Industrial condenser dryer DH 95 S
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Dehumidification
  4. Condensation dehumidifiers, stationary
  5. Industrial dryers of the DH-S series
  6. DH 95 S

Industrial condenser dryer DH 95 S

The standard industrial dryer DH 95 S dries up to 130 liters per day

Reliable dryer with high dehumidification capacity

This standard industrial dryer dehumidifies up to 130 litres per day and is a particularly economical solution for keeping stored goods dry and to prevent damages caused by mould as well as corrosion during industrial processes.

The dryer comes equipped with an integrated hot gas automatic defrost, which guarantees efficient dry keeping without breaks for defrosting at certain intervals in which dehumidification pauses.

Via the external outlet of the DH 95 S condensate can be drained across stories, because the standard condensate pump is designed for a discharge head of four metres.

The DH 95 S is fitted with modularly refined electrical equipment and pipes containing water according to European standard – all manually finished and quality-controlled at Trotec in Germany.

Investment protection for your drying devices

Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...

Technical construction drying

Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...

A permanent air dehumidification with the DH 95 S offers the following advantages:

  • Prevention of damages caused by mould as well as corrosion
  • Prevention of condensation formation
  • Protection against moisture damages on building structure, production facilities and inventory
  • Increased reliability of electrical equipment
  • Dehumidification for process optimization in the industry
  • Protection and preservation of valuable goods
  • Reduction of unpleasant odours
  • Reduced heating costs due to optimized humidity
  • Noiseless and effective dry keeping

DH 95 S - Special equipment features

DH 95 S - Dimensions
The compact DH 95 S industrial dehumidifier dries up to 130 litres per day.
Control panel DH 95 S
The central control panel of the DH 95 S permits a quick and convenient configuration of the dehumidifier.
Condensate drain DH 95 S
For longer continuous use or unattended dehumidification, the enclosed condensate drain hose should be connected to the unit.
DH 95 S - Indicator light and button for draining residual water
Indicator light with buzzer and button for draining the condensate tray of residual water.

Application examples from practical experience:

DH-S series - Application warehouse
With the DH-S standard series, you can cost-effectively protect stored goods from moisture damage.
DH-S series - Production application
With the DH-S standard series, you can cost-effectively protect production facilities from moisture damage.
DH-S series - Construction site application
With the DH-S standard series, you can cost-effectively protect building structures from moisture damage.
DH-S-Series - Application Inventory Protection
With the DH-S standard series, you can cost-effectively protect inventory from moisture damage.

All Industrial dryers of the DH-S series in direct comparison:

To find the industrial dryer which exactly meets your requirements, please consult the concise overview of all Industrial dryers of the DH-S series from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Reliable dryer with a high dehumidification capacity
  • Particularly cost-effective solution for typical dry keeping applications in production halls or warehouses
  • As standard with integrated condensate pump
  • Modular refinement of electrical equipment and components containing water according to European standard – handmade in Germany
  • Optimum price-performance ratio

Make use of our best practice industrial services

You can count on our experts

In order to precisely calculate the demand in the industry and to develop tailor-made concepts for climate conditioning experienced climate specialists are needed. Rely on our team of experts as well as the industrial services: We analyse the individual requirement situation with you present on site, determine the specific demand for devices and develop a tailor-made project solution right up to the exact positioning of the devices.

Before the planned stationary units are installed, our service team first works with mobile versions of the drying units as part of a trial run. These can be put up without any difficulty or the need for structural changes.

During this validation phase we document all relevant climate parameters such as air temperature, relative humidity, dew point or flow rate for a final optimization of the requirement calculation.

Trotec is the only provider of this advantage:

Thanks to the unique option of non-binding trial operation you will invest solely in solutions which have verifiably proven their worth in everyday operation meeting your individual on-site requirements. The stationary units will not be ordered until you are fully satisfied with our concept. The only costs incurred consist of an inexpensive hiring flat rate for the time of test operation.

Just give us a call at +49 2452 962-777 – our industry consultants will be pleased to help you personally and provide information regarding our best practice industrial services. Or send a request indicating your personal requirements directly to our industry experts. We will answer promptly!

Make use of Trotec's best practice industrial services

Since every industrial undertaking has characteristic process flows, installations and facilities, every air treatment solution demands case-specific device configurations. All in all, the combined effects of air currents, humidity conditions and temperature fluctuations are often hard to calculate on a purely theoretical basis, e.g. in airlock areas or on conveying paths. The consequence: Unnecessary additional costs due to an overestimated demand or – even worse – solutions not working sufficiently in real life.

Shop

Industrie-Kondenstrockner DH 95 S show in Trotec online shop

Technical data

Technical data
General information
  Article number 1.125.000.210
Dehumidification performance
  At 20 °C / 60 % RH [l/24h] 35
  At 30 °C / 80 % RH [l/24h] 130
Air flow rate
  Level Max. [m³/h] 1,100
Operating range
  Min. temperature [°C] 5
  Max. temperature [°C] 32
  Min. humidity [% r.F.] 30
  Max. humidity [% r.F.] 100
Electrical values
  Mains connection 230 V/50 Hz
  Nominal current consumption [A] 13.2
  Power input [kW] 2.77
  Required current starting phase [A] 16
  Recommended fusing [A] 20
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 2
Compressor
  refrigerant R-410A
  Amount of refrigerant [g] 1,350
  GWP factor 2,088
  CO2 equivalent 2.82
  Pressure outlet side [MPa] 3.1
  Pressure suction side [MPa] 1.65
Sound values
  Distance 1 m [dB(A)] 62
  Distance 3 m [dB(A)] 53
Dimensions
  Length (packaging excluded) [mm] 465
  Width (packaging excluded) [mm] 600
  Height (packaging excluded) [mm] 910
Weight
  (packaging excluded) [kg] 65
Equipment, features and functions
Mobility
  Forklift
  Carry/transport handle(s)
  Plastic wheels
  Non-marking full-rubber wheels
  Adjustable bar handle
  Rubber-tyred metal wheels
  Swivel casters with parking brakes
Automatic dehumidification
  Non-stop dehumidification
  Electronic hygrostat
  Hygrostat-controlled
  Analogue hygrostat
  Program-controlled
Automatic defrost system
  Hot gas
  Electronic
Hygrostat
  Internal
Condensate drain
  Hose connection possible
  Hose included in the scope of delivery
  Condensate pump
  Recommended hose size [mm] 8x1
Condensate pump
  Integrated condensate pump
  Residual water draining function
  Pump height [m] 4
  Max. conveying capacity [l/h] 288

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...