Infrared radiant heater IR 1200 S
Energy-efficient quartz radiator – targeted warmth from the very first moment
Direct heat following the natural principle of the sun
Wherever targeted warmth is required immediately without a long warm-up time, the quartz radiator IR 1200 S is the optimal solution. Applied on the balcony, roofed over terrace or in the in the catering area: the practical all-rounder generates direct heat by means of infrared radiation following the natural principle of the sun and thus cosily warms up the immediate surroundings from the very first moment.
Enjoy utterly quiet, odourless heating without raising dust
The radiant heater operates entirely odourless and noiseless and, since it does not have a fan, it does not raise any dust either. This is particularly advantageous for allergy sufferers. Coming equipped with two modern quartz heating rods, the infrared radiant heater converts a major part of the energy input into direct heat, which makes it particularly energy-efficient.
Powerful heating capacity
The IR 1200 S comes with two heating levels of 600 and 1200 watts of heating capacity. Even the lowest level delivers impressive heating results. The radiator can be conveniently operated with the integrated pull switch. To ensure a precise alignment of the thermal radiation the infrared radiant heater intended for wall mounting can be adjusted by 60°.
The high-quality metal housing – splash-proof according to protection type IP24 – makes the quartz radiator IR 1200 S an appealing heat source. Owing to the integrated suspension device it is assembled with lightning speed. Then all you need to do is plug the device in, pull the pull switch and indulge in the directly radiated cosy warmth!
The IR 1200 S also impresses with the small details:
Cosy warmth wherever it is needed ...
All infrared radiant heaters in direct comparison:
To find the radiant heater which exactly meets your requirements, please consult the concise overview of all radiant heaters from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Infrared heat without preheating
- Even and targeted heat distribution
- Clean, non-condensing, odourless and free from noise
- No dust circulation, thus suitable for allergy sufferers
- 2 heating levels, up to 1,200 watts
- 2 quartz elements
- Splash-proof, protection type IP24
- Adjustable inclination angle with a wide effective range
- Suitable for wall mounting
- Integrated suspension device
Overview of the maximum heating range to be covered by a 1,200 watt infrared radiant heater:
heating capacity per m²
|Area that can be
covered by an infrared heater
with 1,200 W
approx. 150 W/m²
|approx. 8 m²|
approx. 250 W/m²
|approx. 5 m²|
You can proceed as follows to calculate the heating capacity (in watts) required for your room size:
Formula: m² x W/m² = W
room size (m²) x recommended heating capacity per square metre (W/m²) = required heating capacity of the infrared radiator (W)
Sample calculation: For a well insulated room sized 25 m² we recommend the following heating capacity: 25 m² x 100 W/m² = 2,500 W
Optimum room temperature control with the socket thermostat BN30
Just install it in the socket and connect it to the heating or cooling device on the socket thermostat BN30, and you can have your heating or cooling unit automatically switched on and off by the BN30 depending on the temperature. The socket thermostat available as an accessory is individually adjustable within a temperature range from 5 °C to 30 °C.
Radio thermostat BN35 with timer switch for the socket
With the radio thermostat BN35 you can easily determine at which room temperature your heating or cooling unit will switch on or off using the remote control. The BN35 set consists of a radio-controlled socket and a radio thermostat. Simply plug the radio-controlled socket in between a wall outlet and your heating or cooling unit. Place the radio thermostat within approx. 20 metres in the place where the room temperature is to be measured. As an alternative, time-controlled regulation can also be carried out.
Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority Intertek certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.
Der IR 1200 S verfügt über 2 Heizstufen von 600 Watt und 1.200 Watt Heizleistung. Die Bedienung des Strahlers erfolgt bequem über einen integrierten Zugschalter. Der zur Wandmontage vorgesehene Infrarot-Heizstrahler kann um 60° verstellt werden, um die Wärmestrahlung punktgenau auszurichten.
Sie sparen: 25 %
39.95 € 29.95 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen
|Level 1 [kW]||0.6|
|Level 2 [kW]||1.2|
|IP type of protection||IP24|
|Mains connection||220 - 240 V/50 - 60 Hz|
|Nominal current consumption [A]||5.2|
|Connection plug||CEE 7/7|
|Cable length [m]||1.2|
|Length (packaging excluded) [mm]||113|
|Width (packaging excluded) [mm]||538|
|Height (packaging excluded) [mm]||135|
|(packaging excluded) [kg]||1.5|
|Equipment, features and functions|
|Functions and features|
|Infrared remote control|
|Operating control lamp|