1. Products & Services
  2. Powertools
  3. Sabre saws
  4. PRCS 10‑850

Sabre saw PRCS 10‑850

The universal "saw-it-all" with a high stroke length and a wide range of applications

Saw head adjustable in 3 positions – devised with a sharp eye for detail

What good is a high-performance sabre saw if it can hardly reach the workpiece?

In this regard, owners of a PRCS 10-850 are off the hook, for the innovative sabre saw not only impresses with a powerful 850 W motor for demanding cuts with 28 mm pendulum action.

The versatile adjustability of handle and saw blade is exceptionally user-friendly: For a start the saw head of the PRCS 10-850 can snap in place in three different positions adjustable by 90° each. Simply unlock and rotate it to the desired working position, then make sure the head is locked back into place. Moreover, when the bar handle has been rotated, the saw blade can additionally be turned around by 180°.

Consequently, the saw blade's position can be flexibly adjusted so as to reach otherwise poorly accessible locations – even overhead work can be achieved quite comfortably. Naturally, this is particularly useful in the garden, but also advantageous for renovation, expansion and reconstruction work.

The U-shaped control handle and slip-proof rubber front shaft with finger guard of the PRCS 10-850 permit two-handed guiding and control in every situation.

The ideal size-to-weight ratio of this power tool ensures optimum handling characteristics in every working position and an integrated LED work lamp sees to the illumination of poorly lit areas.

Full power, fine adjustment

Whether used for sawing various parts and materials to size, for cutting pipes to length, for taking apart old furniture or else for pruning back or cutting up branches – the sabre saw PRCS 10‑850 unites impressive technical performance data with a great number of innovative functions in one universal high-quality saw that can be used to carry out virtually any type of home and garden application at a tearing speed.

The pendulum action of the PRCS 10-850 can be used intuitively and regulated up to a level of 850 W by increasing the pressure applied to the start button: light pressure => low performance, pushed in all the way => full power – simple as that! Furthermore, the PRCS 10-850 is provided with a stroke rate limitation for material-compatible working integrated in the start button in form of a setting wheel.

Using this electronic control system you can adjust the maximum stroke rate precisely to the material type, thickness and the intended purpose.

Tool-free adjustment – unlimited possibilities

With an inclination angle of up to 30° the flexible guide shoe of this sabre saw can be adjusted to the workpiece surface and in order to limit the length of the cut you can also adjust its length as desired without even needing tools.

The quick-release chuck further permits a tool-free saw blade exchange in a matter of seconds. To make sure you are optimally prepared for any possible application purpose right from the start, the standard scope of delivery of the PRCS 10-850 holds four different high-quality saw blades for specific sawing operations in wood and metal.


The key equipment features of the PRCS 10-850 at a glance

Integrated LED work lamp
The devices houses a bright LED for the automatic illumination of the work space.
Saw blade exchange without the need for tools
The quick-release chuck permits the tool-free saw blade exchange in a matter of seconds.
Infinitely variable stroke rate control with preselected limit for material-compatible working
The stroke rate can be controlled by means of the start button and adjusted in accordance with the material via the setting wheel.
Guide shoe adjustable in length
For the desired plunging depth you can simply adjust the length of the guide shoe – and without tools, too.
3-position rotating saw head
The saw head of the PRCS 10‑850 can snap into place in three different positions. Simply unlock and rotate it to the desired working position, then make sure the head is locked back into place.
Large rubberized grip area
The large slip-proof rubber grip area with finger guard at the front allows for an extra firm and secure grip in every working situation.
U-shaped control handle
The U-shaped control handle with soft grip inlays ensures safe and simple operation.
Scope of delivery of the PRCS 10-850
The PRCS 10‑850 is delivered ready for use as complete set in a transport case containing two HCS saw blades for wood with 10 TPI, one HCS saw blade for wood with 4 TPI and one BIM saw blade for metal with 18 TPI.

