Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Radial fan TFV 29 FS for surface drying
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Ventilation
  4. Surface dryer TFV 29 FS

Radial fan TFV 29 FS

Flexibly usable surface dryer in a space-saving slim design

Radial fan TFV 29 FS
Radial fan TFV 29 FS
Radial fan TFV 29 FS

The ingenious construction of this radial fan with ideally shaped, robust metal vanes permits a high air flow rate at maximum pressure and simultaneously minimum height. For this reason the TFV 29 FS in space-saving, slim design is extremely powerful despite its low height and achieves a perceptible reduction of the drying period.

The centre of gravity and shape of the TFV 29 FS were designed specifically in view of four different installation positions: near the ground, tilted, upright with the air discharge direction towards the sky or to the side. This versatility makes the turbo dryer the ideal solution for every task.

Owing to the flexibly adjustable operating position floor spaces can be dried off as quickly as walls, ceilings or entire stairwells and the resulting humid air can be fed to an additional condenser dryer. The TFV 29 FS even fits into rather confined spaces without difficulty.

In addition to the splash-proof operating switch and a standard operating hours counter the control panel of the TFV 29 FS also accommodates a service socket with the result that combined with the long connection cable of the TFV 29 FS several devices can conveniently be connected in series to just one power outlet.

The TFV 29 FS is equally powerful and easy-to-transport: as a result the drying operation is quickly completed and with its light weight and carrying handles on both sides as well as the integrated cable holder the device can be transported safely without trip hazard. Inside a service vehicle or equipment storage facility several specimens of TFV 29 FS can stacked on top of one another to save space.

* What does MID compliant mean?

The European Measuring Instruments Directive (MID) has replaced the existing rules of national approval and subse-quent calibration in some areas. As a result, all power meters, which are used for energy consumption billing, must be MID compliant in the future.

Stackable to save space

The TFV 29 FS is an extremely light, stackable and compact blower. Due to the low design height a stack comprising 5 devices adds up to a storage height of only marginally more than one metre – perfect for space-saving transport and storage.

Optionally also available with a MID-compliant* dual counter for operating hours and energy consumption

Rather than just with a standard operating hours counter, the TFV 29 FS is optionally also available with a MID-compliant dual counter for operating hours and energy consumption.

Four drying positions, countless application possibilities – with the TFV 29 FS you are optimally prepared at all times

The TFV 29 FS can be used in 4 installation positions

Tilted – The stand bar integrated at the bottom can be folded out for tilting the TFV 29 FS, thus permitting the ventilation and drying of walls or entire stairwells.

The TFV 29 FS can be used in 4 installation positions

Close to the ground – In this position the discharged air is distributed at high speed in a broad, near-ground air current which leads to an accelerated surface drying.

The TFV 29 FS can be used in 4 installation positions

Upright with air discharge at the top – For a dry air current specifically directed at the ceiling.

The TFV 29 FS can be used in 4 installation positions

On edge with lateral air outlet – Ideal for drying operations in confined spaces or of extensive wall surfaces.

A few practical benefits:

  • Robust, slim and compact housing
  • Four possible installation positions to speed up the drying process according to the respective situation
  • Light construction – easy to handle
  • Multi-stackable for storage and transport to save space
  • Integrated service socket
  • MID-compliant* dual counter for operating hours and energy consumption (optional)
  • Several devices can be connected in series to just one power socket (daisy-chain connection)


Radialventilator TFV 29 FS show in Trotec online shop

Technical data

Technical data
General information
  Article number 1.510.003.025
Air flow rate
  Level Max. [m³/h] 1,150
Air current
  Blowing out
  Sucking in
  stages 1
Air discharge velocity
  Air discharge speed [m/s] 7
Air pressure
  Level Max. [Pa] 290
Transport medium temperature
  max. [°C] 60
Electrical values
  Mains connection 230 V, 50 Hz
  Nominal current consumption [A] 0.74
  Power input [kW] 0.17
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 5
Safety feature
  IP type of protection IP44
Sound values
  Level 1 - Distance 3 m [dB(A)] 64
Operating hours counter
  Dual counter for operating hours and energy consumption - opt
  Length (packaging excluded) [mm] 520
  Width (packaging excluded) [mm] 450
  Height (packaging excluded) [mm] 255
  (packaging excluded) [kg] 11
Equipment, features and functions
  Carry/transport handle(s)
Shelf life

 standard equipment

 optionally available

 not available



Alternative products