Data logger DL200X
Universally applicable industrial data logger
The DL200X is the perfect data collector for various monitoring tasks in automation, control and feedback control systems.
Whether particle concentration, pressure, conveyor speed or flow rate, the DL200X can be configured for any requirement you may have, because instead of relying on internal sensors, it uses external connections for digital and analogue sensors.
Using an RS485 interface, up to four intelligent bus sensors can be built in, for example, particle counters or temperature-dampness sensors for cleanrooms.
Additionally, the DL200X has a 10 pin terminal, which two other analogue sensors can be attached to, for example, Pt100 temperature sensors, thermal elements (K, J, S type) or voltage and current sensors with the standardised signal for individual measurement transducer in various physical sizes and units.
At maximum configuration, six different sensors can run at the DL200X simultaneously, while universal measuring networks can operate in real time due to the device's LAN capability.
Definition of measurement channel – How many measured values can be recorded?
All devices from the DL series are powerful multi-channel data loggers with which you can not only detect, but also record all of the compatible measured values (see technical specifications).
The term "measurement channel" is not used to mean the same as it is by some of our competitors – meaning the available sensors, but instead – the same as in analysis software – it means one individually selectable "recording track", i.e. the value which should be logged.
For each measured value and measured unit (channel group), one or more of the four following types of measured values can be recorded: current, minimum, maximum or average. Each of these four values represents a measurement channel.
The maximum amount of available measurement channels for each data logger is thus the amount of detectable channel groups (e.g. temperature in °C) multiplied by the four types of measured values.
In total, 20 of these measurement channels can be freely selected for logging and three for being displayed.
Many measurement channels –
many possibilities...
The data logger can detect up to 32 measurement channel groups of the most varied sensor signals. Then, it can record an individually configurable composition of measured values from up to 20 separate measurement channels in freely selected intervals.
Due to the wide range of possible applications, the instruments are perfectly suited for monitoring the environment of buildings, controlling climate sensitive production processes and storage conditions or even providing evidence when required.
The devices are fitted with LAN and USB interfaces by default to offer a quick transfer of data.
Pro software for configuring
and managing measured data
Each measuring device comes with pro software, which can be used to simultaneously read as many data loggers as the user likes – and when using LAN, they don't even need to be nearby.
In addition to the comfortable option for administering and configuring various data loggers, the software can also be used to create reports or to export recorded measured data for archiving.
Up to six external measured value sensors can be connected:
One to four digital bus sensors can be connected to the data logger via the 5-pin round connector M12 ➊ – e.g. sensor type TS920 ➋ – and installed in a long line of up to 150 metres using Y-connectors ➌ and extension cables ❹.
One or two analogue sensors with current and voltage output, Pt100 temperature sensors in 3- and 4-cable technology or thermal elements can be connected to the 10-pin terminal ❺ with two independent input channels.
| Technical data of the external TS920 temperature and dampness sensor | ||
| for use with data logger model | DL200X | |
| Temperature | Measuring range | -40 °C to +80 °C |
| Accuracy | ± 0.1 °C (20 °C), ± 0.3 °C (-10 °C ... +50 °C), otherwise < 0.5 °C | |
| Dew point temperature | Measuring range | -40 °C to +80 °C |
| Relative Humidity |
Measuring range | 0 ... 100 % |
| Accuracy | ± 2 % RH (0 ... 90 % RH), ± 3 % RH (0 ... 100 % RH) | |
| Absolute humidity | Measuring range | 0 ... 300 g/m³ |
| Mixing ratio | Measuring range | 0 ... 550 g/kg |
| Optionally available accessories | Stainless steel sinter cap (article no. 3.510.200.211), Y-connector (article no. 3.510.260.310),
extension cable in either 2 m, 10 m or 25 m lengths |
|
Pro software for configuring and managing measured data
Using the software included in the scope of delivery, all DL data loggers can conveniently be set up or configured for network operation. The measured data can simultaneously be read, analysed and exported by all data loggers – using LAN also from remote installation sites.
Now upgrade the standard software with the options MultiMeasure Studio Professional has to offer.
Since all DL models are fully compatible with this, the software is not only perfectly suited for the analysis of all measured data, but can also be used to calculate the dew point temperature or absolute humidity in retrospect, if it wasn't recorded already.