The versatile sabre saw PRCS 10-850 is suited for as good as every application in and around your home

Sawing close to the edge is not a problem
Using the PRCS 10‑850 sawing close to the edge is not a problem. The flexible bi-metal saw blade included in the scope of delivery enables you to saw off protruding objects such as water pipes directly at the wall.
Plunge cutting made easy
The adjustable guide shoe of the PRCS 10‑850 allows for a precise adjustment of the plunging depth, also the inclination angle can be adjusted by up to 30° to the workpiece surface.
Sabre saws

All Sabre saws in direct comparison:

To find the Sabre saw which exactly meets your requirements, please consult the concise overview of all Sabre saws from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Branded sabre saw in TÜV-tested quality
  • Stroke rate control via trigger
  • Preselectable stroke rate limitation for material-compatible working
  • Quick-release chuck for a tool-free saw blade exchange in a matter of seconds
  • 3-position rotating saw head for optimum accessibility of the workpiece
  • U-shaped control handle with soft grip inlays
  • Rubberized grip area at the front for extra firm grip
  • Perfectly balanced size-to-weight ratio for optimum handling
  • Integrated LED work lamp
  • Suitable for commercially available S-shank saw blades

All important features at a glance

Powerful 850 W motor
Idle speed 0 to 2,800 rpm
Electronic control for a constant stroke rate
Reciprocating movement of the saw blade
Stroke rate control via trigger
Stroke rate adjustment for material-compatible working
Universally applicable with S-shank saw blades
3-position rotating saw head
Designed for continuous operation
No additional tools required
Integrated LED work lamp
Cutting depth can be adjusted via the guide shoe
Soft grip for improved handling
3 m cable for a wide operating range
Saw blade exchange without the need for tools
Including transport case
Scope of delivery of the PRCS 10-850

The PRCS 10‑850 is delivered ready for use as complete set in a transport case containing two HCS saw blades for wood with 10 TPI, one HCS saw blade for wood with 4 TPI and one BIM saw blade for metal with 18 TPI.


With the PRCS 10-850 you are always on the safe side, for this jigsaw is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.

Brand quality plus cost-efficiency

So far, you basically only had two options when choosing a sabre saw: either good but expensive, or mainly cheap.

Trotec's PowerTools now offer a smart choice: good and cheap at the same time. For we do not only stand for measuring devices and air conditioners, but also for power tools of brand quality: professional Trotec solutions with an excellent value-for-money ratio!

TÜV – Tested for safety

Trotec's 3 sets of sabre saw blades at a glance:

Demolition set for wood/metal, 5-piece

• 2 x Saw blades for wood and metal (demolition)
Length: 6" ≈ 15 cm, Thickness: 1.7 mm
Material: Bimetal (BIM, hard metals / steel alloy)
Saw tooth pitch: 5/8 TPI, milled, free cut, alternate set

• 2 x Saw blades for metal (demolition)
Length: 6" ≈ 15 cm, Thickness: 1.7 mm
Material: Bimetal (BIM, hard metals / steel alloy)
Saw tooth pitch: 8/10 TPI, milled, free cut, wavy set

• 1 x Saw blade for wood and metal (demolition)
Length: 9" ≈ 23 cm, Thickness: 1.7 mm
Material: Bimetal (BIM, hard metals / steel alloy)
Saw tooth pitch: 5/8 TPI, milled, free cut, alternate set

 

 

Carbon steel set, 10-piece

• 2 x Saw blades for wood with nails and metal
Length: 6" ≈ 15 cm, Thickness: 1.1 mm
Material: Bimetal (BIM, hard metals / steel alloy)
Saw tooth pitch: 18 TPI, milled, free cut, wavy set

• 2 x Saw blades for wood and plastics
Length: 6" ≈ 15 cm, Thickness: 1.4 mm 
Material: Carbon steel (quenched and tempered steel with carbon to provide for more strength)
Saw tooth pitch: 10 TPI, milled, free cut, alternate set

