![Infrared thermohygrometer T260 Infrared thermohygrometer T260](images/infrared-thermohygrometer-t260-cf1e.jpg)
Infrared thermohygrometer T260
Precision climate measuring device with outstanding measurement accuracy, integrated pyrometer and dew point alarm function
![T260 T260](images/t260-d2fb.jpg)
![T260 T260](images/t260-d5fb.jpg)
Whether measuring air and dew point temperature or determining the relative, absolute and specific humidity – the T260 offers all advantages and measurement options of the T210, yet enhances its thermohygrometer function by an integrated laser pyrometer incl. dew point alarm signal generator – all in only one device.
Thus, you can not only flexibly apply the T260 for surface temperature measurements with marking of the measuring site, but thanks to the dew point alarm function it is also possible to quickly and easily locate potential drops below dew point on material surfaces and and positions where mould can form or insulation is poor.
Handy: The integrated dew point alarm function of the T260
During IR measurement the T260 simultaneously indicates the surface temperature of the measuring object and the dew point temperature within the measurement environment.
As soon as the surface temperature falls below the dew point temperature, the T260 notifies you by means of a visual signal and an additional acoustic alarm. The alarm thresholds can be configured individually.
Owing to the alarm function, wall areas can be examined in next to no time and weak points can quickly be detected, for using the T260 you can measure all required measured variables – room temperature, humidity, surface temperature, dew point – with only one measuring device!
Saving, analysing and evaluating measured values
With an active USB connection to the measuring device the MultiMeasure Studio software included in the scope of delivery also allows for online logging of measured values incl. analysis function.
Finally one software for basically all measuring devices
As optionally available Professional version MultiMeasure Studio is not only perfectly suitable for fully compatible devices like the T260.
Owners of partially compatible or isolated measuring instruments can also benefit from this software, since it enables the analysis and administration of all measuring projects and customer data across multiple devices in a single application!
Using the unique report generating function you can create professional measurement reports in a trice:
Numerous boilerplate texts for building diagnostics, moisture measurement, leak detection and thermography are already included completely formulated (German version only).
Interested? Here you can access all information on the Professional version...
VARIOUS DIAGNOSTIC OPTIONS
![](images/t260-ps-06-d459.jpg)
Climate measurement
The T260 measures the air temperature and the relative humidity. As an alternative, the dew point, absolute humidity in g/m³ or the mass ratio in g/kg is displayed.
Dew point alarm
By means of the integrated infrared sensor, the surface temperature of the wall is measured and compared with the dew point temperature. Now just direct the infrared sensor to the wall surface. In this way you can even scan larger surfaces effectively.
If the surface temperature of the wall is near or even below the dew point, an alarm signal is emitted. Additionally, the laser pointer indicates by flashing that the value is falling below the dew point and in this way shows you the wall surface affected. Please take into account that the increasing measuring distance also increases the measuring spot size of the infrared sensor on the wall. At a distance of 1 m, the measuring spot has a diameter of approx. 10 cm. At a distance of 2 m, the measuring spot diameter is approx. 20 cm. The on-demand laser aiming aid always indicates the measuring spot centre.
![Compensation moisture measurement Compensation moisture measurement](images/compensation-moisture-measurement-4392.jpg)
Compensation moisture measurement
By climate measurements in drill holes or hollow spaces it is also possible to determine the moisture content of building materials. If the actual moisture content corresponds to the value of the sorption isotherms, the building material is in a state of balance from a structural-physical point of view. If the moisture content is above this value, this indicates that there is building moisture.
All climate measuring devices in direct comparison:
To find the climate measuring device which exactly meets your requirements, please consult the concise overview of all climate measuring devices from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits
- Measuring device designed and produced according to the highest quality standards in Germany
- German industrial design in robust, premium two-component construction with IP54 type of protection
- Continuous easy-to-clean glass surface made of highly scratch-resistant Blanview special glass for a high-contrast display of measured values even in the sunlight
- Capacitive touchscreen control panel
- High-resolution colour display for simultaneous indication of two measured values
- Pyrometer function for precise surface temperature measurement
- Dew point alarm function
- Precise measurement of air temperature and humidity – site height or pressure can be configured
- Integrated calibration function (user offset) enables long-term usage without quality losses in terms of measurement accuracy
- Measured value storage via USB with active software connection
- Incl. MultiMeasure Studio measurement data management software (standard download version)
Certified safety - factory calibration of measuring devices directly from the manufacturer
As one of the leading full-range suppliers of measuring equipment for building diagnostics and environmental technology, Trotec offers you the opportunity to have all measuring devices calibrated, maintained and repaired from a single source. With a calibrated measuring device, you avoid inaccurate measurement results and can reliably protect yourself against possible recourse claims. So play it safe and use our calibration service for your Trotec measuring devices: In our in-house laboratory, we calibrate according to the factory standard to firmly defined measuring ranges and points. Optionally, the calibration points can also be individually defined within the specified calibration range.
