Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Acoustic Tube Probe LD6000 PTS
  1. Products & Services
  2. Measuring devices
  3. Leak detection
  4. Combination measuring devices for leak detection
  5. LD6000PTS

Acoustic Tube Probe LD6000PTS

For acoustic leak detection directly in the pressurized water line – also on the house connection side

The remediation of damage after pipe bursts requires a definite clarification of the responsible cost centre.

Has the damage occurred on the terrain of the building's proprietor or on the side of the water supply network?

If to this end one would like to carry out an above-ground acoustic leak detection to locate the damage, the pipeline course must be perfectly clear, which is hardly ever the case. And, so far, pinpoint locating directly in the house connection line has not been possible without further ado.

Finally, using the acoustic tube probe LD6000PTS, pipe bursts can quickly and easily be detected on the side of the house connection, too! 

The ingenious combination of compact, bendable pig probe with integrated precision microphone and contactable probe cable enables the acoustic detection of the point of leakage including locating function.

According to regulations, probe and push cable of the LD6000PTS can be disinfected and directly channelled into the pressurized water line on the house connection side.


Flexible application and combination possibilities

Unaffected by ambient sounds, the precision microphone of the LD6000PTS captures even extremely silent noises inside the pipe, which are wirelessly conveyed to the supplied headphones via the Bluetooth transmitter.

Experienced measurement engineers can thus unerringly identify the leaking sound and then determine the position of the leak by use of the metre counter.

Should further a combination detector LD6000 be available, frequencies can additionally be visualized and potential points of leakage can be indicated in form of a bar graph. Moreover, the application of an LD6000 enables the data recording of long-term measurements.

The LD6000PTS provides a variety of mounting options of the push cable pressure lock for flexible insertion via:

  • Domestic water meter,
  • Free-flow valve,
  • Dismantled piping,
  • Tapping saddle,
  • Hydrants.
The connection of the tube probe with the combination detector LD6000 is no problem and constitutes the perfect visual addition for acoustic leak detection. Furthermore, the LD6000 can be used to record long-term measurements.
Combination detector LD6000
Required for wireless connection of the tube probe to the LD6000 is the optionally available Bluetooth receiver LD6000PTS.
LD6000 PTS Bluetooth receiver

Simple pipe and pinpoint location

Furthermore, a frequency generator can be connected to the LD6000PTS to contact the entire push cable or the probe tip.

Then the course of the pipeline or the point of leakage can be detected using a receiver.

A suitable combination of transmitter and receiver is e.g. pipe detector SR-24 with transmitter ST-510.

Alternatively, other commercially available transmitters and receivers operating in the 33-kHz range can be used.

The LD6000PTS impresses with sophisticated features:

Steel pipe frame with Polykat push cable
Powder-coated steel pipe frame with push cable made of Polykat fibreglass with integrated stranded copper wires
Bluetooth transmitter with connection option for a frequency generator
Bluetooth transmitter with connection option for a frequency generator
Flexible sensor head with precision microphone
Flexible sensor head with precision microphone
Push cable locking mechanism
Switch lever for push cable fixation
Storage container for disinfectant
Storage container for disinfectant
Transport holding fixture for storage container
Transport holding fixture for storage container
Mechanical metre counter for length measurement
Mechanical metre counter for length measurement
Pressure-resistant cable passage
Pressure-resistant cable passage

Available in four different lengths from 50 to 150 metres

To ensure that you have the optimum tube probe for every requirement, the LD6000PTS is available with a push cable of 80, 100 or 150 metres in addition to the standard 50-metre version.

While the 50 m push cable version of the LD6000PTS has a highly flexible, rubber-coated sensor head with guide ball (A), the 80, 100 and 150 m versions are equipped with a steel-braided sensor head (B).

A matching service case is optionally available for each version – ready for use and equipped with practical accessories and a holder for the Bluetooth headphones included in the standard scope of delivery.

LD6000PTS in 80-, 100- or 150-metre version with steel braided sensor head
A matching service case is optionally available for each version – equipped ready for use (example illustration)
50-metre version LD6000PTS with rubber-coated sensor head

A few practical benefits:

  • Pinpoint acoustic leak detection directly in the pressurized water line
  • Enables the pinpoint location of the probe tip and route location of the push cable for plastic pipe course detection
  • No manipulation by environmental sounds
  • Wireless sound transmission via Bluetooth
  • Integrated metre counter
LD6000PTS accessories

Accessories contained in the scope of delivery:

  1. Bluetooth headphones

Optionally available accessories:

