TTK 125 S commercial dehumidifier
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Dehumidification
  4. Condensation dehumidifiers, mobile
  5. Commercial dehumidifiers of the TTK‑S series
  6. TTK 125 S

TTK 125 S commercial dehumidifier

"Nobody can offer as many litres at this weight"

Good things come in small packages: Power pack TTK 125 S

The TTK 125 S combines advanced detail solutions for powerful drying applications with a weight-optimized construction in a tried and tested German industrial design – protected prototype.

The inner values are in no way inferior to the impressive enclosure: All electric components are specially enclosed to protect the electronic equipment from anything dangerous which may enter and impair the functionality and durability. Thus, the TTK 125 S is also perfectly suitable for drying in rough conditions.

Due to its extremely low-maintenance design, the TTK 125 S is easy to clean and thanks to its low power to weight ratio and its clever mobility features, it is easy to transport. Nevertheless, in terms of dehumidification capacity, it is no lightweight:

Compared to cheaper rotary compressors, the high-quality 0.58 kW rotation compressor of the TTK 125 S is able to offer higher performance at a comparatively lower power consumption – while also having reserves for high dehumidification performance, even in unheated rooms.

As well as this, compared with other defrost systems, the high-quality hot gas automatic defrost of the TTK 125 S guarantees a much more efficient dehumidification performance without pausing on a time interval during which no dehumidification occurs!

Investment protection for your drying devices

Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...

Technical construction drying

Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...

Environmentally friendly refrigerant R290

Propane (R290) as environmentally friendly refrigerant in dehumidifiers

Every year, several million tonnes of environmentally harmful CO2-emissions (greenhouse gases) are emitted into the air by synthetic refrigerants. For this reason, the utilization of alternative refrigerants has become one of our key objectives. By using propane (R290) as refrigerant, this dehumidifier makes a valuable contribution to protecting our climate.

The natural refrigerant propane (R290) is an organic compound belonging to the group of hydrocarbons. Unlike synthetic refrigerants the environmentally friendly propane (R290) comes with neither ozone depletion potential (ODP = 0) nor a noteworthy greenhouse effect (GWP = 3).

Additional bonus for the environment: Owing to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant thereby additionally reducing your energy costs.

The top drying performer of its power to weight class

This innovative condenser dryer can dehumidify impressive 32 litres within 24 hours. Astounding for a robust and compact package which only weighs 26 kilograms.

In practice, the TTK 125 S seems much lighter than that, because its robust Trotec ergonomic recessed handles with an inner Grip-Clip provide an optimal hold while carrying. With its four sturdy swivel casters with wheel locks, tight construction sites are no problem.

Even in storage, the TTK 125 S makes a good impression – because it only needs surprisingly little space. Due to its two practical stacking grooves on top, equally sized TTK-S devices can be safely stacked to save space during transport and storage.

As with all commercial dehumidifiers of the TTK-S series, the TTK 125 S has a built in operating hours counter which records the precise duration of work accurately and reliably. A dual counter for additional detection of power consumption is optionally available.


TTK 125 S - special equipment features

TTK 125 S - control panel
Clearly arranged control panel – protected by protective bars.
TTK 125 S - operating hours counter
The standard operating hours counter of the TTK 125 S commercial dehumidifier is optionally available as a dual counter for operating and kilowatt hours.
TTK 125 S - stacking grooves
A special enclosure reliably protects the TTK 125 S dehumidifier electronics from dangerous inclusions.
TTK 125 S - electronics protection
Two stacking grooves make it possible to stably stack equally sized TTK-S commercial dehumidifiers to save space.
TTK 125 S – automatic mode
The TTK 125 S ensures automatically that the target value entry is kept constant. When this value is exceeded, the device switches off automatically and also switches on again automatically when the value falls below the target entry. The target value preselection is between 50 % and 90 %, depending on the air humidity value in the room which is to be reached.
TTK 125 S – automatic defrosting
The TTK 125 S comes with function for automatic defrosting. When the room temperature is below 11 °C, the evaporator would freeze during dehumidification. This is why the TTK 125 S carries out fully automatic self-defrosting, if required.
TTK 125 S - memory function
The TTK 125 S has a memory function. Thanks to this, the device restarts after an unexpected shutdown due to a power interruption with the preselected setting as soon as the power supply is available again.
TTK 125 S – permanent mode
In order to continuously drain the condensation water, a pipe can be connected on the rear of the device. This is especially suitable for cellar or storage spaces which are subjected to mould formation by excess humidity.

TTK 125 S - warehouse
The commercial dehumidifier TTK 125 S, by its hygrostat-controlled automatic operation, provides for an optimum room climate, e.g. in storage halls. The target humidity value can be preselected in percentage steps and will then be indicated along with the current actual value.
TTK 125 S - shell
Shells can be dried perfectly and easily in no time with the powerful and comfortable commercial dehumidifier TTK 125 S. This prevents major delays caused by necessary drying processes in the construction project, even at low temperatures.
TTK 125 S - water damage restoration
The TTK 125 S is also an excellent choice when it comes to its use for water damage restoration. The process of drying the spaces can be substantially accelerated in such cases of damage, as a consequence considerably reducing mould formation. A connectable air hose also makes it possible to dry hollows.

