Commercial air conditioner PT 15000 S in proven Trotec quality
  1. Products & Services
  2. Machines - HighPerformance
  3. Air conditioning
  4. Commercial air conditioning units of the PT series
  5. PT 15000 S

Commercial air conditioner PT 15000 S

Particularly powerful split air conditioner with refrigerant-free connection lines

Two heat exchangers and two connection sets in the scope of delivery
Compact design for a high degree of mobility
Wide air outlets for cooling with strong air recirculation

Mobile cooling for professionals

The flexible mobile air conditioner PT 15000 S was designed specifically for the demanding requirements in rental business and is characterized by an equally robust and transport-friendly split design, extreme maintenance-friendliness and reliability in cooling operation. Thanks to the quick-lock couplings at the connection set the external heat exchangers can be connected in no time. Install, connect the heat exchangers, connect the power supply, ready for use ‑ quickly in only a few minutes!

The connection line just contains circulating water mixed with glycol, so that there is no refrigerant loss when the air conditioner is connected and disconnected. By combining several connection sets the covered distance may be increased to maximally 30 metres, if required, which therefore also allows for the cooling of remote rooms.

The design is implemented along the lines of the function – consistent to the last detail

The robust design of the PT 15000 S with hardwearing panels made of galvanized and additionally powder-coated steel ensures a high resistance to climatic influences and aggressive surroundings.

Equipped with sturdy casters and designed in an especially slim fashion, this air conditioner can be easily transported and manoeuvred in the smallest space – the PT 15000 S fits through every door and into every lift. Due to its specially reinforced housing, the cooling unit with its optional crane lugs can also be easily transported by means of a crane. Two integrated bar handles additionally protect the front panel from impact damage while simultaneously allowing easier handling.

Powerful cooling technology for continuous operation

Numerous detailed solutions prove the soundness and high quality of this professional air conditioner. For example we used super robust finned aluminium heat exchangers with thick-walled copper tubing. Additionally, the heat exchangers' rotary compressor was fitted on vibration absorbers to ensure the maximum lifetime.

Together with the adjustable outlet grille, two axial fans with powerful recirculation for large-volume air circulation ensures homogeneous ventilation even of large rooms. Due to microprocessor-controlled hot gas defrost cycles as well as the preselectable blower level and target temperature, the optimum room temperature for every cooling requirement can be achieved – depending on the operating conditions even to below 10 °C

Its robust and compact design and the high performance of the PT 15000 S make this air conditioner the first choice for numerous cooling applications – and, with its optionally available top piece, also as a spot cooler.

Possible use:

  • Emergency cooling
  • Trade fairs and exhibitions
  • Laboratories
  • Offices and shops
  • Marquees
  • Temporary shelter
  • Storage and production facilities
  • Computer rooms, measuring and control centres
  • Catering trade
  • Cooling at peak times
The mobile air conditioner PT 15000 S is perfectly suited for a variety of cooling applications

Practical details for the quick application into frequently changing environments

All operating settings can be made quickly and easily made via the user-friendly control panel, which also provides a central display of all status indications with regard to the operating mode, blower level or room temperature.
Central, user-friendly control panel
The air conditioner PT 15000 S was manufactured in an especially slim design, allowing it to fit through any door and into every lift without any problems.
Transport-friendly slim design
A recessed service compartment at the rear houses all device terminals and at the same time serves to store the connecting cable for transport purposes.
Recessed service compartment at the rear, containing all connections
The integrated MID-compliant energy consumption meter comes equipped with and additional service menu providing information for maintenance.
MID-compliant current measuring system with additional functions
In its interior, the PT 15000 S houses a powerful compression refrigeration system and two strong axial fans.
Compact design with powerful cooling technology
Movable fins at the outlet grille allow you to adapt the direction of the cooling air flow to exactly your needs, and, using the knurled screws in the corners, an optionally available spot cooling attachment can be mounted on the air conditioner PT 15000 S.
Adjustable discharge direction of the cooling air
The air conditioner PT 15000 S is supplied ready for use incl. two external heat exchangers and the corresponding connection sets of 10 m length each.
Scope of delivery for commercial air conditioner PT 15000 S
The air conditioner is actuated with two powerful heat exchangers of the type PT S+, which are equipped with adjustable spacers and a suspension chain that can be hinged.
Powerful heat exchanger PT S+
As an order option, the air conditioner can come equipped with crane lugs mounted on both sides to ensure maximum mobility.
Optionally equipped with crane lugs
In order to protect the device when you store it outdoors, a matching weather protection cover of robust PVC tarpaulin can be supplied as accessory part.
Weather protection cover available as accessory part