  1. LD6000PTS Bluetooth receiver
  2. Service case (example illustration), ready for use and equipped with the following accessories:
  3. Disinfectant
  4. Hose adapter
  5. GEKA couplings 1 inch internal thread and 1 inch external thread
  6. USB charging cable for headphones
  7. Car charging adapter
  • 1 pair of protective gloves

LD6000PTS-50

Akustische Rohrsonde LD6000 PTS 50 m show in Trotec online shop
Technical data
General information
  Article number 3.110.008.035
Sound
  Measuring principle Piezoceramic
  Min. measuring range [Hz] 10
  Max. measuring range [Hz] 16,000
Display
  10-stage LED bargraph
Interfaces
  Bluetooth
  Banana jack
Bluetooth
  Type Bluetooth 2.0
  Range [m] 10 m
Device control
  Membrane keyboard
Push cable
  Durchmesser [mm] 4.5
  Länge [m] 50
  Biegeradius, minimal [mm] 100
  Gewicht [kg] 10
  Bruchkraft [kN] 40
Mikrofonsonde
  Durchmesser [mm] 10
  Länge [mm] 90
  Durchmesser Kugelkopf [mm] 12
  Biegeradius, minimal [mm] 40
  Frequenzbereich [Hz] 10 - 16.000
  Ortungstiefe max. [m] 3.5
  Type of protection IP68
Kabelschleuse mit Desinfektionsvorrichtung
  Druckfestigkeit [bar] 16
Housing design
  Plastic/metal
Type of protection
  IP68 - (sensor)
  IP66 - (BT transmitter)
Ambient conditions
  Operation - min. temperature [°C] 0
  Operation - max. temperature [°C] 80
Operating time
  > 12 h
Power supply
  Internal (battery)
  Battery type 1x 9V battery
Dimensions
  Length (packaging excluded) [mm] 160
  Height (packaging excluded) [mm] 569
  Diameter (packaging excluded) [mm] 400
Weight
  (packaging excluded) [kg] 17
Standard scope of delivery
Standard scope of delivery
  Measuring device
  Bluetooth headphones
  USB cable
  Battery(-ies)
  Operating manual
  Sound-protected headphones
  Transport case
  Mini earphones
  Software LogControl
  Software CorControl
  Signal pick-up for correlation transmitter
  Correlator transmitter 1, yellow
  Correlator transmitter 2, red
  Notebook for laptop correlator
  Charger
Ascertainable measured values and functions
Internal sensors
  Sound [digits]
Functions and features
  akustische Leckortung in mit nicht aggressiven Flüssigkeiten und unter Druck befüllten Rohrleitungen
  wasserdicht nach Schutzart IP68 (Sonde)
  10-fach LED-Display an Bluetooth-Modul
  Bluetooth
  Robuste Bauweise
  Cordless battery operation
  Battery status indication

 standard equipment

 optionally available

 not available

LD6000PTS-80

Akustische Rohrsonde LD6000 PTS 80 m show in Trotec online shop
Technical data
General information
  Article number 3.110.008.037
Sound
  Measuring principle piezokeramisch
  Min. measuring range [Hz] 10
  Max. measuring range [Hz] 16,000
Display
  10-stage LED bargraph
Interfaces
  Bluetooth
  Banana jack
Bluetooth
  Type Bluetooth 2.0
  Range [m] 10 m
Device control
  Membrane keyboard
Push cable
  Durchmesser [mm] 4.5
  Länge [m] 80
  Biegeradius, minimal [mm] 100
  Gewicht [kg] 15
  Bruchkraft [kN] 40
Mikrofonsonde
  Durchmesser [mm] 12
  Länge [mm] 120
  Biegeradius, minimal [mm] 60
  Frequenzbereich [Hz] 10 - 16.000
  Ortungstiefe max. [m] 3.5
  Type of protection IP68
Kabelschleuse mit Desinfektionsvorrichtung
  Druckfestigkeit [bar] 16
Housing design
  Plastic/metal
Ambient conditions
  Operation - min. temperature [°C] 0
  Operation - max. temperature [°C] 80
Power supply
  Internal (battery)
  Battery type 1x 9V-Blockbatterie
Dimensions
  Length (packaging excluded) [mm] 160
  Height (packaging excluded) [mm] 569
  Diameter (packaging excluded) [mm] 400
Weight
  (packaging excluded) [kg] 22
Standard scope of delivery
Standard scope of delivery
  Measuring device
  Bluetooth headphones
  USB cable
  Battery(-ies)
  Operating manual
Ascertainable measured values and functions
Functions and features
  akustische Leckortung in mit nicht aggressiven Flüssigkeiten und unter Druck befüllten Rohrleitungen
  wasserdicht nach Schutzart IP68 (Sonde)
  10-fach LED-Display an Bluetooth-Modul
  Bluetooth
  Robuste Bauweise
  Cordless battery operation
  Battery status indication