standard equipment
optionally available
not available
Shop
![T260 Infrarot-Thermohygrometer show in Trotec online shop](https://cdn.trotec.com/fit-in/1000x1000/filters:format(jpg)/de_DE/3510207250/T260-Infrarot-Thermohygrometer-102877-1554466176.jpg)
T260 Infrarot-Thermohygrometer Sold out
359.00 € incl. VAT Show net price (VAT not included)
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 3.510.207.250 | |
Air temperature [°C] | ||
Min. measuring range | Air temperature [°C] | -20 | |
Max. measuring range | Air temperature [°C] | 50 | |
Resolution [°C] | 0.1 | |
Accuracy ± | Air temperature [°C] | 0.4 | |
Air temperature [°F] | ||
Min. measuring range | Air temperature [°F] | -4 | |
Max. measuring range | Air temperature [°F] | 122 | |
Resolution [°F] | 0.1 | |
Accuracy ± | Air temperature [°F] | 0.7 | |
Relative humidity (%) | ||
Min. measuring range | Relative humidity [%] | 0 | |
Max. measuring range | Relative humidity [%] | 100 | |
Resolution | Relative humidity [%] | 0.1 | |
Accuracy ± [% r.F.] | 2 | |
Dew point temperature [°C] | ||
Min. measuring range | Dew point temperature [°C] | -20 | |
Max. measuring range | Dew point temperature [°C] | 50 | |
Resolution [°C] | 0.1 | |
Accuracy ± | Dew point temperature [°C] | 0.4 | |
Dew point temperature [°F] | ||
Min. measuring range | Dew point temperature [°F] | -4 | |
Max. measuring range | Dew point temperature [°F] | 122 | |
Resolution [°F] | 0.1 | |
Accuracy ± | Dew point temperature [°F] | 0.7 | |
Surface temperature [°C] | ||
Min. measuring range | Surface temperature [°C] | -70 | |
Max. measuring range | Surface temperature [°C] | 380 | |
Resolution [°C] | 0.1 | |
Accuracy ± | Surface temperature [°C] | 2 | |
Measuring optic (geometric resolution) | Surface temperature [°C] | 8.1 | |
Measuring principle [°C] | Surface temperature | Thermopile | |
Surface temperature [°F] | ||
Min. measuring range | Surface temperature [°F] | -4 | |
Max. measuring range | Surface temperature [°F] | 140 | |
Resolution [°F] | 0.1 | |
Accuracy ± | Surface temperature [°F] | 3 | |
Display | ||
LCD | ||
Interfaces | ||
USB | ||
Device control | ||
Touch buttons | ||
Housing design | ||
Plastics | ||
Power supply | ||
Internal (battery) | 4 x 1.5 V, AA | |
Ambient conditions | ||
Operation - min. temperature [°C] | 0 | |
Operation - max. temperature [°C] | 50 | |
Operation approx. - max. relative humidity (non-condensing) [%] | 95 | |
Storage - min. temperature [°C] | -30 | |
Storage - max. temperature [°C] | 60 | |
Storage - max. relative humidity (non-condensing) [%] | 95 | |
Dimensions | ||
Length (packaging excluded) [mm] | 202 | |
Width (packaging excluded) [mm] | 63 | |
Height (packaging excluded) [mm] | 35 | |
Weight | ||
(packaging excluded) [kg] | 0.295 |
Standard scope of delivery | ||
---|---|---|
Standard scope of delivery | ||
Measuring device | ||
Battery(-ies) | ||
Factory test certificate | ||
Operating manual | ||
Storage case |
Ascertainable measured values and functions | ||
---|---|---|
Internal sensors | ||
Relative humidity [%] | ||
Air temperature [°C] | ||
Air temperature [°F] | ||
Dew point temperature [°C] | ||
Dew point temperature [°F] | ||
Surface temperature [°C] | ||
Surface temperature [°F] | ||
Absolute humidity content [g/m³] | ||
Functions and features | ||
Maximum value display | ||
Minimum value display | ||
Measured value hold function | ||
Average value display | ||
Display illumination | ||
Acoustic alarm function | ||
Visual alarm function | ||
Automatic switch-off | ||
°C/°F switching | ||
Calibration option | ||
Menu function cal 1 | ||
Menu function cal 2 | ||
Menu function TH | ||
Menu function IR | ||
Menu function DP | ||
Menu function CFG |
standard equipment
optionally available
not available