TCH 18 E
Home Comfort

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Machinery - HomeComfort
  3. Heating
  4. Convectors TCH-E series
  5. TCH 18 E

Convector TCH 18 E

Sick and tired of the cold? We give warmth the centre stage!

Used as additional heating solution on particularly cold winter days or the source of cosy warmth in the time between seasons – the TCH 18 E is a valuable aid in achieving an agreeable room temperature. This attractive convector quickly provides agreeable, odourless feel-good warmth and the compact dimensions render it smaller and less conspicuous than other models of the same performance class.

Warmth wherever it is needed

The direct heater TCH 18 E can be flexibly applied in all rooms: Simply connect it to a power outlet, set the desired temperature level via the infinitely variable thermostat, press the operating switch and you're done. Having switched on the electric heater, warm air immediately billows softly from its discharge grille.

The desired heating levels can be set by means of flip switches: 750 W, 1,250 W and if you actuate both switches you will be rewarded with the maximum output of 2,000 watts. This maximum setting is just perfect for the quick initial heating of utterly cold rooms.

A few practical benefits:

  • Heating capacity of up to 2,000 W for clean, non-condensing and odourless heat
  • Infinitely variable thermal control
  • Three heating levels (750 W, 1,250 W, 2,000 W)
  • Thermostat-controlled automatic operation
  • Frost monitor function
  • Energy-efficient operation thanks to automatic switch-off upon reaching the set value
  • Overheating protection
  • Noiseless heating
  • Secure footing due to large feet

Energy-efficient and budget-conscious heating

An integrated thermostat ensures a constant flow of warm air and automatically regulates the room temperature: Upon reaching the set value the convector heater is automatically switched off – and back on again once the temperature drops below the defined value. That is not only an energy-efficient solution, you will also be able to save money. An additional safety thermostat protects the device the compact device from overheating.

Since the TCH 18 E likes to take centre stage, this mobile heating solution is ideally used whilst centrally positioned in a room. Warm air is emitted towards the ceiling from where it is promptly distributed throughout the entire room.

Tip: Should you prefer to heat the room discreetly from one side, the model TCH 19 E – virtually identical in design and functioning – will be the perfect choice for you. TCH 19 E

Even convection heat

The air inside the convectors of the TCH series is warmed up by electrically heated wires and thus rises as warm air, which creates a natural suction that makes cold room air flow into the device. This leads to a permanent circulation of warm air reaching all corners of the entire room. The heat distributes evenly and an excessive or insufficient heating of individual areas is prevented. Once the preset degree of heat is reached, this energy-efficient device switches off automatically and only switches back on when falling below.

The TCH 18 E impresses with many practice-oriented details:

Multi-stage operating switch with integrated operating control lamp, three heating levels selectable: 750, 1,250 and 2,000 watts
TCH 18 E - 3 heating levels
Infinitely adjustable thermostat – automatically switches the device on and off to maintain the temperature
TCH 18 E - Thermostat
Large discharge grilles for maximum convection
TCH 18 E - Discharge grille
Convenient carrying handles for a quick change of location
TCH 18 E - Carrying handles
Large feet for secure footing, included in the scope of delivery and ready for installation
TCH 18 E - Feet
Just set it up, plug it in, and you’re done.
TCH 18 E - Immediately ready for use
TCH 18 E
Tested for safety

Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority Intertek certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.

Frost monitor function

Frost monitor function

Ideal for short-term property vacancies or temporarily used rooms

Using the stepless thermal control of our mobile TCH convectors, you can also operate the devices in frost monitor operating mode. The heating device is then automatically activated by a thermostat to protect the rooms from frost and prevent excessive cooling. Functioning as frost guards, the TCH convectors are not only ideally suited for landlords and real estate companies – they also offer benefits for private and business people, who can thus keep vacant rooms and garages free from frost. Particularly rooms, conservatories or cellars which are not connected to a central heating system can be kept warm reliably this way.


BN30

Optimum room temperature control with the socket thermostat BN30

Just install it in the socket and connect it to the heating or cooling device on the socket thermostat BN30, and you can have your heating or cooling unit automatically switched on and off by the BN30 depending on the temperature. The socket thermostat available as an accessory is individually adjustable within a temperature range from 5 °C to 30 °C.

Radio thermostat BN35 with timer switch for the socket

Radio thermostat BN35

With the radio thermostat BN35 you can easily determine at which room temperature your heating or cooling unit will switch on or off using the remote control. The BN35 set consists of a radio-controlled socket and a radio thermostat. Simply plug the radio-controlled socket in between a wall outlet and your heating or cooling unit. Place the radio thermostat within approx. 20 metres in the place where the room temperature is to be measured. As an alternative, time-controlled regulation can also be carried out.

Buy

Technical data

Technical data
General information
  Article number 1.410.000.508
Heating capacity
  Level 1 [kW] 0.75
  Level 2 [kW] 1.25
  Level 3 [kW] 2
  Level Max. [kW] 2
Electrical values
  Mains connection 220 - 240 V/50 - 60 Hz
  Max. power input [W] 2,000
  Nominal current consumption [A] 8.7
  Protection class I
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 1.2
  Overheating protection
Mobility
  Feet
  Carry/transport handle(s)
Dimensions
  Length (feet included) [mm] 200
  Width (feet included) [mm] 520
  Height (feet included) [mm] 345
Weight
  (packaging excluded) [kg] 2
Equipment, features and functions
Functions and features
  Adjustable thermostat
  Operating control lamp
  Thermostat-controlled automatic operation
  Automatic switch-off upon reaching the set value
  Frost monitor function
  Turbo blower
  24 h timer
Operation
  Overheating protection
  Multi-stage thermostat

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...
This product is only designed for use inside well insulated rooms or for occasional use.