Laser distance meter TD200
The new champion among Trotec distance meters for professional measuring applications up to a range of 200 m
TD200 – the professional Trotec distance meter with complete equipment in terms of functions and performance
Mud, rain and dust put no stop to the TD200’s measuring. Because the extremely robust IP65 construction of our distance meter flagship easily withstands drops from up to 1 m and is water-jet-proof as well as dust-proof. This allows you to clean the device even under running water and makes the TD200 the ideal choice for daily construction site applications.
Its inner values are equally impressive: 15 different measuring modes leave nothing to be desired. In addition to direct or indirect distance and height measurements, the TD200 quickly and reliably calculates circular, rectangular or triangular areas, partial distances or cylinder volumes.
The ingenious interaction of the digital camera with 3x zoom, target finder and 360° tilt sensor does not only enables precise long-distance measurements up to a range of 200 metres but also many measurement applications that cannot easily be carried out with conventional devices.
As successfully designed as favourably calculated
The combination of a robust design suitable for construction sites, a high measuring range and numerous practical functions and features – all combined in a compact device with an excellent value-for-money ratio. This makes the distance meter TD200 our best recommendation for professional use by building experts, architects and tradesmen.
The distance meter TD200 comes with a variety of professional equipment features:
Range up to 200 m
Combining advanced laser technology with high measurement accuracy, the TD200 allows you to perform distance measurements up to a range of 200 metres.
Bluetooth integrated
The integrated Blutooth function makes the TD200 a future-proof investment with a suitable interface for upcoming app innovations.
IP65 type of protection
Thanks to its IP65 protection type, the robustly designed TD200 can withstand both dust and water jets – ideal for rough construction site applications in any weather conditions.
Integrated camera with automatic target finder
A camera with 3x zoom simplifies aiming at distant targets and automatically marks the measuring point on the display.
Automatic display rotation
When holding the TD200 horizontally, the display can rotate automatically. This function makes it easy to read the display in any measurement situation.
Selection of light/dark mode
The option to select between a light and dark mode provides for optimally readable display values in all lighting conditions.
Large memory for measured values and photos
The TD200’s data memory can record the last 1,000 measurements and also offers storage capacity for up to 100 screenshots.
Three different reference points can be selected
As you can choose from a top side, rear side or tripod reference point, the TD200 will always provide for precise measurements in any situation.
Tilt sensor and digital spirit level
The TD200 comes with a digital spirit level and a precise 360° tilt sensor that automatically determines and displays the inclination for angle-based calculations.
The TD200 offers you all the measuring functions you would expect from our top-of-the-range model – and much more:
Automatic height measurements
The height is automatically calculated on the basis of the inclination angle and by measuring two distances, i.e. the start and end point of the searched distance.
Area calculation
After measuring the width and length of an area, the TD200 automatically calculates the corresponding area and indicates all three values.
Indirect length measurements
The “Auto Level” function combines distance and inclination measurements so that horizontal distances can be determined with just one measurement, even past obstacles.
Circular area calculation
By performing the individual measurement of the diameter of a circle, the TD200 automatically calculates the area and circumference of the circle and displays both values.
Cylinder volume calculation
After measuring the diameter and height of a cylinder, the TD200 automatically calculates the cylinder volume as well as the circular area and displays both values.
Point-to-point distance measurement
The P2P function can be used to measure the distance between any two points from one location.
2-point Pythagoras function
The distance between the two end points can be determined automatically by measuring the distance between two end points if one measurement is taken at a “right angle”.
3-point Pythagoras for indirect height measurements
This function allows for indirect height or length measurements even without line of sight or if obstacles are in the way.
3-point Pythagoras for partical distance calculations
Partial heights or widths can also be calculated with the TD200 using the 3-point Pythagoras function.
Individual or non-stop measurements
Instead of performing individual measurements, you can also set a continuous mode. In this mode, the distance is determined continuously and the minimum and maximum values are also displayed.
Marking-out function
If objects are to be placed at equal distances, this function helps to determine the stakeout points. Approaching the target point is indicated by the TD200 by means of a display indication and a signal tone.
2-point trapezoidal function
The 2-point trapezoidal function helps to calculate the length of oblique elements, such as roof parts. The desired length is then calculated from two individual measurements and the determined inclination angle.
3-point trapezoidal function
If a 2-point measurement cannot be performed due to obstacles, the length of oblique elements can be measured by means of the 3-point trapezoidal function. In this case, the length is calculated from three individual measurements.