Connecting as quick as lightning thanks to water cooling circuit with quick release fastener

PT connection sets with quick-lock coupling
PT connection set

Installing connecting lines flexibly, quickly and easily – this feature is certainly a plus:

The air conditioning systems of the PT series come with two separate cooling circuits. The refrigerant circuit of the basic device is hermetically sealed. By contrast, another circuit is installed between cooling unit and external heat exchanger for cooling the condenser as well as for heat removal using a connection set. In this additional circuit only water with a low glycol concentration circulates as cooling medium, thus ruling out a loss of refrigerant when connecting or disconnecting the devices in a professional fashion.

For a quick installation of the water and power lines between air conditioner and heat exchanger the connection sets of these air conditioning systems come equipped with high-class quick-lock couplings. As a result, even longer connections over a distance of up to 30 metres can be realized without difficulty in a quick, clean and easy manner – ideal for office, server or production rooms, control centres or studios, where there is hardly ever any room to accommodate such heat dissipation measures.

Patented passage underneath doors PlanoPT

Plano PT even opens up installation paths to you the access to which has been denied to you so far

The exclusive Trotec PlanoPT Allows for the installation of the PT connecting lines underneath all common interior and exterior doors. In this way, even rooms without a conventional installation access can be equipped with cooling units by means of the patented PlanoPT. Find out more about the benefits of Trotec's PlanoPT ...

Quick installation using PT connection sets

With the air conditioners of the PT series it is possible to install the external heat exchanger up to 30 m away from the cooled room by using connection sets. The hoses are simply led through ceilings, walls or along the floor.
Quick installation using PT connection sets

Optional passage underneath doors with PlanoPT

With the PlanoPT connection feedthrough, which is available as accessory, connection sets can be installed and connected underneath doors. The connection sets of the PT models are optionally also available in a length of 5 m and can be flexibly combined with the 10 m lines to an overall length of 30 m.
Optional passage underneath doors with PlanoPT

Functional diagram for the PT 15000 S

Split design – bundled cooling power

The interior unit of the PT 15000 S houses a powerful cooling compressor system with a hermetic refrigerant circuit. Within this circuit, the sucked-in room air is cooled down to the setpoint temperature selected and then emitted as cooling air to the room again via the two axial fans which produce powerful air recirculation. The air recirculation of the PT 15000 S provides the additional benefit that neither interior air is consumed nor underpressure is generated.

As a result of the process, refrigeration also produces heat. In order to prevent this heat from also entering in the room air again, the process heat generated in the condenser is dissipated in a separate system via a circulating cooling medium to the external heat exchangers by means of a pump.

The connection between the interior unit and the externally placed heat exchangers can be quickly established using the PT connection sets. They are provided with quick-lock couplings and allow for an overall installation path of up to 30 metres between the interior and external unit.

The cooling medium circulating in the connecting lines is only water with a low glycol fraction, thus preventing the loss of refrigerant when the devices are professionally mounted and dismounted.

In the external unit the cooling medium then flows through a large-volume heat exchanger, through which sucked-in ambient air is blown for the purpose of thermal absorption. In a last step, the cooling medium with its now reduced temperature flows back to the interior unit via the connection line to absorb new heat there.

Spot cooling option

Spot cooling option

For the cooling of system parts, often not the steady reduction of the room temperature as a whole is relevant, but the targeted cooling down of special components, for instance, generating a large amount of heat.

Typical applications are for example computer centres or SMT machines the sufficient cooling of which can no longer be reliably ensured in existing installations during the hot months.

For such applications, the PT 15000 S can also be utilized as a spot cooler if required. By means of the optionally available spot cooling attachment, the cooling airflow generated can be focused and directed accurately at the spot to be cooled via the air transport hose connected.

What cooling capacity do your rooms require?

For business facilities, surgeries, offices or warehouses, you can use the following values to carry out a quick and approximate determination of your demand for the cooling capacity required:

  • 30 watts per cubic metre
    for ideal-typical business facilities along the lines of passive house standard, normal sized window area and little frequented
  • Additional 10 watts per cubic metre
    in case of poor insulation
  • Additional 10 watts per cubic metre
    if there are more than 3 individuals in the room
  • Additional 10 watts per cubic metre
    if the size of the window area exceeds the average
  • Additional 10 watts per cubic metre
    if the windows and/or outer walls are facing south
  • 50 watts per cubic metre
    for attic rooms.
    Especially in case of attic rooms in old buildings determining the required cooling capacity remains a difficult task due to the lack of knowledge regarding the roof's thermal insulation. Just to be on the safe side, take 60 watts per cubic metre as a basis, in the case of poorly insulated roofs and many skylights, still more.
  • 55 watts per cubic metre
    when using air conditioners in construction site trailers

Online capacity calculation

An individual cooling load calculation in addition to spatial specifications also requires taking into consideration the usage behaviour and further heat loads. Therefore, for a more detailed calculation, please make use of our online calculator.

