Oil heater fan IDE 30
Flexible all-rounder for a wide range of heating applications: The ultra-mobile oil heater fan IDE 30
If you are looking for an equally cost-effective and reliable oil heating solution with clean, dry, warm air for the flexible heating of workshops, storage and production zones, construction sites or halls, the compact oil heater fan IDE 30 is our best recommendation.
Owing to its durable housing made of doubly coated material, this indirectly fired oil heater fan is optimally prepared for outdoor heating applications and can further be used for heating closed rooms when using the optionally available flue gas discharge.
The firing of the IDE 30 can variably be realized with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.
In addition to the integrated thermostat with digital dual display for actual and nominal value, an external thermostat is optionally also available as accessory for automatic temperature control; it can also measure the temperature of a place to be heated which is located up to 25 metres away from the oil heater fan IDE 30.
IDE indirect oil heaters – maximum heating power, clean warmth
The indirect oil heaters of the IDE series are ideally suited for rooms in which ventilation is only possible to a certain extent, but which still are to be used by people and animals. They are also a good choice for speeding up construction drying as well as in rooms where there is a fire hazard due to combustible substances.
In case of indirect heaters, the air to be heated is completely isolated from the combustion chamber.
The air is heated while flowing past the enlarged area of the combustion chamber, the heat exchanger. To be sure, the fan blowing out warm air also provides the required combustion air, but the combustion products are led away into the open air through a chimney.
Thus, in order to obtain both clean and dry warmth, we recommend using an indirect heater.
Unlike direct heaters, they do not emit any combustion products or water vapour into the room air, provided that the optionally available flue gas discharge is used.
VIDEOS: Trotec oil heater blowers live in action
In our Youtube playlist we have compiled exciting projects that users have realised with Trotec oil heater blowers. The application possibilities are manifold and the tinkerers have implemented their personal vision of a warm working environment with a lot of ingenuity and commitment. Very inspiring!
Special equipment features
Practical knowledge guidebook – heating know-how for professional users
Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.
A few practical benefits:
- Particularly economic solution for standard oil heating
- Integrated fuel tank with filling level indication
- Electronic flame trap
- Overheating protection
- Stainless steel combustion chamber
- Integrated thermostat with dual display for actual and nominal value
- Connection for external thermostat
- Carriage for easy change of location
Heat requirement calculation
In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.
All IDE oil heater fans in direct comparison:
To find the oil heater fan which exactly meets your requirements, please consult the concise overview of all oil heater fans of the IDE series from Trotec, which we’re providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
|Method of heating indirect|
|Method of heating direct|
|Air flow rate|
|Level Max. [m³/h]||780|
|Nominal heat output|
|Level Max. [kW]||30|
|Level Max. [kcal]||25,800|
|Level Max. [°C]||95|
|Mains connection||230 V, 50 Hz|
|Current consumption [A]||1.5|
|Power input [kW]||0.25|
|Heating capacity [kW]||30|
|Connection plug||CEE 7/7|
|Cable length [m]||1.2|
|Connection for external thermostat|
|Fuel feed||Danfoss pump|
|Level Max. [l/h]||2.8|
|Diameter | Hose connection [mm]||300|
|Diameter | Chimney connection [mm]||120|
|Distance 1 m [dB(A)]||78|
|EL fuel oil|
|Low-sulphur EL fuel oil|
|Length (packaging excluded) [mm]||1,107|
|Width (packaging excluded) [mm]||498|
|Height (packaging excluded) [mm]||766|
|(packaging excluded) [kg]||34.5|
|Equipment, features and functions|