 standard equipment

 optionally available

 not available

LD6000PTS-100

Akustische Rohrsonde LD6000 PTS 100 m show in Trotec online shop
Technical data
General information
  Article number 3.110.008.038
Sound
  Measuring principle piezokeramisch
  Min. measuring range [Hz] 10
  Max. measuring range [Hz] 16,000
Display
  10-stage LED bargraph
Interfaces
  Bluetooth
  Banana jack
Bluetooth
  Type Bluetooth 2.0
  Range [m] 10 m
Device control
  Membrane keyboard
Push cable
  Durchmesser [mm] 9
  Länge [m] 100
  Biegeradius, minimal [mm] 240
  Gewicht [kg] 20
  Bruchkraft [kN] 40
Mikrofonsonde
  Durchmesser [mm] 20
  Länge [mm] 140
  Biegeradius, minimal [mm] 100
  Frequenzbereich [Hz] 10 - 16.000
  Ortungstiefe max. [m] 3.5
  Type of protection IP68
Kabelschleuse mit Desinfektionsvorrichtung
  Druckfestigkeit [bar] 10
Housing design
  Plastic/metal
Type of protection
  IP68 - (sensor)
  IP66 - (BT transmitter)
Ambient conditions
  Operation - min. temperature [°C] 0
  Operation - max. temperature [°C] 80
Operating time
  > 12 h
Power supply
  Internal (battery)
  Battery type 1x 9V-Blockbatterie
Dimensions
  Length (packaging excluded) [mm] 380
  Height (packaging excluded) [mm] 830
  Diameter (packaging excluded) [mm] 780
Weight
  (packaging excluded) [kg] 27
Standard scope of delivery
Standard scope of delivery
  Measuring device
  Bluetooth headphones
  USB cable
  Battery(-ies)
  Operating manual
Ascertainable measured values and functions
Functions and features
  akustische Leckortung in mit nicht aggressiven Flüssigkeiten und unter Druck befüllten Rohrleitungen
  wasserdicht nach Schutzart IP68 (Sonde)
  10-fach LED-Display an Bluetooth-Modul
  Bluetooth
  Robuste Bauweise
  Cordless battery operation
  Battery status indication

 standard equipment

 optionally available

 not available

LD6000PTS-150

Akustische Rohrsonde LD6000 PTS 150 m show in Trotec online shop
Technical data
General information
  Article number 3.110.008.039
Sound
  Measuring principle piezokeramisch
  Min. measuring range [Hz] 10
  Max. measuring range [Hz] 16,000
Display
  10-stage LED bargraph
Interfaces
  Bluetooth
  Banana jack
Bluetooth
  Type Bluetooth 2.0
  Range [m] 10 m
Device control
  Membrane keyboard
Push cable
  Durchmesser [mm] 9
  Länge [m] 150
  Biegeradius, minimal [mm] 240
  Gewicht [kg] 30
  Bruchkraft [kN] 40
Mikrofonsonde
  Durchmesser [mm] 20
  Länge [mm] 140
  Biegeradius, minimal [mm] 100
  Frequenzbereich [Hz] 10 - 16.000
  Ortungstiefe max. [m] 3.5
  Type of protection IP68
Kabelschleuse mit Desinfektionsvorrichtung
  Druckfestigkeit [bar] 10
Housing design
  Plastic/metal
Type of protection
  IP68 - (sensor)
  IP66 - (BT transmitter)
Ambient conditions
  Operation - min. temperature [°C] 0
  Operation - max. temperature [°C] 80
Operating time
  > 12 h
Power supply
  Internal (battery)
  Battery type 1x 9V-Blockbatterie
Dimensions
  Length (packaging excluded) [mm] 380
  Height (packaging excluded) [mm] 830
  Diameter (packaging excluded) [mm] 780
Weight
  (packaging excluded) [kg] 37
Standard scope of delivery
Standard scope of delivery
  Battery(-ies)
Ascertainable measured values and functions
Functions and features
  akustische Leckortung in mit nicht aggressiven Flüssigkeiten und unter Druck befüllten Rohrleitungen
  wasserdicht nach Schutzart IP68 (Sonde)
  10-fach LED-Display an Bluetooth-Modul
  Bluetooth
  Robuste Bauweise
  Cordless battery operation
  Battery status indication

 standard equipment

 optionally available

 not available

Accessories

Loading...

Downloads

Loading...