Ceramic fan heater TFC 16 E
Home Comfort

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Machinery - HomeComfort
  3. Heating
  4. Ceramic fan heaters of the TFC series
  5. Ceramic fan heater TFC 16 E

Ceramic fan heater TFC 16 E

The quick heating solution for feel-good temperatures: an all-round clean affair

Every now and again we just cannot avoid it: a cold summer. Even at midsummer it can be disagreeably chilly. The living spaces cool down and along with the temperature our own well-being, too, hits rock bottom. Even the heat produced by a central heating system running throughout the winter is not always sufficient. In such cases we long for a reliable heat source providing the right cuddly atmosphere to make us feel good in living or bedrooms. Lucky is the person who has made according provisions in form of an economical ceramic fan heater of the TFC series.

The compact ceramic heater TFC 16 E is ideally suited for use as temporary additional heating solution for the occasional unforeseen cold spell and the time between seasons. Once the outside temperatures drop permanently, the pleasantly quiet rapid heater radiates agreeable, constant heat for additional comfort in your home.

Otherwise unheated areas such as the conservatory or summerhouse can also be brought to the correct temperature with lightning speed using this ceramic heater. Two heating levels (1,200 W / 2,000 W) and a steplessly adjustable thermostat permit the automatic regulation of the room temperature. Quickly and directly.

Once the desired temperature has been reached, the heating device switches off automatically – for as long as the thermostat detects a temperature below the target value. Once that changes, heating will resume.

In ventilation mode, i.e. with deactivated heating function, the all-rounder supplies a fresh breeze and achieves an agreeable cooling effect on your skin. Switching over from ventilation to heating operation can be accomplished by nothing more than a quick turn of your hand at the top of the device.

Zero-emission warmth

Clean, odour-free and especially recommended for allergy sufferers

No dust particles or animal hair will be burnt at the surface of the ceramic heating elements, consequently no unpleasant odours – as one may know from other heaters with heating wires – are created. The air remains clean thus protecting the sensitive respiratory tracts of allergy sufferers or small children.

A few practical benefits:

  • Quick and agreeable warmth
  • Silent and compact ceramic fan heater
  • PTC ceramic heating element
  • 2 heating levels (1,200 W / 2,000 W)
  • Suitable for rooms sized up to 24 m² / 60 m³
  • Fan operation also possible without heating function 
  • Steplessly adjustable thermostat
  • Overheating protection 
  • Tilt protection switch integrated in the device base
  • Suitable for allergy sufferers
  • Operation indicator light
  • Easy transport and operation
  • Secure footing
  • Energy-efficient
Tested for safety

Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority Intertek certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.

State-of-the-art safety measures

Twice as safe and reliable application in households with children and animals

The modern PTC ceramic heating of the TFC 16 E guarantees a long-lived, energy-efficient operation without burnt heating wires and consequent malfunctions. The tilt protection integrated in the device base meets highest safety standards and makes sure the ceramic heater is switched off immediately should it be tipped over inadvertently. The same holds true for the overheating protection automatically switching the device off before any harm can be done.

Mobile heat generation to make you feel good on the go

One fan heater for all rooms

The light and compact rapid heater TFC 16 E can be used instantly. Just plug in the power cable, switch the device on and you're done! The room will soon be filled with agreeable warmth. Thanks to its integrated carrying handle you can also easily carry the fan heater to the next room with you.

The ceramic fan heater TFC 16 E impresses with practice-oriented details:

Easy to handle: The TFC 16 E comes with an adjustable thermostat and 2 heating levels (1,200 W / 2,000 W) as well as with a fan stage without heating function.
TFC 16 E – control panel
The convenient carrying handle permits an easy transportation of the fan heater TFC 16 E to any desired operating site.
TFC 16 E – convenient carrying handle
Extra safety: To be on the safe side, the TFC 16 E will switch off automatically if knocked over accidentally.
TFC 16 E – automatic switch-off
Don’t worry – the PTC ceramic heating of the TFC 16 E burns neither dust nor animal hair leaving no unpleasant odours.
TFC 16 E – suitable for allergy sufferers

Faster air heating – more agreeable feel-good climate

Faster and more even heat with ceramic fan heaters

Compared to the conventional heating coil technology (B) the shorter heat-up times are not the only distinguishing feature of Trotec fan heaters with PTC ceramic heating elements (A). There are also substantial process-related differences in the response behaviour of the heating elements.

