Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Machines - HighPerformance
  3. Dehumidification
  4. Condensation dehumidifiers, mobile
  5. Construction dryers of the TTK pro series
  6. TTK 400

Mobile condenser dryer TTK 400

The flexible all-rounder...

This universally applicable construction dryer is characterized by a particularly high dehumidification performance. Still, the sound level – very much alike its "little brother's" (TTK 200) – is relatively low, with the result that the device is also suitable for use in occupied rooms.

TTK 400 stainless steel Owing to the big wheels and the ergonomically adjustable handle bar, the transport of both models is easy to manage even on difficult terrain or on stairways and only by one person.

Condensate pump kitFor permanent operation an easily installable condensate pump kit is available for the TTK 400: Remove the side wall, lock the kit in position, reconnect the discharge hose, close the housing, all done!

The TTK 400 is optionally also available in stainless steel.

Cost-effective detail: Not only can the air filter quickly be removed for cleaning in just one step, furthermore, it is also variably usable in both the TTK 200 and the TTK 400!

Cost-effective detail: Not only can the air filter quickly be removed for cleaning in just one step, furthermore, it is also variably usable in both the TTK 200 and the TTK 400!

 

 

Convenient: The handle bar of the TTK 200 and TTK 400 can optionally be placed in a horizontal or vertical position for ergonomic transportation.

Convenient: The handle bar of the TTK 200 and TTK 400 can optionally be placed in a horizontal or vertical position for ergonomic transportation.

 

 

Investment protection for your drying devices

Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...

Performance characteristics TTK 400

  • High dehumidification performance – also at temperatures below 15 °C
  • Operating hours counter
  • Suitable for rooms sized up to 470 m³ for construction drying and water damage restoration
  • Dry keeping of rooms sized up to 940 m³
  • Usable from 0 °C
  • Extremely powerful rotation compressor
  • Service-optimized construction for quick cleaning and inspections
  • Hot gas automatic defrost system
  • Virtually indestructible steel sheet construction
  • Value retention of the TTK pro series
  • Portable in every position – vertical or horizontal – thanks to TTK compressor technology
  • Big wheels – easy-to-handle even on difficult terrain or on stairways
  • Non-marking full-rubber wheels
  • Easily exchangeable and washable air filter
Mobile condenser dryer TTK 400
Mobile condenser dryer TTK 400
Mobile condenser dryer TTK 400
Mobile condenser dryer TTK 400

Shop

Technical data

Technical data
General information
  Article number 1.120.000.400
Dehumidification performance
  At 20 °C / 60 % RH [l/24h] 30
  At 30 °C / 80 % RH [l/24h] 65
  Max. [l/24h] 75
Air flow rate
  Max. air volume flow [m³/h] 600
Recommended room size construction drying
  470
  190
Recommended room size dry keeping
  940
  380
Ambient conditions
  Min. temperature range [°C] 5
  Max. temperature range [°C] 35
  Min. humidity range [% RH] 35
  Max. humidity range [% RH] 100
Electrical values
  Mains connection 230 V/50 Hz
  Power input [kW] 1.5
  Nominal current consumption [A] 6.5
  Recommended fusing [A] 13
  Required current starting phase [A] 20
Compressor
  Rotary piston compressor
  Reciprocating piston compressor
  Type of cooling agent R-407C
  Amount of refrigerant [g] 500
  GWP factor 146
  CO2 equivalent [t] 0.073
  Pressure suction side [MPa] 0.6
  Pressure outlet side [MPa] 2.2
Water tank
  Contents in [Litres]
Sound values
  Distance 1 m [dB(A)] 59
  Distance 3 m [dB(A)] 56
Dimensions
  Length (packaging excluded) [mm] 480
  Width (packaging excluded) [mm] 525
  Height (packaging excluded) [mm] 820
Weight
  (packaging excluded) [kg] 44
Equipment, features and functions
Automatic defrost system
  Hot gas
  Electronic
Automatic dehumidification
  Non-stop dehumidification
  Electronic hygrostat
  Analogue hygrostat
  Hygrostat-controlled
Fan
  axial
  Radial
  stages 1
Condensate tank monitoring
  Container available
  Shut-off when full
  Indicator container full
Room air filter
  Readily accessible
  Cleanable
  Ionizer selectable
Operating hours counter
  Operating hours counter
  Power meter
Mobility
  Carry/transport handle(s)
  Non-marking full-rubber wheels
  Adjustable bar handle
  Carriage design
  Plastic wheels
  Rubber-tyred metal wheels
  Swivel casters with parking brakes
Condensate drain
  Hose connection possible
  Hose included in the scope of delivery
  Condensate pump
  Recommended hose size [mm] 19
Housing design
  Steel coated
  Plastics
  Metal plastic composite housing
  Aluminium
  Stainless steel

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...