Special equipment and functional features of the TD200
 |
 |
 |
 |
 |
 |
A few practical benefits:
- Professional distance meter for laser-precise distance measurements up to a range of 200 m
- 360° tilt sensor and integrated digital camera with target finder
- Pythagoras functions for partial distance calculations and indirect measurements past obstacles
- Wide range of functions for automatic calculation of circular, rectangular or triangular areas, partial distances as well as cylinder volumes
- Design suitable for construction sites thanks to IP65 type of protection
- With digital spirit level and tripod connection
- Easy-to-read, 4-line measurement value display
- Fast and ergonomic measurements thanks to two measurement buttons on the front and on the side
- Automatic screen rotation
- Non-stop measuring mode with MIN/MAX function
- Addition and subtraction of measuring results
- Three selectable reference points for measuring from the front or rear edge as well as from the tripod
- Mute function
- Inductive charging option
- Bluetooth function – integrated future-proof solution for upcoming app innovations
- Memory for 1,000 measured values and 100 screenshots
The digital camera with 3x digital zoom and target finder allows for precise long-distance measurements up to a range of 200 metres – even in unfavourable lighting conditions. This function of the TD200 is particularly an advantage in outdoor areas. The target finder always marks the target exactly in the crosshairs of the display, even if the red laser dot on the target can no longer be seen with the human eye.
Professional equipment and functions are important to you, but a lower range would also be sufficient?
Then our distance meter TD120
could be the ideal measuring device for your needs!
With a max. range of 120 metres, integrated tilt sensor, digital and analogue spirit level, robust IP54 design as well as numerous measuring functions, the Trotec distance measuring device TD120 is the optimal solution for budget-conscious users with professional ambitions.
All distance measuring devices in direct comparison:
To find the measuring device which exactly meets your requirements, please consult the concise overview of all distance measuring devices from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
Buy
/de_DE/3510001145/Laser-Entfernungsmesser-TD200-145243-1656084566.jpg)
Laser-Entfernungsmesser TD200
You save: 89.00 €
498.99 €
409.99 €
incl. VAT
Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 3.510.001.145 | |
| Distance measurement | ||
| Min. measuring range [m] | 0.2 | |
| Max. measuring range [m] | 200 | |
| Resolution | 0,1 mm | |
| Typical measuring tolerance | +/-2 mm | |
| Inclination measurement | ||
| Measuring range | Inclination measurement | 360° | |
| Messgenauigkeit typ. | ±0,3° | |
| Laser | ||
| Ø of the laser point at distance 10 m [mm] | 6 | |
| Ø of the laser point at distance 20 m [mm] | 11 | |
| Ø of the laser point at distance 30 m [mm] | 18 | |
| class | 2 | |
| output < [mW] | 1 | |
| Wavelength [nm] | 630 - 670 nm | |
| Memory organisation | ||
| Saving of up to 1.000 measurements | ||
| Saving of up to 100 screenshots | ||
| Display | ||
| 3" HD colour display | ||
| hintergrundbeleuchtet | ||
| Monochrome | ||
| Device control | ||
| Push buttons | ||
| Interfaces | ||
| Micro USB | ||
| Bluetooth | ||
| Housing design | ||
| Plastics | ||
| Type of protection | ||
| IP65 | ||
| Power supply | ||
| Internal (battery) | 3 x 1,2V AAA Ni-MH | |
| Ambient conditions | ||
| Operation - min. temperature [°C] | 0 | |
| Operation - max. temperature [°C] | 40 | |
| Storage - min. temperature [°C] | -10 | |
| Storage - max. temperature [°C] | 60 | |
| Dimensions | ||
| Length (packaging excluded) [mm] | 28 | |
| Width (packaging excluded) [mm] | 54 | |
| Height (packaging excluded) [mm] | 130 | |
| Weight | ||
| (packaging excluded) [kg] | 0.19 | |
| Standard scope of delivery | ||
|---|---|---|
| Standard scope of delivery | ||
| Measuring device | ||
| Holster | ||
| Wrist strap | ||
| Battery(-ies) | ||
| USB cable | ||
| Getting started guide | ||
| Ascertainable measured values and functions | ||
|---|---|---|
| Internal sensors | ||
| Distance [m] | ||
| Distance [ft] | ||
| Distance [in] | ||
| Functions and features | ||
| Minimum value display | ||
| Maximum value display | ||
| Automatic switch-off | ||
| Bluetooth | ||
| 2-point Pythagoras function | ||
| 3-point Pythagoras function (indirect height measurement) | ||
| 3-point Pythagoras function (partial distance determination) | ||
| Automatic height measurement | ||
| Indirect length measurement | ||
| Area calculation | ||
| Volume measurement | ||
| Circular area calculation | ||
| Cylinder volume calculation | ||
| Point-to-point distance measurement | ||
| Triangle function | ||
| Marking-out function | ||
| Trapezoid function | ||
| Non-stop measuring function | ||
| Addition | ||
| Subtraction | ||
| Cylinder function | ||
| Automatic screen rotation | ||
| Bright-dark mode (display) | ||
| Tilt sensor | ||
| Integrated digital camera | ||
| Self-timer | ||
| Inductive charging | ||
| Sounds | ||
| Horizontal spirit level vial | ||
| Vertical spirit level vial | ||
| Referenzpunktauswahl | Oberseite, Unterseite, Stativ | |
standard equipment
optionally available
not available