabling the DH 15's operation to temperatures of approximately 0 °C.
Low in maintenance, yet highly effective – ideal for continuous operation
Consistently designed with a close focus on preserving values, this corrosion-protected construction made of powder-coated, galvanized sheet steel accommodates an industrial condenser dryer of maximum durability. Combined with its heat exchanger block that comes provided with protective coating it renders the professional dehumidifier DH 15 particularly resistant to environmental influences.
The combination of high efficiency level and low-maintenance design predestines the DH 15 for fully automatic, hygrostat-controlled permanent drying applications in numerous fields of application. Due to the autonomous recirculation operation the device can even be subsequently integrated in virtually any working environment.
An effective procedure for maximum profitability
The DH 15 automatically regulates the humidity to an ideal level at which corrosion, condensation and mould stand no chance. In recirculation operation this industrial dryer withdraws the major part of the humidity from the air in keeping with the target humidity level preselected via the hygrostat. A high level of efficiency is ensured by the smoothly running AC axial fan and the high-performance compression refrigeration system of the DH 15.
The dry air supplied to the room is simultaneously heated by the process with the result that the input of conventional heat and ventilation energy can be reduced.
In addition, the DH 15 comes equipped with an automatic hot gas defrost system operating based on the bypass procedure. To make sure the evaporator is protected from frost and kept clear of ice, a special solenoid valve opens briefly and redirects the hot refrigerant from the compressor directly to the evaporator (instead of to the condenser) via a bypass.
For this reason, the DH 15 requires only very short defrost phases – ideal for an effective dehumidification in low-temperature surroundings such as unheated rooms. Furthermore, it improves the performance level and thus increases the net overall equipment effectiveness of this dehumidifier.
Diverse application possibilities
Unless effectively controlled, humidity can lead to manifold problems for production processes, furniture and equipment or stored goods. An ideal humidity regulation does not just prevent rust, rot, material decomposition or a reduced quality in processing and storing goods, its also a reliable protection against mould growth. When mounted to the wall the DH 15 can be used for very different fields of application including:
- Humidity regulation in staff rooms, changing rooms, recreation and break rooms
- Dry keeping of changing rooms, fitness studios and store rooms for biker gear or skiing equipment
- Constant humidity levels in car pools, workshops, on test stands or in production halls
- Dehumidification in archives, libraries or for your collections
- Dehumidification of water processing facilities and pump stations to prevent condensate formation on pipes and pumps
- Humidity regulation when storing natural products, for the quality assurance in timber yards or when storing raw tobacco
- Preventing corrosion in electric control centres, boiler plants, turbines and pipe systems in power plants or when storing car body shells and metal components
- Humidity regulation in computer centres, control rooms etc. Humidity regulation in the food industry, e.g. in cheese dairies or for the production of confectionery
The DH 15 exclusively houses high-quality components that are particularly well-matched to work together, all guaranteeing durability and a long lifetime.
The high-performance refrigerant compression system of the DH 15 is provided with an efficient protective coating ensuring a high resistance to corrosion and environmental influences.
The air flow rate of the axial fan, designed for a long lifetime, driven by a robust AC motor and equipped with solid metal blades for continuous low-maintenance operations, is optimally geared to the dehumidification capacity of this heat exchanger block.
Owing to the horizontally conducted recirculation air flow and its compact design the ready-for-use DH 15 is particularly well suited for the assembly above doors.
The operating elements of this industrial dryer are tamper-proof and protected against unauthorized access, which makes it also an ideal dehumidifier for public buildings, changing and staff rooms or museums.
The sophisticated complete equipment of the DH 15 renders additional equipment options virtually obsolete. However, should you want to discharge the accumulating condensate to an elevated area, the device can also be supplied with an integrated condensate pump as order option. Furthermore, a kit for rear panel installation is available upon request.
Make use of our best practice industrial services
Since every industrial undertaking has characteristic process flows, installations and facilities, every air treatment solution demands case-specific device configurations. All in all, the combined effects of air currents, humidity conditions and temperature fluctuations are often hard to calculate on a purely theoretical basis, e.g. in airlock areas or on conveying paths. The consequence: Unnecessary additional costs due to an overestimated demand or – even worse – solutions not working sufficiently in real life.
You can count on our experts
In order to precisely calculate the demand in the industry and to develop tailor-made concepts for climate conditioning experienced climate specialists are needed. Rely on our team of experts as well as the industrial services: We analyse the individual requirement situation with you present on site, determine the specific demand for devices and develop a tailor-made project solution right up to the exact positioning of the devices.
Before the planned stationary units are installed, our service team first works with mobile versions of the drying units as part of a trial run. These can be put up without any difficulty or the need for structural changes.
During this validation phase we document all relevant climate parameters such as air temperature, relative humidity, dew point or flow rate for a final optimization of the requirement calculation.
Trotec is the only provider of this advantage:
Thanks to the unique option of non-binding trial operation you will invest solely in solutions which have verifiably proven their worth in everyday operation meeting your individual on-site requirements. The stationary units will not be ordered until you are fully satisfied with our concept. The only costs incurred consist of an inexpensive hiring flat rate for the time of test operation.
Just give us a call at +49 2452 963-777 – our industry consultants will be pleased to help you personally and provide information regarding our best practice industrial services. Or send a request indicating your personal requirements directly to our industry experts. We will answer promptly!
All industrial dryers of the DH series by direct comparison:
To find the condensation dehumidifier which exactly meets your requirements, please consult the concise overview of all devices of Trotec's DH series, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Professional quality “made in Germany” – originally produced by Trotec
- High dehumidification performance even at low temperatures
- Corrosion-protected design
- Fully automatic operation
- Professional hot gas automatic defrosting
Hohe Luftfeuchtigkeit in Produktionshallen kann teuer werden: Kondensatbildung, Korrosionsschäden sind oft die Folge. Mit einer Entfeuchtungsleistung von 22 Litern pro Tag schützt der DH 15 effektiv vor diesen Problemen. Auch zur nachträglichen Installation die perfekte Lösung
1,779.05 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen
|At 20 °C / 60 % RH [l/24h]||11|
|At 30 °C / 80 % RH [l/24h]||22|
|Air flow rate|
|Level Max. [m³/h]||225|
|Min. temperature [°C]||0|
|Max. temperature [°C]||40|
|Min. humidity [% RH]||30|
|Max. humidity [% RH]||90|
|Mains connection||230 V/50 Hz|
|Nominal current consumption [A]||3.8|
|Power input [kW]||0.43|
|Required current starting phase [A]||18|
|Recommended fusing [A]||10|
|Connection plug||CEE 7/7|
|Coefficient of performance (COP)||1.6|
|Max. heat emission to water [kW]|
|Amount of refrigerant [g]||340|
|CO2 equivalent [t]||0.603|
|Pressure suction side [MPa]||0.7|
|Pressure outlet side [MPa]||2.7|
|Distance 3 m [dB(A)]||49|
|Length (packaging excluded) [mm]||365|
|Width (packaging excluded) [mm]||840|
|Height (packaging excluded) [mm]||330|
|(packaging excluded) [kg]||37.1|
|Equipment, features and functions|
|Automatic defrost system|
|Hose connection possible|
|Hose included in the scope of delivery|
|Recommended hose size [mm]||10|
|Rubber-tyred metal wheels|