Although both devices maintain the preselected target temperature (orange) in a similar manner by means of thermostat control, the respective temperature adaptation takes place at a significantly reduced speed and with greater deviations from the desired target temperature in case of devices with heating wires. The reason for this is the different conductivity behaviour of the heating elements: if current flows through the heating coils or wires, they will always retain the same temperature once they have heated up. For controlling the desired room temperature, the power supply is first interrupted, causing the coil/wire to cool down, and then re-activated by the thermostat so that the coil/wire heats up again completely before it is switched back off upon reaching the set target temperature.

This "on/off process" causes greater temperature fluctuations than with ceramic heating elements, for the material of the latter provides an integrated temperature self-regulation. The hotter PTCs get, the higher is their electrical resistivity, resulting in less current flowing through the heating element and in a reduced heating capacity, and thus in significantly lower temperature fluctuations and less switch-on and switch-off processes in thermostat-controlled operation. For this reason, ceramic fan heaters are able to create more even room temperatures for a pleasant indoor climate.

Cosy warmth wherever it is needed ...

Applied in conservatories the ceramic fan heater TFC 16 E constitutes a welcome and quickly set up heat source.
TFC 16 E – used in the conservatory or holiday home
Should you be caught off guard by the cold one day, the ceramic heater TFC 16 E quickly brings cosy warmth into your living and bedrooms.
When the permanent heating of workshops and summerhouses is just plain uneconomical, the electric heater TFC 16 E fills the gap and provides immediate heat wherever needed.
In the wintertime ceramic heaters can create the perfect haven of warmth and comfort. When it seems impossible for your home to be heated enough to still enjoy the cold winter days, the TFC 16 E ensures very agreeable temperatures.
BN30

Optimum room temperature control with the socket thermostat BN30

Just install it in the socket and connect it to the heating or cooling device on the socket thermostat BN30, and you can have your heating or cooling unit automatically switched on and off by the BN30 depending on the temperature. The socket thermostat available as an accessory is individually adjustable within a temperature range from 5 °C to 30 °C.

Radio thermostat BN35 with timer switch for the socket

Radio thermostat BN35

With the radio thermostat BN35 you can easily determine at which room temperature your heating or cooling unit will switch on or off using the remote control. The BN35 set consists of a radio-controlled socket and a radio thermostat. Simply plug the radio-controlled socket in between a wall outlet and your heating or cooling unit. Place the radio thermostat within approx. 20 metres in the place where the room temperature is to be measured. As an alternative, time-controlled regulation can also be carried out.

Buy

Technical data

Technical data
General information
  Article number 1.410.000.658
Heating capacity
  Level 1 [kW] 1.2
  Level 2 [kW] 2
Operating range
  Min. temperature [°C] -5
  Max. temperature [°C] 25
Fans
  axial
  Radial
  Number of fan stages 1
Electrical values
  Mains connection 220 - 240 V/50 Hz
  Nominal current consumption [A] 8.7
  Recommended fusing [A] 10
  Power input [kW] 2
Electric connection
  Connection plug CEE 7/17 (shaped plug)
  Cable length [m] 1.5
Sound values
  Distance 1 m [dB(A)] 60
Safety feature
  Overheating protection
  Internal oscillation (°)
Dimensions
  Length (packaging excluded) [mm] 175
  Width (packaging excluded) [mm] 135
  Height (packaging excluded) [mm] 228
Weight
  (packaging excluded) [kg] 1.5
Equipment, features and functions
Operation
  Steplessly adjustable thermostat
  Operating control lamp
  Tilt protection switch
  Automatic switch-off upon reaching the set value
Mobility
  Carry/transport handle(s)

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...
This product is only designed for use inside well insulated rooms or for occasional use.