Construction dryer TTK 500
Powerful even at low temperatures – high-performance professional condenser dryer in robust carriage design
Universal construction dryer – newly defined
Whether water damage restoration, construction drying or keeping cool commercial spaces dry – reliable drying technology is needed for alternating use on different construction sites. Extremely tough and fail-safe with a high dehumidification performance, even at cold ambient temperatures. This is exactly what characterizes the construction dryer TTK 500 from Trotec.
This professional condenser dryer has been consistently designed to provide maximum mobility for ever-changing sites of operation and to withstand rough working conditions. This is why the TTK 500 features not only a carriage with adjustable push handle, but also large wheels with non-marking rubber tyres – all combined in a robust metal housing.
For storage or transport, the design of the TTK 500 allows the devices to be positioned closely together, so that many construction dryers can be transported to the site of operation with only one trip. In the warehouse, up to three devices can be stacked on top of one another, thus requiring even less floor space.
Effective process for high dehumidification performance of up to max. 70 l/24 h
For an effective dehumidification, the TTK 500 comes equipped with a powerful automatic hot gas defrost system based on the bypass procedure. This system only requires very short defrost phases, which increases the performance level and makes the device ideally suited for an effective dehumidification in low-temperature surroundings such as unheated rooms.
The combination of a high dehumidification performance together with a minimized energy demand and a great mobility with a low floor space requirement makes the TTK 500 the ideal dehumidification solution even at low temperatures – for continuous operations also optionally available with a hygrostat and condensate pump.
100 % construction dryer – the name says it all
It's not just a name that turns a commercial dehumidifier into a true construction dryer. The name is an obligation: the device must be able to dry large amounts of air in continuous operation, on the construction site, in cool environments. After all, construction dryers make their living in drying applications, not in the warehouse and particularly not in the workshop.
Which is why the construction dryers of the TTK series have been consistently designed for high dehumidification performance and a long lifetime. Even in continuous use on the construction site, the devices work reliably and without interruption – and if maintenance is required, it can be carried out more quickly than ever before:
Innovative central chassis – low-maintenance modular design
And the entire electronic equipment is not only specially enclosed and thus reliably protected against harmful deposits – it is also designed in a modular fashion and all individual electronics modules are provided with maintenance-friendly plug connections. The replacement of individual modules is therefore quick and easy, even on site: unplug, replace module, plug back in – done. Maintenance-related periods of non-use can thus be reduced to a minimum.
Tried and tested technology reinvented – special equipment features of the TTK 500
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
Also available as stainless steel version TTK 500 ES
For dehumidification or permanent dry keeping applications in areas with special hygienic requirements or particularly reactive air environments the TTK 500 is also available as stainless steel version TTK 500 ES.
The stainless steel material features a very high corrosion resistance, is easy to clean and particularly resistant to various chemical solutions.
Just like the basic model, the TTK 500 ES, too, can optionally be equipped with an MID-compliant dual counter for operating hours and energy consumption. If required, a hygrostat can also be connected to the TTK 500 ES for automatic humidity-controlled dry keeping. A condensate pump for condensate discharge across storeys is also available for this purpose.
A few practical benefits:
- Development, design, production: 100 % Trotec
- High dehumidification performance – also at temperatures below 15 °C
- Suitable for rooms sized up to 470 m³ for construction drying and water damage restoration
- Dry keeping of rooms sized up to 940 m³
- Can be used from 0 °C
- Extremely powerful rotation compressor
- Professional automatic hot gas defrost system based on bypass procedure
- Innovative central chassis, easy to remove for fast cleaning and inspections
- Particularly maintenance-friendly: plug-in electronics modules, easy to replace without tools
- Stackable to save space – small storage space in the warehouse
- Portable in every position – vertical or horizontal – thanks to TTK compressor technology
- Robust and highly mobile – easy to handle even on difficult terrain or on stairways thanks to large wheels
- Powerful, air circulating axial fan for high air circulation rates
- Easily exchangeable and washable air filter
- Connection for external hygrostat
- Adjustable push handle – horizontal or vertical
- Standard operating hours counter
- Optional MID-compliant dual counter for operating hours and energy consumption
Dieser Profi-Kondenstrockner wurde konsequent auf maximale Mobilität für wechselnde Einsatzorte und raue Arbeitsumgebungen ausgelegt. Deshalb verfügt der TTK 500 neben einem Fahrwagen mit verstellbarem Schubbügel über große Räder mit nicht abfärbender Gummibereifung.
2,201.50 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen
|At 20 °C / 60 % RH [l/24h]||25.2|
|At 30 °C / 80 % RH [l/24h]||58.799|
|Air flow rate|
|Max. air volume flow [m³/h]||1,280|
|Recommended room size construction drying|
|Recommended room size dry keeping|
|Min. temperature range [°C]||5|
|Max. temperature range [°C]||35|
|Min. humidity range [% r.F.]||35|
|Max. humidity range [% r.F.]||100|
|Mains connection||230 V/50 Hz|
|Power input [kW]||1.58|
|Nominal current consumption [A]||7.2|
|Recommended fusing [A]||10|
|Rotary piston compressor|
|Rotary piston compressor|
|Reciprocating piston compressor|
|Amount of refrigerant [g]||650|
|Contents in [l]|
|Distance 1 m [dB(A)]||64|
|Distance 3 m [dB(A)]||58|
|Functions and features|
|Connection for external condensate drain|
|Fan rundown function|
|Laundry drying function|
|Internal drying function|
|Length (packaging excluded) [mm]||438|
|Width (packaging excluded) [mm]||470|
|Height (packaging excluded) [mm]||870|
|(packaging excluded) [kg]||52|
|Equipment, features and functions|
|Automatic defrost system|
|Condensate tank monitoring|
|Filling level warning light to indicate a full water tank|
|Overflow protection with automatic switch-off|
|Room air filter|
|Operating hours counter|
|Operating hours counter|
|Adjustable bar handle|
|Hose connection possible|
|Hose included in the scope of delivery|
|Recommended hose size [mm]||14|