Invaluable practical benefits for rental companies

A high degree of versatility by Duplex cooling with DualHex coupling – ideal for extreme ambient temperatures

Benefit from an extended operational range of the air conditioner PT 15000 S via Duplex Cooling by connecting two heat exchangers in series to each of the two connecting lines via DualHex coupling now instead of one heat exchanger.

In this way you can operate the air conditioner PT 15000 S with a total of four heat exchangers of the type PT S+ – two heat exchangers on each of the two connecting lines in each case.

DualHex coupling for the Duplex cooling application

Duplex Cooling allows for a ΔT increase of the upper working range limit value by 7 °C.

With this technology, the air conditioner PT 15000 S can even be used with ambient temperatures of up to 42 °C – or the device does not run under full load at lower temperatures.

For optional Duplex cooling operation, in addition to two DualHex couplings, two additional heat exchangers of the type PT S+ are required.

Duplex Cooling with DualHex coupling
Technical data by comparison

All air conditioners of the PT series by direct comparison:

To find the air conditioner PT which exactly meets your requirements, please consult the concise overview of all air conditioners of the PT series from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison


A few practical benefits:

  • Development, design, production: 100 % Trotec
  • Robust construction, specifically designed for mobile applications in the rental business
  • Even larger rooms are cooled down quickly
  • Simple installation without the need to consult specialists – ready for use in a matter of minutes
  • Refrigerant-free heat removal from the internal unit to the heat exchanger
  • Hot gas-controlled defrost unit for uninterrupted cooling operation
  • Connection lines extendable to up to 30 m by use of quick-lock couplings for cooling remote and windowless rooms

Buy

Technical data

Technical data
General information
  Article number 1.210.001.075
Type
  Split
  Monobloc
Cooling capacity at 25 °C
  Cooling capacity [kW] 15
  Cooling capacity [Btu/h] 51,182
Cooling capacity
  Max. cooling capacity [kW] 16
  Max. cooling capacity [Btu/h] 54,594
Air flow rate
  Level min. [m³/h] 2,000
  Level Max. [m³/h] 2,600
Fan
  stages 3
Attainable room temperature (min.)
  depending on operating conditions [°C] 10
Cooling medium
  Cooling medium Water
Ambient conditions
  Min. temperature range [°C] 7
  Max. temperature range [°C] 35
Electrical values
  Mains connection 400 V/50 Hz
  Power input [kW] 6
  Nominal current consumption [A] 9.5
  Recommended fusing [A] 32
Compressor
  Type of cooling agent R-410A
  Amount of refrigerant [g] 1,550
  GWP factor 2,088
  CO2 equivalent [t] 3.24
  Pressure suction side [MPa] 3
  Pressure outlet side [MPa] 4.15
Sound values
  Level 1 - Distance 3 m [dB(A)] 51
  Level 2 - Distance 3 m [dB(A)] 56
  Level 3 - Distance 3 m [dB(A)] 65
Exhaust air hose
  Total length [m]
  Diameter [mm]
Power input external unit
  kW 0.18
Sound values external unit
  Sound level Level Max. - 3 m [dB(A)] 65
Connection line external unit
  Total length [m] 30
Heat dissipation
  External heat exchanger
  Closed water circuit
  Air
  hose length [m]
  Max. connecting line [m] 30
  Length of the connecting line [m] 10 (included in the scope of delivery)
Dimensions
  Length (packaging excluded) [mm] 460
  Width (packaging excluded) [mm] 1,050
  Height (packaging excluded) [mm] 1,570
Weight
  (packaging excluded) [kg] 206
Equipment, features and functions
Condensate draining
  Automatic
Room thermostat
  Available
Room air filter
  Readily accessible
  Cleanable
Additional functions
  Adjustable air discharge direction
  Automatic function
  Dehumidification function
  Ventilation function
Mobility
  Carry/transport handle(s)
  Plastic wheels
  Crane lugs

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...