Individually configurable for any application
  1. Products & Services
  2. Machines - HighPerformance
  3. Dehumidification
  4. Desiccant dehumidifiers, stationary
  5. Equipment options

Manifold equipment variants for the TTR industrial desiccant dehumidifiers

Individually configurable for any application

As standard, all TTR units are equipped with numerous functions and features guaranteeing a reliable operation, easy handling and long lifetime with low maintenance effort. Moreover, manifold equipment options are available which enable you to adjust your TTR unit individually depending on your specific application requirements:

  1. PLC control module Millenium
    Microprocessor control with four-line plain text display for status or fault messages. Enables precise energy management as well as humidity and temperature control of the dry air (sensors optional).
  2. Flowmatic S
    Records and compensates sensor-supported automatic pressure losses and maintains a constant pressure / volume flow complying with the setpoint selection. Two fixed nominal values can be stored for this purpose. Starting with the TTR 2000, the volume flow and pressure regulation can be freely adjusted via the control signal (0 … 10 V).
  3. Moisture control
    Extension modules for Millenium (1) for the signal conversion of connected humidity sensors including controller programming.
  4. Temperature control
    Extension modules for Millenium (1) for the signal conversion of connected temperature sensors including controller programming.
  5. Dew point sensor
    Together with the Millenium control (1) and the humidity control unit (3) it allows to control the dry air depending on the dew point. Dew point +20 °C ... -80 °C, 4 - 20 mA.
  6. Pt100 temperature sensor
    With transmitter 4 - 20 mA. Combined with recooler/reheater (14), Millenium control (1) and temperature control unit (4) this sensor permits the regulation of the dry air temperature.
  7. Touchscreen
    Enables a convenient control of the entire unit via touchscreen instead of manual control.
  8. GSM remote connection
    Enables the control of the TTR industrial desiccant dehumidifiers via GSM.
  9. WLAN remote connection
    Enables the control of the TTR industrial desiccant dehumidifiers via WLAN.
Manifold equipment variants for the TTR industrial desiccant dehumidifiers
  1. Heat exchanger module
    Integrated module for cooling or heating dry air by means of cold or hot water available on site; requires an indication of the media's temperature.
  2. Heat exchanger module stainless steel
    As item 10, but in stainless steel version.
  3. Steam heater
    For heating the regeneration air by means of saturated vapour.
  4. Gas heater
    For heating the regeneration air by means of a gas burner.
  5. Electric reheater
    For heating the dry air additionally.
  6. Hygrostat control
    External hygrostat HG 120 for humidity-dependent control of the TTR industrial desiccant dehumidifiers, optionally with or without permanent ventilation. A 4-pin coupling is required for connecting the HG 120 (16).
  7. 4-pin connector coupling for HG 120
    With cable and cable inlet for the connection to the terminal.
  1. Hygrostat control, electronic
    The electronic hygrostat HG 125 is also available. It can be used starting at a temperature of -30 °C and is also suited for continuous control if combined with the Millenium control (1).
  2. 7-pin connector coupling for HG 125
    With cable and cable inlet for the connection to the terminal.
  3. Wheels (4 swivel castors with brakes)
  4. Weather protection equipment
    Weather protection grids at air inlets, additional seals, exhaust pipe arc for humid air, Plexiglas flap protecting the operating elements.
  5. Protection and transport frame, without castors
  6. Castors for transport frame (21)
  7. Transport frame, stackable, with castors
  8. TTR filter box 610
    For HEPA filtering of process air or dry air. Can be combined with all TTR industrial desiccant dehumidifiers. Max. air flow rate 4,000 m³/h per filter box. More information regarding the TTR filter box can be found here.
  9. Hose adapter
    Faceplate with 2 x ø 500 mm connectors (A) from TTR 10000 upwards. Can be screwed to the dry air blow-out and process air suction side above the standard grid (B).
Hose adapter


Upon request, we also produce customized desiccant dehumidifiers as special models

Upon request, we will readily produce tailor-made desiccant dehumidifiers as special models “made in Germany” perfectly geared to your needs, e.g.:

  • TTR industrial desiccant dehumidifiers with hygienic design
  • TTR industrial desiccant dehumidifiers for PWIS-free dry air
  • TTR industrial desiccant dehumidifiers with extremely low dew point

Makes use of the possibility of having special models with tailored components for your individual needs planned, designed and manufactured in close consultation with our specialists.
Click here to find out more ...