TCH 19 E
Home Comfort

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Machinery - HomeComfort
  3. Heating
  4. Convectors TCH-E series
  5. TCH 19 E

Convector TCH 19 E

Enjoy a steady flow of warm air

If your feet are cold despite a running central heating system or you would like your bathroom to be somewhat warmer than the rest of your home, the flexibly applicable electric heater TCH 19 E is the perfect solution. Just as ideal is the convector's application in the time between seasons outside the heating period and else in rooms that only require temporary heating such as a conservatory. The compact dimensions render the TCH 19 E smaller and less conspicuous than other models of the same performance class.

Simple operation

Simply connect the compact additional heater to a power outlet and switch it on. The rapid heater provides clean, odourless and noiseless warmth for any room in a trice. Even better: In otherwise unheated rooms such as basements, hobby rooms, holiday homes or your garage the convector can also be applied as a reliable frost monitor. 

The switch-on is simply achieved via flip switches, then the convector supplies direct heat through a large air outlet. Using the infinitely variable thermal control you can choose from three heating levels: 750 watts, 1,250 watts and 2,000 watts. This allows an individual adjustment of the heat intensity for your requirements.

A few practical benefits:

  • Heating capacity of up to 2,000 W for clean, non-condensing and odourless heat
  • Infinitely variable thermal control
  • Three heating levels (750 W, 1,250 W, 2,000 W)
  • Thermostat-controlled automatic operation
  • Frost monitor function
  • Energy-efficient operation thanks to automatic switch-off upon reaching the set value
  • Overheating protection
  • Noiseless heating
  • Secure footing due to large feet

Energy-efficient feel-good warmth

Once the desired room temperature is reached, the electric heating element automatically switches itself off. And falling below the threshold value causes it to be switched back on. The convenient function saves both money and energy. The continuous warm air current is regulated by an integrated thermostat that further prevents the convector from overheating. 

The rapid heater TCH 19 E is an ideal match if you want a device that can heat rooms discreetly from one side through long, slanted warm air outlets. For convenient transportation and quick site changes the compact convector weighing only about 2 kg comes with practical recessed handles.

Tip: Should you prefer to heat the room from a central position, the model TCH 18 E – virtually identical in design and functioning – will be the perfect choice for you. TCH 18 E

Even convection heat

The air inside the convectors of the TCH series is warmed up by electrically heated wires and thus rises as warm air, which creates a natural suction that makes cold room air flow into the device. This leads to a permanent circulation of warm air reaching all corners of the entire room. The heat distributes evenly and an excessive or insufficient heating of individual areas is prevented. Once the preset degree of heat is reached, this energy-efficient device switches off automatically and only switches back on when falling below.

The TCH 19 E impresses with many practice-oriented details:

Multi-stage operating switch with integrated operating control lamp, three heating levels selectable: 750, 1,250 and 2,000 watts
TCH 19 E – 3 heating levels
Infinitely adjustable thermostat – automatically switches the device on and off to maintain the temperature
TCH 19 E – Thermostat
Large discharge grilles for maximum convection
TCH 19 E – Discharge grille
Practical recessed handles for a quick change of location
TCH 19 E – Carrying handles
Large feet for secure footing, included in the scope of delivery and ready for installation
TCH 19 E – Feet
Just set it up, plug it in, and you’re done.
TCH 19 E – Immediately ready for use
TCH 19 E
Tested for safety

Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority Intertek certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.

Frost monitor function

Frost monitor function

Ideal for short-term property vacancies or temporarily used rooms

Using the stepless thermal control of our mobile TCH convectors, you can also operate the devices in frost monitor operating mode. The heating device is then automatically activated by a thermostat to protect the rooms from frost and prevent excessive cooling. Functioning as frost guards, the TCH convectors are not only ideally suited for landlords and real estate companies – they also offer benefits for private and business people, who can thus keep vacant rooms and garages free from frost. Particularly rooms, conservatories or cellars which are not connected to a central heating system can be kept warm reliably this way.


BN30

Optimum room temperature control with the socket thermostat BN30

Just install it in the socket and connect it to the heating or cooling device on the socket thermostat BN30, and you can have your heating or cooling unit automatically switched on and off by the BN30 depending on the temperature. The socket thermostat available as an accessory is individually adjustable within a temperature range from 5 °C to 30 °C.

Radio thermostat BN35 with timer switch for the socket

Radio thermostat BN35

With the radio thermostat BN35 you can easily determine at which room temperature your heating or cooling unit will switch on or off using the remote control. The BN35 set consists of a radio-controlled socket and a radio thermostat. Simply plug the radio-controlled socket in between a wall outlet and your heating or cooling unit. Place the radio thermostat within approx. 20 metres in the place where the room temperature is to be measured. As an alternative, time-controlled regulation can also be carried out.

Buy

Technical data

Technical data
General information
  Article number 1.410.000.509
Heating capacity
  Level 1 [kW] 0.75
  Level 2 [kW] 1.25
  Level 3 [kW] 2
  Level Max. [kW] 2
Electrical values
  Mains connection 220 - 240 V/50 - 60 Hz
  Max. power input [W] 2,000
  Nominal current consumption [A] 8.7
  Protection class I
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 1.2
  Overheating protection
Mobility
  Feet
  Recessed handles
Dimensions
  Length (feet included) [mm] 200
  Width (feet included) [mm] 495
  Height (feet included) [mm] 330
Weight
  (packaging excluded) [kg] 2
Equipment, features and functions
Functions and features
  Operating control lamp
  Adjustable thermostat
  Thermostat-controlled automatic operation
  Automatic switch-off upon reaching the set value
  Frost monitor function
  Turbo blower
  24 h timer
Operation
  Overheating protection
  Steplessly adjustable thermostat

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...
This product is only designed for use inside well insulated rooms or for occasional use.