Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

TilexPro
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Water damage restoration
  4. Accessories insulation layer drying
  5. TilexPro

TilexPro –The tile lifting system for professionals

Pick up tiles without risking damage and replace them once the restoration work is completed – with the TilexPro

TilexPro system 30
TilexPro system 50
Patented TilexPro system

If there is a defect underneath the tiling or a core hole needs to be drilled, it so far was the rule that the concerned tile had to be destroyed and replaced upon completion of the restoration work. The patented tile lifting system allows you to remove tiles by means of heat.

The problem:

Rare tiles or older patterns, which can no longer be obtained or only at high expense.

The solution:

With TilexPro you can lift most tiles and reinsert them after completed restoration without damage!

The TilexPro system is characterized by practical details: Depending on the model, the system chamber can be adjusted to all common tile formats – square and rectangular – sized up to 30 cm or 50 cm.

TilexPro comes with carry handles of thermally non-conducting material – that way, the heated chamber can be put aside from the respective tile without the need of wearing protective gloves to remove it. Tiles can thus be removed by means of heat in no time at all.


With the TilexPro system tiles can be detached from the ground in just a few steps:

  • First, the tile is bared by use of a joint cutter.
  • Then the system chamber is adjusted in size to match the tile to be removed, positioned and warmed up with the hot air blower.
  • After that, the tile can be detached from the ground in only a few steps and reinserted after completed restoration without risking damage.

The Trotec tile lifting system TilexPro is available in two different models:

TilexPro system 30
for tile formats sized up to 30 cm
Art. no. 6.100.000.050

TilexPro system 50
for tile formats sized up to 50 cm
Art. no. 6.100.000.052

Every TilexPro system consists of the system chamber and an optionally available hot air blower.

Further recommended accessories for using the system are a joint cutter and a combination device to remove the adhesive residues from tile and ground.


Our tip if there are no spare tiles available for replacement:

If tiles cannot be detached without causing damage and replacement tiles are no longer available, the use of Trotec floor inlays may be a suitable alternative for restoration work, provided the customer agrees to a decorative change of the visual appearance.

Without difficulty Trotec floor inlays can be introduced to all standard core drill holes and the use of our floor inlays requires neither a licence partnership nor an expensive special drilling machine.

All inlays are high-quality products and available as a matching or contrasting counterpart for virtually every decor.


Product brochure Solutions for water damage restoration companies

PRODUCT BROCHURE

For water damage restorers: You can also find all relevant information about our insulation drying units in the product brochure. Download the PDF directly here.

To the PDF document

Trotec: Innovation made in Germany

Take a look behind the scenes: As one of the internationally leading manufacturers of air treatment solutions, Trotec offers industrial and commercial customers innovative products for air purification, dehumidification, heating, air conditioning and ventilation. We rely 100 % on research, development, design and production in Germany for our high-performance devices. For the highest quality requirements, sophisticated system solutions and fresh ideas.

Watch the video to see for yourself!

A few practical benefits:

  • Optimum solution if tiles are available on site or can be procured for replacement
  • Existing tiles can be lifted and reinserted after completed restoration without risking damage
  • No visual impairment of the appearance
  • Suitable for the restoration of larger areas
  • Patented system with adjustable chamber for square and rectangular tiles sized up to 30 cm or 50 cm
  • Carry handles made of thermally non-conductive material

Tile lifting system TilexPro 30

Fliesenaufnahme-System TilexPro 30 show in Trotec online shop
Technical data
General information
  Article number 6.100.000.050
Connector
  Diameter [mm] 56
Dimensions
  Length (packaging excluded) [mm] 320
  Width (packaging excluded) [mm] 320
  Height (packaging excluded) [mm] 250
Weight
  (packaging excluded) [kg] 4.4

 standard equipment

 optionally available

 not available

Tile lifting system TilexPro 50

Fliesenaufnahme-System TilexPro 50 show in Trotec online shop
Technical data
General information
  Article number 6.100.000.052
Connector
  Diameter [mm] 40
Dimensions
  Length (packaging excluded) [mm] 520
  Width (packaging excluded) [mm] 520
  Height (packaging excluded) [mm] 250
Weight
  (packaging excluded) [kg] 7.2

 standard equipment

 optionally available

 not available

Accessories

Loading...

Seminars

Downloads

Loading...

Brochures

Loading...