Peltier dehumidifiers TTP 1 E / TTP 2 E
Ideal drying solution with timeless design
High degree of flexibility due to extra-small construction
Using the ultra-compact Peltier dehumidifiers TTP 1 E and TTP 2 E you can achieve impressive results on restricted space. They only take up about 2/3 of the room of a customary shoe box – but come equipped with an innovative thermoelectric technology promising dry conditions at all times. Mini dehumidifiers get rid of moist, musty room air and allow you to breathe with relish.
Special features:
- Simple dehumidification operation
- Particularly easy handling
- Ultra-silent operation
- Energy-efficient thanks to low power consumption
We help you find the suitable dehumidifier that meets your requirements!
With our product finder you can quickly and easily choose the ideal dehumidifier for your application scenario.
Click here to go directly to the product finder
PRODUCT BROCHURE
Moisture in the bathroom, basement or bedroom can lead to mold. All relevant information about our comfort dehumidifiers can also be found in the product brochure. Download the PDF directly here.
For keeping rooms that are difficult to ventilate, e.g. walk-in closets, windowless bathrooms or pantries, dry
By the way, the two mini dehumidifiers' only distinguishing feature is their colour scheme – in terms of technology they are structurally identical and with a dehumidification performance of about 220 ml per day keep smaller rooms of up to 5 m² reliably dry. The unpretentious, elegant design blends in with any living or working environment. Owing to their particular compactness the TTP devices are excellently suited for use in closets, shoe cabinets or pantries or in some cases also in small, windowless bathrooms without much ingress of moisture. These sensitive humid spots are however precisely where the dehumidifiers are optimally positioned: they remove excess moisture from the air, reduce condensation and so prevent mould growth.
Thanks to the Peltier element the operation of these energy-efficient devices is also ultra-silent, so there should be nothing to disturb a good night's sleep. Moreover, both TTP devices can score with simple handling characteristics during dehumidification: just plug the device in and switch it on – that's it! An LED indicates the operating status of the device and whether the water tank needs to be emptied. Each device continues to run until a sensor detects that the 500 ml water tank capacity has reached its limit, then the device will be switched off automatically. As soon as the collection container has been drained, operation is automatically resumed. Owing to the integrated air purification function the TTP 1 E / TTP 2 E filters animal hair, fluff and dust from the air.
All TTK dehumidifiers in direct comparison:
To find the dehumidifier which exactly meets your requirements, please consult the concise overview of all TTK dehumidifiers from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits
- For keeping rooms that are difficult to ventilate, e.g. walk-in closets, windowless bathrooms or pantries, dry
- High degree of flexibility due to extra-small construction
- Modern thermoelectric Peltier element (without compressor and refrigerant)
- Air purification function – filters animal hair, fluff and dust
- Filling level warning light to indicate a full
- Water tank
- Overflow protection with automatic switch-off
- Appealing, compact design
- With transparent water collection container
- Power indicator light
Trotec's guidebook providing practical knowledge on semiconductor dehumidifiers
What can such dehumidifiers achieve – and what's not possible?
Peltier dehumidifiers, often also referred to as semiconductor, electric or mini dehumidifiers, are sensible solutions for clearly outlined areas of application. No more, but also no less – even if they are sometimes advertised elsewhere as veritable miracles making the use of compressor devices completely obsolete in many areas.
With our guidebook "Practical knowledge on semiconductor dehumidifiers", we would like to provide serious facts about such praised Peltier products so that you can inform yourself objectively before making a purchase.
Come and see for yourself – go to Trotec's guidebook "Practical knowledge on semiconductor dehumidifiers" ...
Here is how condenser dryers with Peltier technology work
A cold surface must be generated within this type of dehumidifier as well. The temperature of this surface must lie below the dew point of the air so that water can condense on it. This is achieved by the eponymous Peltier element: a compact, thermoelectric converter that – when electricity flows – causes one element side to become very hot and the other very cold.
A blower now sucks in the room air and guides it past the cold side of the Peltier element. There the air cools down to below dew point, the moisture condenses and drips into a collection container. The dry air is then guided past the hot element side, where it absorbs the heat and flows back into the room as warm, dry air.
Save electricity and money on dehumidification
With our socket hygrostat BH30 you can additionally save money when dehumidifying damp rooms or keeping rooms dry. The programmable switch is simply plugged in between the dehumidifier and socket to regulate the dehumidification process based on the measured humidity level.
Once the desired target humidity is reached, the hygrostat disconnects the device from the mains until dehumidification is required again. By switching off the compressor and fan during standby times, the device's energy consumption is noticeably reduced.
The initial acquisition costs of the BH30 will have been amortized in a minimum of time.
Moreover, many dehumidifiers only offer rough target value setting for optimum humidity. The hygrostat BH30 allows the room humidity level to be adjusted in increments of 1 % from 20 % to 90 % and thus offers significantly more precise target humidity selection.
standard equipment
optionally available
not available
Buy
Peltier-Luftentfeuchter TTP 1 E
You save: 50 %
49.99 €
24.99 €
incl. VAT
Show net price (VAT not included)
Peltier-Luftentfeuchter TTP 2 E
You save: 50 %
49.99 €
24.99 €
incl. VAT
Show net price (VAT not included)
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 1.105.000.001 | |
Dehumidification performance | ||
Max. [l/24h] | 0.22 | |
Max. dehumidification performance [l/24h] | 0.22 | |
Recommended room size dry keeping | ||
m³ | 12.5 | |
m² | 5 | |
Suitable for drying rooms | ||
Suitable for keeping dry | ||
Ambient conditions | ||
Min. temperature range [°C] | 16 | |
Max. temperature range [°C] | 35 | |
Min. humidity range [% RH] | 45 | |
Protection class | II | |
Electrical values | ||
Mains connection | 100 - 240 V, 50/60 Hz | |
Nominal current consumption [A] | 0.6 | |
Power input [kW] | 0.02 | |
Electric connection | ||
Connection plug | CEE 7/16 | |
Cable length [m] | 1.4 | |
Water tank | ||
Contents in [l] | 0.5 | |
Sound values | ||
Distance 1 m [dB(A)] | 35 | |
Dimensions | ||
Length (packaging excluded) [mm] | 95 | |
Width (packaging excluded) [mm] | 150 | |
Height (packaging excluded) [mm] | 220 | |
Weight | ||
(packaging excluded) [kg] | 1 |
Equipment, features and functions | ||
---|---|---|
Fan | ||
axial | ||
stages | 1 | |
Condensate tank monitoring | ||
Container available | ||
Filling level warning light to indicate a full water tank | ||
Overflow protection with automatic switch-off | ||
Functions and features | ||
LED indication in case of a defective mains plug | ||
Auto restart function | ||
Mobility | ||
portable | ||
Condensate drain | ||
Possible | ||
Control panel | ||
On/off switch (LED illuminated) | ||
Housing design | ||
Plastics |
standard equipment
optionally available
not available