BE15 voltage detector

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Measuring devices
  3. Electricity
  4. Voltage detectors
  5. BE15 voltage detector

BE15 voltage detector

Non-contact voltage detection with two sensitivity levels

Not only the compact pen-shaped design with pocket clip makes the BE15 voltage detector a trusted partner to be kept close by any craftsman and do-it-yourselfer; the phasing tester permits a quick, non-contact detection of alternating voltages in two selectable sensitivity levels (200 V and 24 V).

Approaching a live conductor, such as a socket, switch or cable connection, with the switched on BE15, the measuring device detects and indicates this quickly and without contact based on a capacitive measurement method: The LED indicator integrated in the measuring tip turns from green to red and visually indicates "CAUTION: Hazardous voltage!". An acoustic warning signal is also emitted in addition.

Moreover, the BE15 also detects low voltages as can be officially required in certain areas such as in wet rooms. All it takes is for you to press the switch-over button and the colour change of the LED indicator from green to orange indicates that the higher 24 V sensitivity level has been activated. The warnings when approaching a live conductor are consistent with the procedure described above.

The LED lamp integrated at the clip end permits an optimum illumination of dark inspection areas and so enables safe and precise working without tiring despite unfavourable lighting conditions. The convenient power button permits a full deactivation of the measuring device BE15 in order to save energy during periods of non-use.

A few practical benefits:

  • Quick and non-contact detection of alternating voltages
  • Multi-coloured LED indicator integrated in the measuring tip (green: OK, red: CAUTION! Hazardous voltage!, orange (instead of green): switch-over to higher sensitivity level (24 V) active)
  • To sensitivity levels can be selected (200 V; 24 V)
  • Visual and acoustic alarm when voltage is present
  • Power button for full deactivation of the device when not in use (energy saving mode)
  • Compact design in pen shape with pocket clip
  • Integrated LED lamp for operation in unfavourable lighting conditions
  • Optimum value-for-money ratio
Using the integrated LED torch of the BE15 you can optimally illuminate dark measuring areas.
BE15 – used as torch
The red LED is illuminated as soon as there is voltage present in the measuring tip's localization range. If no voltage is present, the green LED is illuminated.
BE15 – used for power cables
Front view of the BE15
BE15 voltage detector
Side view of the BE15
BE15 voltage detector
Measuring tip of the BE15
BE15 voltage detector
Torch of the BE15
BE15 voltage detector
The compact BE15 lies comfortably in the hand
BE15 voltage detector


BE15 Voltage Detector show in Trotec online shop

BE15 Voltage Detector

The non-contact phase tester allows you to quickly localize all live conductors. So it is possible, for example, to detect wire breaks in open cables of cable drums on the building or the fairy lights on own window.

You save: 17 %

12.47 £ 10.28 £ incl. VAT Show net price (VAT not included)


Technical data

Technical data
General information
  Article number 3.510.205.216
AC voltage [V/AC]
  Min. measuring range | AC voltage [V] 24
  Max. measuring range | AC voltage [V] 1,000
Housing design
Measuring category
  CAT III (1,000 V)
  CAT IV (600 V)
  EN 61.326
  EN 61010-1
  EN 61010-2-033
  Degree of pollution 2
Power supply
  Internal (battery)
  Battery type 2 x 1.5 V, AAA
Ambient conditions
  Operation - min. temperature [°C] 0
  Operation - max. temperature [°C] 40
  Max. humidity range [% r.F.] 80
  Length (packaging excluded) [mm] 158
  Width (packaging excluded) [mm] 21
  Height (packaging excluded) [mm] 25
  (packaging excluded) [kg] 0.048
Standard scope of delivery
Standard scope of delivery
  Measuring device
  Operating manual
  Transport bag
  One pair of measuring cables (banana)
  Contact temperature sensor type K
Ascertainable measured values and functions
Functions and features
  Non-contact AC voltage detection (without galvanic contact)
  Acoustic alarm
  Visual alarm
  Integrated torch
  Continuity test
  Diode testing
  Measured value hold function
  Maximal value display
  Automatic measuring range selection
  Display illumination
  Automatic switch-off
  Contact temperature measurement with type K contact sensor
  Automatic battery test
  Duty cycle
  Acoustic continuity check
  Visual continuity check
  Polarity test
  Phase sequence indicator
  Unipolar phase testing
  Integrated digital clock
  Calendar function / date display
  Programmable electricity tariffs
  Consumption indication as active power in watts
  Consumption indication as scale of charges in cents
  Recording mode for long-term measurements

 standard equipment

 optionally available

 not available



Alternative products