Oil heater fan IDE 50
  1. Products & Services
  2. Products ‑ HomeComfort
  3. Heating
  4. Oil heater fans of the IDE series
  5. IDE 50

Oil heater fan IDE 50

The indirectly fired oil heater fan IDE 50 provides clean and dry hot air

Oil heater fan IDE 50
Oil heater fan IDE 50
Oil heater fan IDE 50

Indirectly fired air heaters such as the oil heater fan IDE 50 are an ideal solution to provide large amounts of clean and dry hot air, as is required for the heating of construction sites, marquees, exhibition halls, workshops or stables.

Longer outdoor applications are no problem for the oil heater fan IDE 50, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank.

When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.

A thermostat with digital dual display for actual and nominal value is permanently installed for temperature control; in addition, an external thermostat with a 25-metre connection cable can optionally also be supplied in case the oil heater fan is to be positioned away from the area to be heated.

The firing of the IDE 50 can variably be realized with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.

IDE indirect oil heaters – maximum heating power, clean warmth

The indirect oil heaters of the IDE series are ideally suited for rooms in which ventilation is only possible to a certain extent, but which still are to be used by people and animals. They are also a good choice for speeding up construction drying as well as in rooms where there is a fire hazard due to combustible substances.

In case of indirect heaters, the air to be heated is completely isolated from the combustion chamber.

The air is heated while flowing past the enlarged area of the combustion chamber, the heat exchanger. To be sure, the fan blowing out warm air also provides the required combustion air, but the combustion products are led away into the open air through a chimney.

Thus, in order to obtain both clean and dry warmth, we recommend using an indirect heater.

Unlike direct heaters, they do not emit any combustion products or water vapour into the room air, provided that the optionally available flue gas discharge is used.

Schematic diagram indirect heaters

Special equipment features

The temperature can be adjusted as required via a stepless thermostat control. An additional dual display informs you of the nominal and actual value.
Electronic thermostat
The IDE 50 comes equipped with a readily accessible external fuel filter. The filling level of the integrated fuel tank can be checked anytime via the standard liquid level indication.
Fuel filter and tank filling level indicator
To ensure constant firing of the stainless steel combustion chamber, the fuel supply of many IDE devices is effected by means of a high-quality Danfoss® injection pump.
Oil heater fan IDE 50
The oil heater fan IDE 50 is equipped with a connection for an external thermostat if the temperature is to be measured and controlled at a location to be heated that is up to 25 metres away (a thermostat is optionally available).
Connection for an external thermostat
Instead of the stainless steel chimney, an optional flue pipe can also be connected to remove the combustion air.
Stainless steel chimney
The carriage accommodates two practical cable holders so that transport can be carried out safely and without trip hazards.
Cable holder
Continue directly to the practical knowledge guidebook for professional heating

Practical knowledge guidebook – heating know-how for professional users

Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.

Continue to the practical knowledge guidebook for professional heating


A few practical benefits:

  • Particularly economic solution for standard oil heating
  • Integrated fuel tank with filling level indication
  • Electronic flame trap
  • Overheating protection
  • Stainless steel combustion chamber
  • Integrated thermostat with dual display for actual and nominal value
  • Connection for external thermostat
  • Carriage for easy change of location
To the heating capacity calculator

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator


Technical data by comparison

All IDE oil heater fans in direct comparison:

To find the oil heater fan which exactly meets your requirements, please consult the concise overview of all oil heater fans of the IDE series from Trotec, which we’re providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison


Buy

IDE 50 Oil Fired Indirect Heater show in Trotec online shop

IDE 50 Oil Fired Indirect Heater

Oil fired indirect heater with an air flow rate of 2,000 m³/h, 50 kW heating performance and a maximum temperature increase of up to 62 °C. The IDE 50 oil fired heater has an integrated thermostat for better control of the heating performance.

1,321.82 £ incl. VAT Show net price (VAT not included)

buy

Technical data

Technical data
General information
  Article number 1.430.000.230
Functional principle
  Method of heating indirect
  Method of heating direct
Air flow rate
  Level Max. [m³/h] 2,000
Fan
  axial
  Radial
Nominal heat output
  Level Max. [kW] 50
  Level Max. [kcal] 44,100
Temperature increase
  Level Max. [°C] 95
Electrical values
  Mains connection 230 V/50 Hz
  Current consumption [A] 3.2
  Power input [kW] 0.9
  Heating capacity [kW] 50
Electric connection
  Connection plug CEE 7/7 (plug type F + E)
  Cable length [m] 1.2
Operation
  Internal thermostat
  Connection for external thermostat
  Temperature indication
  Overheating protection
Fuel feed
  Fuel feed Danfoss pump
Fuel filter
  Available
Oil consumption
  Level Max. [l/h] 4.8
Tank contents
  Content in [l] 68
Hose connection
  Diameter | Hose connection [mm] 400
Chimney connection
  Available
  Diameter | Chimney connection [mm] 150
Sound values
  Distance 1 m [dB(A)] 79
Suitable fuels
  Diesel
  EL fuel oil
  Low-sulphur EL fuel oil
  Kerosene
Dimensions
  Length (packaging excluded) [mm] 1,365
  Width (packaging excluded) [mm] 550
  Height (packaging excluded) [mm] 985
Weight
  (packaging excluded) [kg] 59
Equipment, features and functions
Mobility
  Carry/transport handle(s)
  Plastic wheels
  Rubber-tyred metal wheels
  Forklift
  Crane
  Non-marking full-rubber wheels
Housing design
  Steel

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Seminars

Downloads

Loading...