Construction dryer TTK 900
Easy to transport, hard to beat – out ultimate condenser dryer for professional drying applications
Construction dryer at its best!
Designed as reference class of professional construction dryers the TTK 900 practically leaves nothing to be desired. Its tough design and robust components ensure a permanently maximum dehumidification performance and value retention. Owing to a perfect combination of an especially powerful and efficient rotation compressor, an utterly robust high-pressure radial fan as well as high-quality electronic and mechanical components, the TTK 900 can impress with an excellent dehumidification capacity, especially at low ambient temperatures.
Powerful air-circulating radial fan with dry air outlet on both sides
In order to quickly distribute the dry, dehumidified air in the entire room, the TTK 900 is fitted with a dry air outlet on both sides. This way, the dry air is blown out at a high volume by the high-pressure radial fan via two air outlet sides without dynamic pressure and can flow evenly through the room – an enormous practical advantage for the fast drying of large rooms!
At the same time, the TTK 900 has been consistently designed to provide maximum mobility for ever-changing sites of operation and to withstand rough working conditions. This is why the TTK 900 features not only a carriage with adjustable push handle, but also large wheels with non-marking rubber tyres – all combined in a robust metal housing.
Along with its minimized energy and floor space requirements the TTK 900 presents the ultimate construction dryer, which is also suitable for water damage drying and dewatering waterworks facilities or large storage facilities with low ambient temperatures.
Effective process for high dehumidification performance of up to max. 100 l/24 h
For an effective dehumidification, the TTK 900 comes equipped with a powerful automatic hot gas defrost system based on the bypass procedure. This system only requires very short defrost phases, which increases the performance level and makes the device ideally suited for an effective dehumidification in low-temperature surroundings such as unheated rooms.
If required, a hygrostat can be connected to the TTK 900 enabling automatic humidity-controlled dry keeping in continuous operation. A condensate pump for condensate discharge across storeys is also available for this purpose.
100 % construction dryer – the name says it all
It's not just a name that turns a commercial dehumidifier into a true construction dryer. The name is an obligation: the device must be able to dry large amounts of air in continuous operation, on the construction site, in cool environments. After all, construction dryers make their living in drying applications, not in the warehouse and particularly not in the workshop.
Which is why the construction dryers of the TTK series have been consistently designed for high dehumidification performance and a long lifetime. Even in continuous use on the construction site, the devices work reliably and without interruption – and if maintenance is required, it can be carried out more quickly than ever before:
Innovative central chassis – low-maintenance modular design
And the entire electronic equipment is not only specially enclosed and thus reliably protected against harmful deposits – it is also designed in a modular fashion and all individual electronics modules are provided with maintenance-friendly plug connections. The replacement of individual modules is therefore quick and easy, even on site: unplug, replace module, plug back in – done. Maintenance-related periods of non-use can thus be reduced to a minimum.
Refrigerant R-454C – less GWP, more efficiency and safety
Refrigerants frequently used in compression refrigeration dryers up to now have a high greenhouse potential. One of the reasons for the EU's F-gas phase down – and for Trotec a self-evident obligation to use not only environmentally friendly but also an equally safe and efficient refrigerant for the TTK construction dryers of the latest generation.
R-454C scores in all three aspects – eco-friendliness, safety and efficiency. Therefore, R-454C is the refrigerant of our choice for the powerful TTK construction dryers.
Unlike natural refrigerants such as propane, R-454C is only flammable with high ignition energy. Consequently, there is no risk of explosion even in the event of a leak, which means that operation and maintenance of the heat exchanger remains simple and safe. The non-toxic R-454C is ideally suited for hermetically sealed refrigeration systems and is not only characterized by a high COP (coefficient of performance), but also by a very low GWP (global warming potential) of less than 150 and an ODP (ozone depletion potential) of 0. This means that R-454C contributes at least 10 times less to the greenhouse effect when it escapes into the atmosphere than commonly used refrigerants.
Practical tip for quicker construction drying
You can halve drying time by combining fans and construction dryers. Each dryer is supplemented with a fan, which has a significant influence on the drying performance and therefore also the duration of the drying process.
The increased air circulation causes a quicker evaporation, for the higher the flow rate at the material surface, the sooner will the drying process be completed. Our recommendation to assist in drying: combine the TTK construction dryers with axial fans of our TTV series or TTV-S series.
Tried and tested technology reinvented – special equipment features of the TTK 900
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
A few practical benefits:
- Development, design, production: 100 % Trotec
- High dehumidification performance – also at temperatures below 15 °C
- Suitable for rooms sized up to 800 m³ for construction drying and water damage restoration
- Dry keeping of rooms sized up to 1,600 m³
- Can be used from 0 °C
- Extremely powerful rotation compressor
- Professional automatic hot gas defrost system based on bypass procedure
- Innovative central chassis, easy to remove for fast cleaning and inspections
- Particularly maintenance-friendly: plug-in electronics modules, easy to replace without tools
- Stackable to save space – small storage space in the warehouse
- Portable in every position – vertical or horizontal – thanks to TTK compressor technology
- Robust and highly mobile – easy to handle even on difficult terrain or on stairways thanks to large wheels
- Powerful radial fan with dry air outlet on both sides for high air circulation rates
- Easily exchangeable and washable air filter
- Connection for external hygrostat
- Adjustable push handle – horizontal or vertical
- Standard operating hours counter
- Optional MID-compliant dual counter for operating hours and energy consumption
Zugleich wurde der TTK 900 konsequent auf maximale Mobilität für wechselnde Einsatzorte und raue Arbeitsumgebungen ausgelegt. Deshalb verfügt der TTK 900 neben einem Fahrwagen mit verstellbarem Schubbügel über große Räder mit nicht abfärbender Gummibereifung.
2,548.98 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen
|At 20 °C / 60 % RH [l/24h]||49|
|At 30 °C / 80 % RH [l/24h]||96|
|Air flow rate|
|Max. air volume flow [m³/h]||665|
|Recommended room size construction drying|
|Recommended room size dry keeping|
|Min. temperature range [°C]||3|
|Max. temperature range [°C]||40|
|Min. humidity range [% r.F.]||35|
|Max. humidity range [% r.F.]||90|
|Mains connection||220 - 240 V/50 Hz|
|Power input [kW]||2.098|
|Nominal current consumption [A]||9.8|
|Recommended fusing [A]||16|
|Rotary piston compressor|
|Reciprocating piston compressor|
|Amount of refrigerant [g]||900|
|Pressure suction side [MPa]||0.7|
|Pressure outlet side [MPa]||2.7|
|Max. permissible pressure [Mpa]||2.7|
|Distance 3 m [dB(A)]||59|
|Length (packaging excluded) [mm]||500|
|Width (packaging excluded) [mm]||565|
|Height (packaging excluded) [mm]||960|
|(packaging excluded) [kg]||69|
|Equipment, features and functions|
|Automatic defrost system|
|Operating hours counter|
|Operating hours counter|
|Hose connection possible|
|Recommended hose size [mm]||14|