Garden pump TGP 1000 ES
Powerful 1,000-watt garden pump of stainless high-grade steel
Facilitates watering, sprinkling, pumping off and recirculation
Gardening enthusiasts are familiar with the problem: the larger the green, the more complex the watering of the lawn, the flower beds, shrubs and trees. This applies in particular for high summer when daily watering is necessary to quench the thirst of the plants and protect the lawn from drying up.
With the robust stainless steel garden pump TGP 1000 ES Trotec offers you the suitable solution for reliable, effective and economical garden irrigation or watering with alternative service water.
Utilizable for almost every alternative water source at home and in the garden
The impressive 1,000-watt garden pump TGP 1000 ES can be switched on and off separately and pumps a volume of up to 3,300 litres of free-of-charge service water per hour with a maximum suction head of 7 metres (rainwater, spring water, running water or groundwater) from lower-lying wells, courses of a stream, rain barrels, cisterns or other alternative water sources. They are ideally suited to supply sprinklers, hoses, showers or micro-drip systems with water at zero cost for simultaneous watering or to pump off water from swimming pools, drain water collection tanks or recirculate their contents. The water sucked in may contain particles sized up to 2 mm and can be transported up to a discharge head or conveying distance of 42 metres.
The handy pump with its practical handle can be utilized ideally for mobile use in different locations and, thanks to their weatherproof stainless steel housing, is equally recommended for continuous fixed installation in the rain-protected outdoor area or in basement rooms. For operation at a fixed location the stable pump foot is provided with bore holes for secure fastening.
Weatherproof stainless steel housing – durable technology
The stainless steel housing of the garden pump TGP 1000 ES, which is protected against splash water from all sides by its IPX4 type of protection convinces with a high corrosion resistance, even withstands a downpour and displays its radiant shine throughout the year! Nothings will rust here, and even light impacts or extreme temperatures cannot harm the robust pump housing.
All-in-one solution supplied ready for connection
Designed for maximum durability, the garden pump is equipped with an extremely corrosion-resistant aluminium winding motor with a high-quality ceramic face seal. The stable metal threads (inside diameter 1“ or 3.33 cm (G1)) of the suction and pressure connections allow for the connection of flexible hose lines – the pump can also be connected to fixed pipes with a corresponding diameter. With the switch on the side the pump can be switched on or off manually. Owing to the large inlet opening the pump can quickly and easily be filled with a little water prior to start-up. When storing the device for an extended period of time, e.g. during the winter, any residual water can easily be discharged via the water drain screw – as a result, the TGP 1000 ES is protected against potential frost damage.
Tested for safety with overheating protection
Where electricity and water come together, operational safety is of utmost importance. With the TGP 1000 ES you are always on the safe side. The operational safety of the pump was tested by the inspection authority of TÜV Rheinland. Furthermore the pump is equipped with a thermal protection circuit which is activated in the event of overheating and which switches off the device in a fully automatic fashion. Better safe than sorry.
The all-round pump for a large variety of application options
Already with the very first time of using the garden pump TGP 1000 ES you'll save expensive drinking water and therefore hard cash in your annual water billing. After all, nature supplies us with free-of-charge rainwater and groundwater to be used in unlimited quantities with free delivery.
Garden watering – also with several sprinklers
The larger the garden and the hotter the summer, the more water is required for watering. Large lawn areas, in particular, have an almost insatiable thirst for water. But also shrubs, planting beds and hedges must be protected from drying out in summer. The TGP 1000 ES allows you to use service water from wells,cisterns, rain barrels or other alternative sources of water free of charge, for example for watering the lawn by means of a sprinkler system, the flowers, hedges and shrubs with a garden hose, or for supplying the flower beds with vital water using a micro-drip watering system.
Cleaning applications using a high-pressure cleaner
When cleaning terraces, pavements, or natural stone walls by means of a high-pressure cleaner, rely on service water conveyed free-of-charge with the TGP 1000 ES. Work of this kind does not require drinking water quality!
Car wash by means of a water hose
Also use your garden pump TGP 1000 ES for a car wash with cold water. Clear rainwater is usually absolutely sufficient to free your dirty vehicle from coarse dirt using a water hose.
Pumping out swimming pools
Outdoor pools are very popular in summer. However, even the most beautiful summer will come to an end at some point and this is where the TGP 1000 ES will help you with pumping out to send your pool into its winter break.
Special equipment features of the TGP 1000 ES
All garden pumps in direct comparison:
To find the garden pump which exactly meets your requirements, please consult the concise overview of all garden pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Impressive 1,000 watts of power for pumping up to 3,300 litres per hour
- Maximum delivery head: 42 m, suction head up to 7 m
- Ideally suited for the withdrawal and recirculation and suction of water e.g. for rain barrels, cisterns and garden ponds
- Effortless watering of the garden in continuous mode until manual switch-off
- Robust pump housing made of weatherproof stainless steel and high corrosion resistance due to aluminium winding motor
- Stable metal threads both on the suction and pressure side
- High-quality ceramic face seal for a long lifetime
- Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
- For the pumping of clear water with suspended particles sized up to 2 mm
- IPX4 type of protection for the pump – splash-proof from all directions
- IP44 type of protection for the mains plug – splash-proof
- Connections of the pressure and suction line with 1" internal thread
- User-friendly thanks to the large inlet opening for easy filling of the pump
- Protected against frost – residual water can be discharged conveniently via the water drain screw
- Convenient on/off switch
- Integrated carrying handle for quick operational readiness at various locations
- Stable pump foot with holes for easy fastening
All important features at a glance
Delivery head and flow rate of the TGP 1000 ES
Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority TÜV Rheinland certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.
Brand quality plus cost-efficiency
Reliable, powerful and suited for the most challenging fields of application: these are some of the quality features of Trotec's garden pumps. Owing to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!
Buy
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 4.610.000.106 | |
| Electrical values | ||
| Mains connection | 230 V, 50 Hz | |
| Power input [W] | 1,000 | |
| Electric connection | ||
| Connection plug | CEE 7/7 | |
| Cable length [m] | 1.2 | |
| Performance data | ||
| Max. conveying capacity [l/h] | 3,300 | |
| Feed pressure [bar] | 4.2 | |
| Grit of pump [mm] | 2 | |
| Max. delivery height [m] | 42 | |
| Max. suction height [m] | 7 | |
| Max. water temperature [°C] | 35 | |
| Pressure connection | 1" | |
| Suction connection | 1" | |
| Safety feature | ||
| Type of protection | IPX4 | |
| Protection class | I | |
| Sound values | ||
| Sound pressure level [dB(A)] | 72 | |
| Sound power level [dB] | 88 | |
| Uncertainty (K) [(K)] | 2 | |
| Housing design | ||
| Aluminium housing | ||
| Stainless steel pump head | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 210 | |
| Width (packaging excluded) [mm] | 330 | |
| Height (packaging excluded) [mm] | 200 | |
| Weight | ||
| (packaging excluded) [kg] | 6.5 | |
| Equipment, features and functions | ||
|---|---|---|
| Functions and features | ||
| ON/OFF switch | ||
| Electronic pressure switch | optional | |
| Thermal overload protection [° C] | 150 | |
| Water inlet opening | ||
| Water drain screw | ||
| Backflow preventer | ||
| Stainless steel screws | ||
| Suitable for both permanent operation (>10h) or salt-water operation | ||
| Overheating protection | Available | |
| Standard scope of delivery | ||
|---|---|---|
| Accessories scope of delivery | ||
| Carrying handles | ||
standard equipment
optionally available
not available