• 4 x Saw blades for wood and plastics
Length: 6" ≈ 15 cm, Thickness: 1.4 mm 
Material: Carbon steel (quenched and tempered steel with carbon to provide for more strength)
Saw tooth pitch: 6 TPI, milled, free cut, alternate set

• 2 x Saw blades for wood and plastics
Length: 8" ≈ 20 cm, Thickness: 1.5 mm 
Material: Carbon steel (quenched and tempered steel with carbon to provide for more strength)
Saw tooth pitch: 6 TPI, milled, free cut, alternate set

Sabre saw blade set set, 12-piece

• 3 x Saw blades for wood with nails
Length: 6" ≈ 15 cm, Thickness: 1.4 mm
Material: Bimetal (BIM, hard metals / steel alloy)
Saw tooth pitch: 6 TPI, milled, free cut, alternate set

2 x Saw blades for metal
Length: 6" ≈ 15 cm, Thickness: 1.1 mm
Material: Bimetal (BIM, hard metals / steel alloy)
Saw tooth pitch: 14 TPI, milled, free cut, alternate set

3 x Saw blades for metal
Length: 9" ≈ 23 cm, Thickness: 1.1 mm
Material: Bimetal (BIM, hard metals / steel)
Saw tooth pitch: 18 TPI, milled, free cut, wavy set

• 3 x Saw blades for wood with nails
Length: 9" ≈ 23 cm, Thickness: 1.4 mm
Material: Bimetal (BIM, hard metals / steel)
Saw tooth pitch: 6 TPI, milled, free cut, alternate set

• 1 x Saw blade for wood and metal (demolition)
Length: 9" ≈ 23 cm, Thickness: 1.7 mm
Material: Bimetal (BIM, hard metals / steel alloy)
Saw tooth pitch: 5/8 TPI, milled, free cut. alternate set

 

 

Buy

Sabre Saw PRCS 10-850 show in Trotec online shop

Sabre Saw PRCS 10‑850

The sabre saw PRCS 10‑850 combines convincing technical performance data with a multitude of innovative functions in a high-quality universal saw, with which practically all applications at home and in garden can be done quickly and safely.

You save: 33 %

60.31 £ 40.20 £ incl. VAT Show net price (VAT not included)

buy

Technical data

Technical data
General information
  Article number 4.431.000.010
Technical data
  Stroke rate at no load (combined) 0 - 2.800 min-1
  Stroke [mm] 28
  Max. cutting depth (wood) [mm] 160
  Max. cutting depth (aluminium) [mm] 12
  Max. cutting depth (metal) [mm] 8
Electrical values
  Mains connection 230 V/50 Hz
  Power input [W] 850
  Protection class II
Electric connection
  Plug type CEE 7/17
  Cable length [m] 3
Sound values according to EN 62841
  Sound pressure level [dB(A)] 91
  Sound power level [dB (A)] 102
  Uncertainty (K) [dB] 3
Vibration information according to EN 62841
  Vibration emission value (ah) Boards [m/s²] 18.6
  Uncertainty (K) Boards [m/s²] 1.5
  Vibration emission value (ah) Wooden beam [m/s²] 22.2
  Uncertainty (K) Wooden beam [m/s²] 1.5
Dimensions
  Length (packaging excluded) [mm] 463
  Width (packaging excluded) [mm] 161
  Height (packaging excluded) [mm] 93
Weight
  (packaging excluded) [kg] 3
Equipment, features and functions
Functions and features
  Infinitely variable speed control (on/off switch)
  Continuous operation
  Speed control during continuous operation
  Soft start
  Tool-free exchange of accessories
  Universal holder / S-shank fitting
  Guide shoe adjustable without tools
  Guide shoe can be inclined by 30°
  Main handle can be adjusted in 3 positions 90° left/right, Centre position
  Softgrip
  LED light

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...