Materialfeuchte-Sensor TS 660 SDI
  1. Products & Services
  2. Measuring devices
  3. Multifunction
  4. T3000
  5. SDI sensors
  6. Material moisture sensors
  7. TS 660 SDI

Material moisture sensor TS 660 SDI

Moisture sensor for the T3000 multifunction measuring meter for the non-destructive detection of moisture distribution in near-surface areas with a depth of up to 4 cm.

Multifunctionality at its best

The innovative concept of a universal base device T3000, which is supplemented with flexibly exchangeable sensors , frees users from the need to always carry a complete collection of individual measuring devices with them for their measuring jobs.

A simple sensor change transforms your T3000 into exactly the special measuring device that you currently need. No further settings are required on the device because the intelligent technology of the T3000 automatically recognizes the connected sensor.

Electronic building moisture indicator for the non-destructive measurement in building materials. The versatile spherical probe serves to detect moisture in building materials. Ideal pre-testing instrument for all CM devices and resistance-based measuring devices. The field of application of this dielectric humidity sensor is non-destructive detection of moisture distribution in near-surface areas (walls, ceilings, floors) up to 4 cm.

Alarm function

For all material moisture sensors an individual alarm limit value can be set.

Thanks to this function large areas can be measured fast and effectively without continuously watching the display: Once the selected limit value is exceeded, the SDI sensor alerts the user emitting an acoustic signal!

Ideal for combined measurements of multidimensional moisture distributions.

When carrying out material moisture measurements with the T3000, you can either choose measuring an unspecific material, or directly select anhydrite or cementitious screed and have the measurement results displayed indicatively in mass % and CM %
Material moisture measurement
Moisture distributions can be recorded in a grid measurement and graphically visualized directly in the measuring device. During grid measurement the yellow field indicates the current measuring spot and automatically moves on to the next grid upon confirmation of the measured value.
Grid measurement

All SDI sensors in direct comparison:

To find the SDI-Sensor which exactly meets your requirements, please consult the concise overview of all SDI sensors from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison


TS 660 SDI Materialfeuchte-Sensor show in Trotec online shop

Technical data

Technical data
General information
  Article number 3.510.220.275
Material moisture
  Min. measuring range | Material moisture 0.0 digit
  Max. measuring range | Material moisture 200.0 digit
  Resolution 0.1 digit
  Accuracy | Material moisture 0.1 digit
  Penetration depth [mm] 40
  Measuring principle Dielectric
Interfaces / plug design
  Plug design SDI connector
  Borehole for banana jack
Dimensions of sensor element
  Length [mm] 55
  Diameter [mm] 20
Material of sensor element
  Stainless steel
Material of handle
  Material Plastics
  Length (packaging excluded) [mm]
  Width (packaging excluded) [mm]
  Height (packaging excluded) [mm]
Ascertainable measured values and functions
Internal sensors
  Material moisture (dielectric) [digits]
  Material moisture (electric resistance) [digits]
  Material moisture (microwave) [digits]
Functions and features
  Non-destructive surface moisture measurement to up to 4 cm
  Acoustic alarm thanks to integrated piezo signal transmitter
  Automatic calibration during start-up
  Measurement method independent from salinization
  Non-destructive sub-surface moisture measurement to up to 30 cm

 standard equipment

 optionally available

 not available



Alternative products