A few practical benefits:

  • Development, design, production: 100 % Trotec
  • High dehumidification performance even at low temperatures
  • Maximum dust and dampness protection for all electrical components
  • Very easy to maintain construction
  • Optimal handling
  • Portable and easily stored anywhere thanks to its rotary compressor
  • Practical stacking groove for stable, space-saving storage and transport
  • Stackable with equally dimensioned models
  • Tried and tested German industrial design – protected prototype

External condensate pump

Accessory tip:

External condensate pump for continuous operation

This optionally available condensate pump is compatible with all TTK-S models from Trotec and is ideally suited for longer, unattended dry keeping applications. With a pump height of up to 5 metres the condensate can be pumped from the collection container of the construction dryer into a larger container or outside. This makes it possible to let the construction dryer run in continuous operation without a full collection container interrupting the dehumidification process.

Further information can be found here.

Proper energy billing for existing equipment without meters?

You're using this or another electrical appliance without MID-compliant energy consumption meter of which you have to report the current consumption to insurance companies? Then the BX50 MID is the perfect solution. Just install it between the device and a fixed socket – done!

Fan assistance for construction drying

Fan assistance

Quicker construction drying by air circulation

The drying time can be reduced by half if construction dryers and fans are combined. In doing this, each dryer is supplemented with a fan, which significantly improves the drying performance and thus also the duration of the drying process.

The increased air circulation results in a quicker evaporation of the humidity, for the higher the flow rate at the material surface, the sooner will the drying process be completed.
The axial fans of the TTV series and TTV-S series are especially suitable to provide assistance with regard to the drying process.

Protective hood

A practical protective cover is optionally available for all commercial dehumidifiers of the TTK-S series.

So that weather conditions, dust etc. can no longer clog the TTK 125 S dehumidifier.

More information is available here.

TTK-S-Serie - praktische Schutzhaube
Commercial dehumidifiers of the TTK-S series

All Commercial dehumidifiers of the TTK-S series in direct comparison:

To find the Commercial dehumidifier of the TTK-S series which exactly meets your requirements, please consult the concise overview of all Commercial dehumidifiers of the TTK-S series from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

Shop

TTK 125 S Dehumidifier show in Trotec online shop

TTK 125 S Dehumidifier

This dehumidifier can stand up to the highest of demands and the harshest of conditions. The TTK 125 S convinces with the 0.56 kW compressor and dehumidification performance of max 30 litres/24 h - with a weight of just 26 kg.

919.82 £ incl. VAT Show net price (VAT not included)

buy

Technical data

Technical data
General information
  Article number 1.120.000.124
Dehumidification performance
  At 20 °C / 60 % RH [l/24h] 11
  At 30 °C / 80 % RH [l/24h] 28
  Max. [l/24h] 32
Air flow rate
  Level Max. [m³/h] 250
Recommended room size construction drying
  150
  60
Recommended room size dry keeping
  300
  120
Ambient conditions
  Min. temperature range [°C] 5
  Max. temperature range [°C] 32
  Min. humidity range [% RH] 50
  Max. humidity range [% RH] 90
Electrical values
  Mains connection 220 - 240 V/50 Hz
  Nominal current consumption [A] 2.4
  Power input [kW] 0.5
  Recommended fusing [A] 10
Compressor
  Rotary piston compressor
  Reciprocating piston compressor
  refrigerant R290
  Amount of refrigerant [g] 150
  GWP factor 3
  CO2 equivalent 0.00045
  Pressure suction side [MPa] 1.1
  Pressure outlet side [MPa] 3.1
  Max. permissible pressure [Mpa] 3.1
Water tank
  Contents in [Litres] 6
Sound values
  Distance 1 m [dB(A)] 52
Functions and features
  Automatic fault diagnosis system
  Operating control lamp
  Room temperature sensor
  Automatic switch-off
  Operating button for draining residual water
  Auto restart function
  Memory function
  Fan rundown function
  Laundry drying function
  Selectable ionisation
  Internal drying function
  Child lock
  Night mode
Dimensions
  Length (packaging excluded) [mm] 375
  Width (packaging excluded) [mm] 345
  Height (packaging excluded) [mm] 603
Weight
  (packaging excluded) [kg] 26
Equipment, features and functions
Automatic defrost system
  Hot gas
  Electronic
Automatic dehumidification
  Non-stop dehumidification
  Analogue hygrostat
  Hygrostat-controlled
  Electronic hygrostat
  Program-controlled
Fan
  axial
  Radial
  stages 1
Condensate tank monitoring
  Container available
  Overflow protection with automatic switch-off
  Filling level warning light to indicate a full water tank
Room air filter
  Readily accessible
  Cleanable
  Ionizer selectable
Operating hours counter
  Operating hours counter
  Power meter
Mobility
  Rubber-tyred metal wheels (non marking)
  Carry/transport handle(s)
  Swivel casters with parking brakes
  Plastic wheels
  Non-marking full-rubber wheels
  Adjustable bar handle
Condensate drain
  Hose connection possible
  Hose included in the scope of delivery
  Condensate pump
  Recommended hose size [mm] 19
Control panel
  Protective bar
  Digital display
  Comfort button
Shelf life
  stackable
Housing design
  Steel coated
  Plastics
  Stainless steel
  Metal plastic composite housing
  Aluminium

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...