Finally one software for basically all measuring devices
Even owners of partially compatible or isolated measuring instruments can benefit from MultiMeasure Studio Professional: This software enables the analysis and administration of all measuring projects and customer data across multiple devices in a single application!
Using the unique report generating function you can create professional measurement reports in a trice:
Numerous boilerplate texts for building diagnostics, moisture measurement, leak detection and thermography are already included completely formulated.
All information about the "MultiMeasure Studio Professional" can be found here...
Practical benefits
- Maintenance-free measuring device "made in Germany"
- Tamper-proof measured value detection and documentation
- Perfect for measuring over a long period
- Storage space for up to 3,200,000 measured values
- Simultaneous recording by up to 20 separate measurement channels
- Network function
- Low energy consumption
- Flexible power supply via battery or USB
- Timer function, variable measurement intervals, alarm function for each measurement channel
- Three-row LCD for measurement value display
- Including pro software
Buy
DL200X Professional Data Logger Anthracite
The DL200X is an optimal data collector for a wide range of monitoring tasks in automation, control and control technology.
485.89 £ incl. VAT Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 3.510.260.060 | |
| Air temperature [°C] | ||
| Measuring principle | Air temperature | ||
| Min. measuring range | Air temperature [°C] | ||
| Max. measuring range | Air temperature [°C] | ||
| Accuracy ± | Air temperature [°C] | ||
| Display resolution [°C] | ||
| Relative humidity | ||
| Measuring principle | Relative humidity | ||
| Min. measuring range [% r.F.] | ||
| Max. measuring range [% r.F.] | ||
| Accuracy [% r.F.] | ||
| Display resolution [% r.f.] | ||
| Air pressure | ||
| measuring principle | ||
| Measuring range [hPa] | ||
| Accuracy ± [hPa] | ||
| Display resolution [hPa] | ||
| CO2 concentration | ||
| Measuring principle | ||
| Measuring range [ppm] | ||
| Display resolution [ppm] | ||
| Accuracy | ||
| Long-term stability [ppm/a] | ||
| Thermal element K | ||
| Min. measuring range [°C] | -200 | |
| Max. measuring range | Thermal element K [°C] | 1,200 | |
| Accuracy Between -200 °C ... 0 °C [°C] | ±1 | |
| Accuracy Between -200 °C ... 0 °C [°C] - Of measured value | ±0.5 | |
| Accuracy Between 0 °C ... 1.200 °C [°C] | ±0 | |
| Accuracy Accuracy between 0 °C ... 1.200 °C [°C] - Of measured value | ±0.2 | |
| Resolution | Thermal element K [°C] | 0.2 | |
| Thermal element J | ||
| Min. measuring range [°C] | -200 | |
| Max. measuring range [°C] | 1,200 | |
| Accuracy -200 °C ... 0 °C [°C] | ±1 | |
| Accuracy -200 °C ... 0 °C [°C] - Of measured value | ±0.5 | |
| Accuracy Accuracy between 0 °C ... 1.200 °C [°C] | ±1 | |
| Accuracy Accuracy between 0 °C ... 1.200 °C [°C] - Of measured value | ±0.2 | |
| Resolution | Thermal element J [°C] | 0.2 | |
| Thermal element S | ||
| Min. measuring range [°C] | -50 | |
| Max. measuring range [°C] | 1,700 | |
| Accuracy Between -50 °C ... 0 °C [°C] | ±1 | |
| Accuracy Between -50 °C ... 0 °C [°C] - Of measured value | 0.5 | |
| Accuracy 0 °C ... 1.700 °C [°C] | ±1 | |
| Accuracy 0 °C ... 1.700 °C [°C] - Of measured value | ±0.2 | |
| Resolution | Thermal element S [°C] | 0.2 | |
| PT100 | ||
| Min measuring range [°C] | -200 | |
| Max. measuring range [°C] | 500 | |
| Accuracy [°C] | 0.2 | |
| Accuracy of the measured value ± | Pt100 [%] | 1 | |
| Resolution | Pt100 [°C] | 0.02 | |
