Inspection camera system SeeSnake microDrain
Pipe camera for inspections in the installation or house connection sector covering a lenth of up to 10 metres
Full-featured hand-held inspection camera as a display unit
With its push cable of 10 metres length, which just like the camera head is waterproof to 8.1 bar, the robust microDrain is especially suited for inspection applications in the installation or house connection sector.
The supplied guide balls not only help to centre the camera head and to keep it away from contaminations on the tube sheet, but thanks to their smart design also enable a non-blocked passage of the probe tip in unwieldy pipe bends.
The compact system weighing less than 4 kg can be accommodated space-savingly in every vehicle and carried comfortably to the operating site.
Instead of housing a permanently integrated monitor, SeeSnake microDrain is designed as current-supplying display unit that can be used in combination with a micro CA digital inspection camera. Both systems can be directly ordered as an inexpensive complete set.
This way, you can cleverly extend the range of applications of your pipe camera, for the inspection cameras micro CA-350 and micro CA-350x are no mere display units, but full-fledged digital inspection cameras that can also be used autonomously for video or photo documentation.
Should you already own a micro CA digital inspection camera, the pipe camera can also be ordered separately for the combined application.
Special equipment features
Inspection camera system SeeSnake microDrain
All SeeSnake inspection systems in direct comparison:
To find the SeeSnake inspection system which exactly meets your requirements, please consult the concise overview of all SeeSnake inspection systems from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Easily operatable professional system
- Light weight
- Compact and robust design
- Scratch-proof sapphire crystal lens
- Adjustable multi-stage high-performance LEDs
- Camera head and push cable water-proof to 8.1 bar
- Glass fibre reinforced push cable, 10 m long
- Battery-supplied operation
standard equipment
optionally available
not available
Shop
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 3.110.007.021 | |
Probe | ||
Length [m] | 10 | |
Diameter Ø | Probe [mm] | 8.3 | |
90° bend flexibility in pipes = Ø 40 mm | ||
Camera head | ||
Diameter Ø | Camera head [mm] | 22 | |
waterproof to 8.1 bar | ||
Impact-proof cover with sapphire crystal lens | ||
Focussing range | ||
10 mm - ∞ | ||
Resolution | ||
628 x 586 pixels (PAL) | ||
510 x 496 pixels (NTSC) | ||
Illumination | ||
3 Luxeon LEDs | ||
Interfaces / plug design | ||
Plug design | System interface for micro CA-3xx | |
Material | ||
Plastics | ||
Power supply | ||
via micro CA-3xx | ||
Ambient conditions | ||
Min. temperature [°C] | 5 | |
Max. temperature [°C] | 46 | |
Min. relative humidity | 5 | |
Max. relative humidity | 95 | |
Dimensions | ||
Length (packaging excluded) [mm] | 324 | |
Width (packaging excluded) [mm] | 115 | |
Height (packaging excluded) [mm] | 483 | |
Weight | ||
(packaging excluded) [kg] | 3.9 |
Standard scope of delivery | ||
---|---|---|
Standard scope of delivery | ||
Connection cable for micro CA-300 | ||
Videoscope probe | ||
Side-view mirror, hook and magnet attachment | ||
Guide ball(s) | ||
Operating manual | ||
Pipe camera incl. micro CA-300 | ||
With integrated 512 Hz transmitter |
Ascertainable measured values and functions | ||
---|---|---|
Internal sensors | ||
Video documentation [MPEG] | ||
Photo documentation [JPEG] | ||
Functions and features | ||
Battery-supplied operation | ||
Storage in robust, portable plastic housing | ||
Colour camera | ||
Fibreglass-reinforced push cable | ||
Scratch-proof sapphire crystal lens | ||
Adjustable multi-stage high-performance LEDs |
standard equipment
optionally available
not available