TTK 175 S commercial dehumidifier
Powerful drying technology at the top of the game...
Wheel it in and watch it work
The TTK 175 S impresses with a variety of detailed solutions which save you time, enhance your performance and secure value retention – attractively combined in the tried and tested German industrial design – protected prototype.
All electrical components are also protected from dust and dampness by default. The special enclosure offers maximum protection of the electronic equipment from anything dangerous which may enter and impair the functionality and durability. This enclosure predestines the commercial dehumidifier for rough environments at various sites.
Furthermore, compared with other defrost systems, the high-quality hot gas automatic defrost of the TTK 175 S guarantees a much more efficient dehumidification performance without defrost pauses on a time interval during which no dehumidification occurs!
Powerful rotary compressor technology in a robust carriage design
Thanks to the ergonomic construction and carriage design with a bar handle and large wheels, the TTK 175 S can easily be transported in construction site conditions or up and down stairs. The non-marking rubber wheels leave no marks on your floorboards or other sensitive flooring indoors.
The rotary compressor of the TTK 175 S not only makes it possible to transport it just about anywhere, it also allows you to start the dehumidifier immediately after positioning.
Once it is in position, this powerful condenser dryer immediately shows what it is capable of.The TTK 175 S' high-quality 0.88 kW rotation compressor is able to offer drying capacities of up to 50 litres per day and impresses even at low ambient temperatures with its high dehumidification performance.
Two stacking grooves make it possible to stably stack equally sized TTK S commercial dehumidifiers to save space.
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
Propane (R290) as environmentally friendly refrigerant in dehumidifiers
Every year, several million tonnes of environmentally harmful CO2-emissions (greenhouse gases) are emitted into the air by synthetic refrigerants. For this reason, the utilization of alternative refrigerants has become one of our key objectives. By using propane (R290) as refrigerant, this dehumidifier makes a valuable contribution to protecting our climate.
The natural refrigerant propane (R290) is an organic compound belonging to the group of hydrocarbons. Unlike synthetic refrigerants the environmentally friendly propane (R290) comes with neither ozone depletion potential (ODP = 0) nor a noteworthy greenhouse effect (GWP = 3).
Additional bonus for the environment: Owing to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant thereby additionally reducing your energy costs.
The central equipment features of the TTK 175 S at a glance
A few practical benefits:
- Development, design, production: 100 % Trotec
- High dehumidification performance even at low temperatures
- Maximum dust and dampness protection for all electrical components
- Very easy to maintain construction
- Optimal handling
- Portable and easily stored anywhere thanks to its rotary compressor
External condensate pump for continuous operation
This optionally available condensate pump is compatible with all TTK-S models from Trotec and is ideally suited for longer, unattended dry keeping applications. With a pump height of up to 5 metres the condensate can be pumped from the collection container of the construction dryer into a larger container or outside. This makes it possible to let the construction dryer run in continuous operation without a full collection container interrupting the dehumidification process.
Proper energy billing for existing equipment without meters?
You're using this or another electrical appliance without MID-compliant energy consumption meter of which you have to report the current consumption to insurance companies? Then the BX50 MID is the perfect solution. Just install it between the device and a fixed socket – done!
Quicker construction drying by air circulation
The drying time can be reduced by half if construction dryers and fans are combined. In doing this, each dryer is supplemented with a fan, which significantly improves the drying performance and thus also the duration of the drying process.
The increased air circulation results in a quicker evaporation of the humidity, for the higher the flow rate at the material surface, the sooner will the drying process be completed.
The axial fans of the TTV series and TTV-S series are especially suitable to provide assistance with regard to the drying process.
All Commercial dehumidifiers of the TTK-S series in direct comparison:
To find the Commercial dehumidifier of the TTK-S series which exactly meets your requirements, please consult the concise overview of all Commercial dehumidifiers of the TTK-S series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
|At 20 °C / 60 % RH [l/24h]||18|
|At 30 °C / 80 % RH [l/24h]||40|
|Air flow rate|
|Level Max. [m³/h]||580|
|Recommended room size construction drying|
|Recommended room size dry keeping|
|Min. temperature range [°C]||5|
|Max. temperature range [°C]||32|
|Min. humidity range [% RH]||50|
|Max. humidity range [% RH]||90|
|Mains connection||220 - 240 V/50 Hz|
|Nominal current consumption [A]||2.8|
|Power input [kW]||0.6|
|Recommended fusing [A]||10|
|Rotary piston compressor|
|Reciprocating piston compressor|
|Amount of refrigerant [g]||150|
|Pressure suction side [MPa]||1.1|
|Pressure outlet side [MPa]||3.1|
|Max. permissible pressure [Mpa]||3.1|
|Contents in [Litres]||6|
|Distance 1 m [dB(A)]||52|
|Functions and features|
|Automatic fault diagnosis system|
|Operating control lamp|
|Room temperature sensor|
|Operating button for draining residual water|
|Auto restart function|
|Connection for external condensate drain|
|Fan rundown function|
|Laundry drying function|
|Internal drying function|
|Length (packaging excluded) [mm]||390|
|Width (packaging excluded) [mm]||380|
|Height (packaging excluded) [mm]||643|
|(packaging excluded) [kg]||35|
|Equipment, features and functions|
|Automatic defrost system|
|Condensate tank monitoring|
|Overflow protection with automatic switch-off|
|Filling level warning light to indicate a full water tank|
|Room air filter|
|Operating hours counter|
|Operating hours counter|
|Non-marking full-rubber wheels|
|Adjustable bar handle|
|Swivel casters with parking brakes|
|Hose connection possible|
|Hose included in the scope of delivery|
|Recommended hose size [mm]||19|
|Metal plastic composite housing|