Gas heater fans of the TGH-E series
Budget-friendly instant heat produced by a heating capacity of up to 30 kW
When it comes to affordable instant heat for construction sites, workshops, stables or greenhouses, there is practically no other way than using a gas heating device. For gas is a low-priced energy source – and combined with the inexpensive heater fans of the TGH-E series it makes for one of the most economic and simultaneously effective instant heating solutions.
The TGH-E series: a good choice, it is safe to say
These robust branded gas heater fans not only impress with their outstanding value-for-money ratio, it goes without saying that safety is also a major priority with these propane heaters:
An integrated temperature sensor serves as flame failure protection and prevents the emission of unburnt gas. Moreover, the standard equipment includes a safety thermostat for overheating protection which automatically interrupts the gas supply in case of overheating while the fan continues to run to ensure the necessary cooling. The specially shaped discharge grille of the TGH-E models prevents direct contact with the flame whilst ensuring an optimally swirled, high-volume current of warm air. Last but not least, the thermally insulated transport handle permits the safe and simple transportation to the next operating site where – thanks to additionally fitted slip-proof rubber feet – the gas heater fan can be set up safely. Owing to their extremely compact design, the heating devices can easily be transported even in the smallest of car boots.
Since connection hose and pressure reducer for connecting the gas cylinder are already included in the scope of delivery of each gas heating device, nothing more than a socket and a propane cylinder is required for the heating operation. The long connection cable increases your flexibility in selecting the installation site. Once in operation, agreeable warmth begins to spread immediately, seeing as the integrated turbo blower ensures an effective air flow made up of sucked in ambient air and blown out warm air. Even larger rooms can quickly be heated in this manner.
For instance, you can use the gas heater fans of the TGH-E series for mobile spot heating of well-ventilated construction sites, workshops, storage spaces, garages, stables, greenhouses or else roofed outdoor areas, tents and marquees. Rough operating conditions hardly matter to these heating devices, for they come with a hard-wearing, robust metal construction including space heater in powder-coated corrugated sheet metal design.
A few practical benefits:
- Mobile propane heater fans with
a heating capacity of up to 30 kW
- Thermostatic and sensor-controlled
safety devices for maximum protection
- Individual buttons for gas flow and piezo ignition to prevent unintentional activation
robust metal construction
- Thermally insulated carrying handle
- Space heater in powder-coated corrugated sheet metal design
- Secure footing due to slip-proof rubber feet
- Turbo blower for a maximum
of hot air current
- Fan operation also possible
without heating function
- Pressure reducer and gas line already
included in the scope of delivery
The TGH-E series can supply an appropriate heating capacity for every demand
With respect to varying room sizes and the corresponding heating demand, the TGH-E series certainly holds a suitable gas heater fan for all individual requirements:
- for rooms sized up to 100 m³: gas heater fan TGH 11 E with a heating capacity of up to 10 kW,
- for rooms sized up to 150 m³: gas heater fan TGH 15 E with a heating capacity of up to 15 kW,
- for rooms sized up to 300 m³: gas heater fan TGH 30 E with a heating capacity of up to 30 kW.
As previously mentioned, nothing more than a socket and a propane cylinder is required for the heating operation. And the supplied long connection cable increases your flexibility in selecting the installation site.