| Voltage input | ||
| Min. measuring range [V] | 0 | |
| Max. measuring range [V] | 1 | |
| Accuracy ± [µV] | 200 | |
| Accuracy of the measured value - Voltage input ± [%] | 1 | |
| Resolution | < 500 | |
| Current measurement | ||
| Min. measuring range in two-wire operation [mA] | 4 | |
| Max. measuring range in two-wire operation [mA] | 20 | |
| Min. measuring range in three-wire operation [mA] | 0 | |
| Max. measuring range in three-wire operation [mA] | 20 | |
| Accuracy ± [µA] | 4 | |
| Accuracy of the measured value ± | Current measurement [%] | 0.1 | |
| Resolution [µA] | 5 | |
| Approx. output load [Ω] | 50 | |
| Display | ||
| LCD | ||
| Size [mm] | 90 x 64 | |
| Memory organisation | ||
| Sampling interval | 10/30 s, 1/10/12/15/30 min, 1/3/6/12/24 h | |
| Saving interval | 1/10/12/15/30 min, 1/3/6/12/24 h | |
| Memory | 16 MB, 3,200,000 measured values | |
| Data logging | Up to 20 measurement channels in parallel | |
| Available measurement channels | Max. 128 | |
| Available channel groups | Max. 32 | |
| Software | TR, EN, EN, ES, FR | |
| Interface | ||
| LAN | ||
| RS-485 | ||
| 10-pin terminal | ||
| USB | ||
| BNC | ||
| Plug socket | ||
| Housing design | ||
| Plastics | ||
| Power supply | ||
| Internal (battery) | 4 x 1.5 V, AA, operating time > 1 year (depending on sensor and configuration) | |
| External (USB) | ||
| External (LAN, PoE model) | ||
| Terminals for external power supply to supply the sensor | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 166 | |
| Width (packaging excluded) [mm] | 32 | |
| Height (packaging excluded) [mm] | 78 | |
| Weight | ||
| (packaging excluded) [kg] | 0.25 | |
| Standard scope of delivery | ||
|---|---|---|
| Standard scope of delivery | ||
| Measuring device | ||
| Battery(-ies) | ||
| USB connection cable | ||
| CD-ROM with Smartgraph PC software and operating manual | ||
| Ascertainable measured values and functions | ||
|---|---|---|
| Internal sensors | ||
| Air temperature [°C] | ||
| Air temperature [°F] | ||
| Relative humidity [%] | ||
| Absolute humidity [g/m³] | ||
| Dew point temperature [°C] | ||
| Dew point temperature [°F] | ||
| Relative air pressure [hPa] | ||
| Absolute air pressure [hPa] | ||
| CO2 concentration [ppm] | ||
| External sensors | ||
| CO2 concentration [ppm] | ||
| Surface temperature [°C] | ||
| Surface temperature [°F] | ||
| Material temperature [°C] | ||
| Material temperature [°F] | ||
| Air temperature [°C] | ||
| Air temperature [°F] | ||
| Wood moisture [digits] | ||
| Building moisture [digits] | ||
| Relative humidity [%] | ||
| Absolute humidity [g/m³] | ||
| Dew point temperature [°C] | ||
| Dew point temperature [°F] | ||
| Battery voltage [mV, V] | ||
| Voltage [mV, V] | ||
| Current [mA, A] | ||
| Absolute air pressure [hPa, Pa] | ||
| Relative air pressure [hPa, Pa] | ||
| Differential pressure [Pa] | ||
| Flow rate [m/s] | ||
| Mixing ratio [g/kg dry air] | ||
| Particle concentration [0.1 µm] | ||
| Particle concentration [0.2 µm] | ||
| Particle concentration [0.3 µm] | ||
| Particle concentration [0.5 µm] | ||
| Particle concentration [1 µm] | ||
| Particle concentration [5] | ||
| Particle concentration [10] | ||
| Particle concentration [x µm] | ||
| Particle concentration [y µm] | ||
| Particle concentration [z µm] | ||
| Unknown | ||
| inactive | ||
| Wet-bulb temperature [°C] | ||
| Wet-bulb temperature [°F] | ||
| Global radiation [W/m²] | ||
| Daylight | ||
| Amount of precipitation [l/m²] | ||
| Wind speed [m/s] | ||
| Wind direction | ||
| Ground dampness | ||
| Leaf wetness | ||
standard equipment
optionally available
not available