Submerged clear water pump TWP 7506 E
High-performance pump (max. 13,000 l/h) for wipe-dry results – with an adjustable residual water level
High-performance water pumping in the house and garden
With the powerful 750 W submerged pump TWP 7506 E, even large quantities of water can be transported in a very short time. The powerful high-performance pump with near-ground suction is recommended for universal use in the house, garden and business to pump out or recirculate slightly contaminated clear water (dirt particles sized max. 5 mm) in indoor and outdoor pools, whirlpools, garden wells, rain barrels, cisterns and rainwater retention basins. Moreover, the submerged clear water pressure pump can be used to dry out basements and living spaces flooded by washing machine leaks, heavy rainfall or the ingress of groundwater, leaving "wipe-dry" results and a low residual water level of 5 mm. When used in waterproofing of buildings, the TWP 7506 E pump, which is protected against the ingress of water by IPX8 type of protection, impresses as a low-maintenance and durable drainage pump for pumping accumulated rainwater or groundwater out of the drainage shaft in a controlled way.
Submerged clear water pumps of the TWP series at a glance
One of the most important criteria when selecting a submerged clear water pump is the pump capacity. Therefore, before purchasing, check whether the flow rate and delivery head are suitable for your application. For applications with lower flow rate requirements, the structurally identical model TWP 4006 E with a max. flow rate of 7,300 l/h may be a good choice.
Continuous operation and manual operation with preselected switch-on/switch-off height
The equally waterproof and impact-resistant plastic housing of the TWP 7506 E is designed for pumping clear water with a submersion depth of up to 7 metres. From a water level of only 55 mm, the submerged pump starts pumping out water. A particularly convenient feature is the option of using the pump in manual mode with individually preset switch-on and switch-off heights. For this purpose, the pump housing has a fastening option to lock the float switch at a certain height. If the otherwise freely movable float switch is fixed in the lock, the TWP 7506 E will pump continuously.
Tested for safety for long-lasting use
The maintenance-free high-performance submerged pumps of the TWP series are designed for long-lasting use even in harsh weather conditions. The powerful pump motors are equipped with an integrated thermal protection circuit to protect the pump technology from damage due to overheating during continuous operation. An integrated backflow preventer protects the pump against dirt and resulting damage. It also reduces the time to restart suction after the pump has stopped.
One for all: flexible hose, tube and plug-in system connections
With the submerged pressure pump TWP 7506 E you can go for "all in one" instead of "either or" when it comes to choosing the connection options. The submerged pump allows the connection of flexible hoses and rigid pipes with different diameters and threads as well as plug-in systems. The reduction required for this is already included in the scope of delivery with various connection sizes.
Flexible all-rounder: 360° elbow with Quick-Connect connection
The convenient elbow will turn your head. With it, hose, tube or plug-in systems can be attached to the pump quickly and easily with just one movement and flexibly positioned at any angle. Simply plug it in and remove it again at the push of a button when the work is done.
Connection options of the TWP 7506 E:
- Hose connection for an inner diameter of 25 mm or 38 mm
- Hose and pipe connection for internal threads G1"/DN25 or G1½"/DN40
For self-pumped water – everywhere
The carrying handle integrated in the pump housing simplifies the transport of the compact and only 5 kg light TWP 7506 E in the garden or at other locations. Additionally, it serves as a suspension for the nylon cord (10 m) included in the scope of delivery to lower the submerged pump into wells, cisterns or other basins.
Extensive accessory set – already included in the scope of delivery
Why pay extra for something when it is already included in Trotec's scope of delivery? The submerged clear water pump TWP 7506 E is supplied ready for connection including all necessary accessories:
- 1 x Submerged clear water pump TWP 7506 E
- 1 x Reducer for hoses with inner diameters of 25 mm or 38 mm as well as hose connections with G1"/DN25 internal thread
- 1 x Elbow for hose connections with G1½"/DN40 internal thread
- 1 x Quick connection for elbow
- 1 x Backflow stop (pre-installed)
- 1 x Stainless steel washer (pre-installed)
- 1 x Nylon cord (10 m)
- 1 x Manual
Unpack, plug in and get started!
With the submerged pump TWP 7506 E, you are ideally equipped for irrigation and drainage tasks in the house and garden when you are in deep water!
Special equipment features of the TWP 7506 E
The TWP 7506 E is extremely versatile
All submerged pumps in direct comparison:
To find the submerged pump which exactly meets your requirements, please consult the concise overview of all submerged pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Impressive 750 watts of power for pumping up to 13,000 litres per hour
- Maximum delivery head: 9.5 m
- Ideally suited for the recirculation of water and for pumping it off or out e.g. of swimming pools, rain barrels, wells or basements after a flood or heavy rainfall and during work in drainage shafts.
- For effortless pumping of clear water with suspended particles sized up to 5 mm
- Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
- Automatic switch-on/-off due to steplessly adjustable float switch
- Dry run protection during automatic operation
- Fixing option for the float switch for automatic operation
- Near-ground suction to a level of 5 mm resulting in a wipe-dry floor
- IPX8 type of protection – protected against the ingress of water upon immersion
- Universal connection for flexible coupling
- Incl. 360° elbow and hose adapter
- Easy hose connection thanks to Quick-Connect system
- Backflow preventer barring a return flow
- Large ergonomic carrying handle – suitable for fastening the suspension cord
All important features at a glance
Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority TÜV Rheinland certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.
Brand quality plus cost-efficiency
Reliable, powerful and suited for the most diverse clear water applications: Those are some of the quality features of Trotec's submerged clear water pumps. No matter the demands, owing to their high capacity these pumps are never out of their depth. HighPerformance in every respect – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!
Differences between our submerged clear water pumps TWP 7505 E and TWP 7506 E
|Submerged pump:||TWP 7505 E||TWP 7506 E|
|Particle size||5 mm||5 mm|
|Residual water level||3 mm||5 mm|
|Quick-Connect connection for elbow||—|
|Inner hose diameter||25 / 32 mm||25 / 38 mm|
|Threaded connectors||1" / 1¼" / 1½"||1" / 1½"|
|Backflow stop valve|
|Mains connection||230 - 240 V/50 Hz|
|Power input [kW]||0.75|
|Connection plug||CEE 7/4|
|Cable length [m]||10|
|Max. conveying capacity [l/h]||13,000|
|Grit of pump [mm]||5|
|Max. delivery head [m]||9.5|
|Max. submersion depth [m]||7|
|Minimum operating depth [mm]||55|
|Max. water level after suction [mm]||5|
|Max. water temperature [°C]||35|
|Type of protection||IPX8|
|Functions and features|
|On/off switch (float switch)||Automatic|
|Switch-on point float switch [mm]||550|
|Switch-off point float switch [mm]||120|
|Thermal overload protection|
|Suitable for both permanent operation (>10h) or salt-water operation|
|Accessories scope of delivery|
|Hose connection (inner diameter)||25 / 38 mm|
|Threaded connection||1";1 ½"|
|Length (packaging excluded) [mm]||220|
|Width (packaging excluded) [mm]||160|
|Height (packaging excluded) [mm]||340|
|(packaging excluded) [kg]||5|