Advice for private customers: +49 2452 962-450

Advice for business customers: +49 2452 962-400

Mon - Fri: 9:00 - 17:00 (CET)

Oil heater fan IDS 30 D from Trotec
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Heating
  4. Oil heater fans of the IDS series
  5. IDS 30 D

Oil heater fan IDS 30 D

Robust direct oil heater fan for quick, uncomplicated heating applications

Oil heater fan IDS 30 D
Oil heater fan IDS 30 D
Oil heater fan IDS 30 D

IDS 30 D – mobile heating power for the construction industry and the agricultural sector

As a direct heater, the oil heater fan IDS 30 D offers mobile heating power with a 100 % efficiency directly on the spot. It is suited both for heating well-ventilated stables or construction sites in winter and for defrosting machines, vehicles or pipes.  

The IDS 30 D combines reliable operation including very low maintenance costs with an attractive value-for-money ratio and a high safety level. Therefore, the robust design comes equipped with an electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling. The double-walled housing with its protective coating offers effective sound insulation and at the same time minimises the surface temperature of the outer casing and thus the risk of injury for the user.

The oil heater fan IDS 30 D stands for quality “Made in Europe”, circulates 605 m³ of air per hour and achieves a rated heat output of 38.4 kW. Its carriage with the large wheels allows for easy transport and quick change of application.

IDS direct oil heater fans – 100 % heating power for outdoor areas

The direct oil heater fans of the IDS series are optimally suited for outdoor use, e.g. for heating outdoor construction sites and agricultural areas, or for the use inside well-ventilated interior spaces, for they emit 100 % of the heat they produce. That’s why direct oil heater fans have no chimney. Or in other words, this process yields a heating power efficiency of 100 %.

In a directly heated system the fan blowing out the heated air also brings along combustion air.

A pump draws the fuel from the tank, brings it to operating pressure and, in a final step, guides it into the combustion chamber via an atomiser nozzle. There, the air-fuel mixture is burnt and the hot air generated is then mixed with the main air flow of the blower with exact dosage.

In addition to heat, direct heaters thus also emit combustion gases directly into the room. For this reason, they are unsuitable for poorly ventilated, closed rooms used by people or animals.

Since plenty of moisture is released during combustion, direct oil heater fans should never be used for construction drying.

Functional diagram IDS 30 D
The IDS 30 D offers a wide range of applications

The IDS 30 D offers a wide range of applications

The combination of easy handling, a carriage design with mobile use and a maximum rated heat output of 38.4 kW makes the direct oil heater fan IDS 30 D a versatile heating solution for a large variety of applications, for instance:

  • Heating of well-ventilated stables
  • Air heating on winter construction sites
  • Defrosting of and keeping machines, vehicles or pipes free of ice
  • Drying of agricultural goods like hay or grains
  • Heating of construction materials
  • Heating of well-ventilated interior spaces and roofed-over outdoor areas

VIDEOS: Trotec oil heater blowers live in action

In our Youtube playlist we have compiled exciting projects that users have realised with Trotec oil heater blowers. The application possibilities are manifold and the tinkerers have implemented their personal vision of a warm working environment with a lot of ingenuity and commitment. Very inspiring!

VIDEOS: Trotec oil heater blowers live in action

Special equipment features of the oil heater fan IDS 30 D

Thanks to the carriage design with the push bar frame and front wheels, the oil heater fan IDS 30 D can be easily transported from one point of use to the other.
Practical carriage design
To prevent the connecting cable from becoming a trip hazard during transport, an integrated cable holder allows for fastening the connecting cable safely whilst the device is transported.
Cable holder for safe storage during transport
For automatic operation, the operating panel which is recessed for protective purposes is equipped with a connection for an external thermostat by means of which the temperature can be measured and controlled at a location to be heated that is up to 10 metres away (a thermostat is optionally available).
Connection for external thermostat
The integrated tank can be filled easily and has a storage capacity of 42 litres of fuel – enough for more than 11 h of maximum operation.
Integrated 42 litre tank
The IDS 30 D comes equipped with a two-line heating system with an easily accessible external fuel filter.
Readily accessible fuel filter

To the heating capacity calculator

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator


Oil heater fan IDS 30 D

A few practical benefits:

  • Integrated oil burner 
  • Electronic flame trap
  • Overheating thermostat
  • Stainless steel combustion chamber
  • Integrated fuel tank
  • Double-walled housing for optimum soundproofing and insulation
  • Suited for the fully automatic application with external thermostat
Continue directly to the practical knowledge guidebook for professional heating

Practical knowledge guidebook – heating know-how for professional users

Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.

Continue to the practical knowledge guidebook for professional heating


Technical data by comparison

All oil heater fans of the IDS series by direct comparison:

To find the IDS oil heater fan which exactly meets your requirements, please consult the concise overview of all devices from the Trotec IDS series, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison


Buy

Direkt-Ölheizer IDS 30 D show in Trotec online shop

Direkt-Ölheizer IDS 30 D

You save: 301.51 €

1,011.50 € 709.99 € incl. VAT Show net price (VAT not included)

buy

Technical data

Technical data
General information
  Article number 1.430.000.025
Functional principle
  Oil
  Method of heating direct
Air flow rate
  Level Max. 605
Fan
  axial
Nominal heat input
  Level Max. [kW] 38.4
Nominal heat output
  Level Max. [kW] 38.4
  Level Max. [kcal] 33,020
Temperature increase
  Level Max. [°C] 75
Electrical values
  Mains connection 230 V, 50 Hz
  Current consumption [A] 1.25
  Power input [kW] 0.272
  Heating capacity [kW] 38.4
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 1.2
Operation
  Connection for external thermostat
Fuel feed
  Fuel feed Danfoss pump
Fuel filter
  Available
Oil consumption
  Level Max. [l/h] 3.66
Kraftstofftank
  Content [l] 42
  Tank Kunststoff
Hose connection
  Diameter | Hose connection [mm]
Chimney connection
  Diameter [mm]
Sound values
  Distance 1 m [dB(A)] 69
Suitable fuels
  Kerosene
  Diesel
  EL fuel oil
  Low-sulphur EL fuel oil
Dimensions
  Length (packaging excluded) [mm] 1,050
  Width (packaging excluded) [mm] 400
  Height (packaging excluded) [mm] 520
Weight
  (packaging excluded) [kg] 20
Equipment, features and functions
Mobility
  Carry/transport handle(s)
  Wheels
Housing design
  Steel
Safety feature
  Overheating protection
  IPX4

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Seminars

Downloads

Loading...

Videos