Oxygen regenerator Zerozon 200 “made in Germany”
  1. Products & Services
  2. Machines - HighPerformance
  3. Disinfection / Odour neutralization
  4. Ozone disinfectors of the Airozon Professional series
  5. Zerozon 200

Oxygen regenerator Zerozon 200

The Zerozon 200 significantly accelerates the ozone depletion process and thus the economical reusability of rooms after they have been ozonized

Oxygen regenerator Zerozon 200
Zerozon 200 allows for an accelerated ozone depletion
Oxygen regenerator Zerozon 200

Mission: Zero ozone – the Zerozon 200 depletes the residual ozone in ozonized rooms up to 30 times faster than the natural ozone decay process would take

The ozone treatment of interior spaces is an equally effective and proven procedure for large-surface disinfection applications or for the effective elimination of odours resulting from fire and water damage.

So far, however, it has been required after every treatment to wait for the lengthy process of ozone depletion first, in the course of which the unoxidized ozone in the room slowly disintegrates into oxygen in a natural way. Because the rooms treated previously can only be safely entered if the values measured fall below the prescribed limit values again.

In the case of the natural disintegration method without oxygen regeneration technology, the specific half-life period of ozone determines the decay process. In interior spaces and under normal conditions, ozone usually has a half-life of approx. 30 to 60 minutes. This means that the ozone concentration in the room air only halves every hour in a natural way. The larger the room treated and the more powerful the ozone disinfector, the higher the ozone concentration in the room and, correspondingly, the more time-consuming the natural disintegration process.

In particular in the case of regular disinfection applications in the same rooms, the application-related reagent reduction furthermore inevitably brings about ever increasing ozone depletion phases, the waiting time until the room can be used safely again increases steadily, leading to ever more costly downtimes.

Effective lateral aeration could also accelerate the ozone depletion, however, the treated rooms are only rarely equipped adequately with the required possibilities for ventilation, for instance hotel rooms are often provided with secured windows, or cellar, storage and archive rooms do not have any windows.

Longer treatment duration, longer downtimes, higher costs – the innovative Zerozon 200 reduces all these factors in one sweep

The longer the treated rooms cannot be used again, the higher the costs caused by the downtime. The globally unique oxygen regenerator Zerozon 200 is the innovative solution to this problem, providing accelerated ozone depletion after an ozonization application with ozone disinfectors of the Airozon® Professional series.

The Zerozon 200 enables technical oxygen regeneration in ozone-laden rooms and in this way significantly accelerates their economical reusability. With the Zerozon 200, depending on the operating conditions, rooms that are decomposed with ozone can already be entered and used safely again after one thirtieth of the time that would be required for natural ozone disintegration!


Unique master-slave solution for an accelerated ozone depletion – exclusively available only at Trotec

The Zerozon 200 was designed specially for the combined use with all ozone disinfectors of the Airozon® Professional series was particularly designed for companies that primarily aim to use ozone generators for own purposes, beyond professional disinfection or fire or water damage restoration. For this purpose the Zerozon 200 is equipped with a dedicated power supply and a control panel for the Airozon® Professional device connected and in this way allows for synchronized combined operation of the two devices. As an alternative, standalone operation of the Zerozon 200 can also be performed.

In the Airozon® combi mode, the Zerozon 200 automatically switches off the coupled Airozon® device after reaching the treatment duration configured and automatically starts with the technical oxygen regeneration. For this purpose, the Zerozon 200 can be assembled with powerful special filters which effect an accelerated catalytic ozone depletion.

This special procedure for the ozone decomposition via the Zerozon 200 and originally fleece-coated catalysis filters from Trotec allow for a depletion process that is up to 30 times faster than the natural decay!

By the combined use of the Zerozon 200, therefore drastically shorter treatment times can be implemented, and the areas treated can be entered and used again much earlier!

Accelerated ozone depletion with Trotec’s Zerozon 200

Some of the convincing equipment benefits of the Zerozon 200

A dedicated power supply and a control panel for connected ozone disinfectors of the Airozon® Professional series allows for the synchronized combined operation of both devices.
Master-slave solution for ozone disinfectors of the Airozon® Professional series
A dedicated power supply and a control panel for connected ozone disinfectors of the Airozon® Professional series allows for the synchronized combined operation of both devices.
Master-slave solution for ozone disinfectors of the Airozon® Professional series
The design of the suction side grille plate offers a maximum reaction surface for the ozoniferous air, which is drawn in by a radial fan with a high pressure output.
Large reaction surface for ozone depletion
Helpful for billing purposes: By means of the operating hours counter that is integrated as a standard, the operating time of the Zerozon 200 can be precisely recorded.
Integrated operating hours counter
Helpful for billing purposes: By means of the operating hours counter that is integrated as a standard, the operating time of the Zerozon 200 can be precisely recorded.
Well-arranged control panel
In the warehouse and during transport, the Zerozon 200 can be stacked to save space, as interconnection also with the equally sized ozone disinfector Airozon® 20000.
Stackable construction

A few practical benefits:

  • Professional quality “made in Germany” – originally produced by Trotec
  • After room ozonization it effects a depletion process up to 30 times faster than the natural ozone decay
  • Compared to the natural depletion of ozone, ozone-decomposed rooms can already be safely entered again after one thirtieth of the time, depending on the operating conditions – thanks to the Zerozon 200
  • Unique master-slave solution for the combined use with all ozone disinfectors of the Airozon® Professional series
  • Equipped with a dedicated power supply and a control panel specially for Airozon® Professional devices connected
  • Originally fleece-coated catalysis special filters from Trotec for an extremely fast ozone decomposition
  • Robust, multi-stackable design – as interconnection also with the equally sized ozone disinfector Airozon® 20000 stackable
  • can also be used in standalone operation

Buy

Technical data

Technical data
General information
  Article number 1.180.000.019
Air flow rate
  Max. air volume flow [m³/h] 680
Electrical values
  Mains connection 220 - 240 V/50 - 60 Hz
  Max. power input [W] 175
  Nominal current consumption [A] 0.8
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 3
Dimensions
  Length (packaging excluded) [mm] 547
  Width (packaging excluded) [mm] 370
  Height (packaging excluded) [mm] 400
Weight
  (packaging excluded) [kg] 15.2
Equipment, features and functions
Regeneration mode
  Oxygen regeneration mode
Functions and features
  Operating control lamp
Timer
  integrated
Operating hours counter
  Operating hours counter

 standard equipment

 optionally available

 not available

Accessories

Loading...

Seminars

Downloads

Loading...