Direct oil heater fan IDX 50 D
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Heating
  4. Oil heater fans of the IDX-D series
  5. IDX 50 D

Oil heater fan IDX 50 D

The universal solution for heating construction sites, halls and workshops as well as for drying damp masonry

IDX 50 D – pressure gauge
IDX 50 D – control panel
Oil heater fan IDX 50 D

Heats with full power and dries damp masonry

A flexible heating solution is needed for heating open construction sites and shells, stables on farms, tents, workshops but also storage and production facilities. All of these applications require maximum mobility to heat individual areas or changing work areas as needed – without cost-intensive heating of the entire area. The most common problem: the continuous supply of cold air from outside, for instance entering through open doors or missing windows in shells, make the use of conventional heating solutions uneconomical. The economical solution is called IDX!

Heating economically with the directly fired oil heater fan IDX 50 D

In harsh and changing work environments, the thermostat-controlled direct oil heater IDX 50 D impresses with an extremely practical and manoeuvrable carriage construction and an integrated 50-litre fuel tank. With a comparatively low consumption of max. 4.8 litres per hour, the 55 kW power pack generates up to 1,100 m³/h of hot air and thus allows for uninterrupted working throughout the day. No other oil heater fan of the IDX-D series provides more direct heat in open or permanently ventilated rooms.

Mobile direct heat – safe and straight to the point

To allow for easy temperature control, the matt black oil heater fan IDX 50 D comes equipped with a steplessly variable thermostat with a combined actual value indication of target and room temperature. An easy-to-read filling level indication reliably informs you about the remaining fuel quantity. For maximum operational safety, all oil heater fans of the IDX-D series are equipped with an electronic flame trap and integrated overheating protection. 

Overview of IDX-D oil heater fans: The right heating capacity for every application:

IDX 20 D 20 kW 450 m³/h 1.9 l/h 19 l
IDX 31 D 30 kW 750 m³/h 3.0 l/h 38 l
IDX 50 D 55 kW 1,100 m³/h 4.8 l/h 50 l
Suitable for drying construction sites, basements and damp masonry

Suitable for drying construction sites, basements and damp masonry

All oil heater fans of the IDX-D series are recommended for quickly and economically drying damp masonry – for example after heavy rainfall, storms, floods or pipe bursts – due to their enormous heating air volume and simultaneously low oil consumption.

PRODUCT BROCHURE

Enjoy pleasant refreshment! You can also find all the relevant information about our comfort air conditioning units in the product brochure. Download the PDF directly here.

To the PDF document

IDX 50 D – application in the warehouse
IDX 50 D – application in the stable
IDX 50 D – application on the construction site

Working in the warmth and preventing expensive work stoppage

The mobile oil heater fan IDX 50 D is recommended as a universal heat source for a wide range of applications. When heating shells and construction sites, the heater fan ensures uninterrupted working in all kinds of weather conditions. Building materials such as screed or plaster require a specific minimum temperature to be processed in an optimal way. With the directly fired oil heater IDX 50 D you are independent of outdoor temperatures at work. This helps to avoid expensive work stoppage and to meet deadlines that are important for construction progress. In well-ventilated workshops, warehouses and roofed outdoor areas without a permanently installed heating system, the oil heater provides immediately available heat for productive working. If you are working at changing locations, you will no longer want to miss the high flexibility of the IDX 50 D.

Thermostat-controlled temperature setting

The uncomplicated temperature selection (in the range from 5 - 45 °C) is carried out via a steplessly adjustable thermostat with an additional setpoint and actual value dual display. When the desired temperature is reached, the IDX 50 D is switched off fully automatically and is also switched on again automatically when this temperature is undercut.

Quick start-up, low-maintenance operation, easy handling

Concentrate on your work and leave everything else to the direct oil heater fan IDX 50 D. Unattended heating operation can be implemented without any problems. The compact heating device is delivered in a partly pre-assembled state – in the final assembly process you just have to mount the wheels, the frame and the handle.

With the direct oil heater fan IDX 50 D you opt for instantly available heat in almost any place and any weather.


Special equipment features of the IDX 50 D

Striking design, powerful performance, compact dimensions – with its 55 kW, the robust oil heater fan IDX 50 D provides warmth quickly and efficiently.
IDX 50 D – dimensions
The temperature is controlled by a steplessly variable thermostat with dual display for the nominal and actual value.
Control element of the IDX 50 D
The pump air pressure can be read off during operation via the pressure gauge mounted on the rear. In addition, the air pressure can be altered by means of a screw.
Pressure indicator of the IDX 50 D
The integrated tank of the IDX 50 D comprises 50 litres of Diesel or heating oil EL. It is equipped with a filling level indication and a fuel filter.
Fuel filter of the IDX 50 D

Direct, strong warmth, everywhere it is needed!

In the warehouse, the IDX 50 D provides for the right temperatures – exactly in the place where work is currently carried out.
IDX 50 D – application storage hall
Whether you're working in the stable, in the barn or repair works on the tractor – agricultural businesses often have large room areas which are insufficiently heated, or not heated at all.
IDX 50 D – application agricultural sector
Workshops with roll-up doors that are frequently open can also be heated effectively by means of an oil heater fan.
IDX 50 D – application in the workshop
Prevent work stoppage due to cold temperatures. With the IDX 50 D you are independent of outdoor temperatures.
IDX 50 D – application for construction workers

A few practical benefits:

  • Particularly economic solution for standard oil heating
  • Integrated fuel tank with filling level indication
  • Electronic flame trap
  • Overheating protection
  • Stainless steel combustion chamber
  • Hard-wearing double-walled housing for optimum soundproofing and insulation
  • Integrated thermostat with digital dual display for nominal and actual value
  • Smooth-running carriage construction for easy change of location
Technical data by comparison

All IDX-D oil heater fans in direct comparison:

To find the oil heater fan which exactly meets your requirements, please consult the concise overview of all oil heater fans of the IDX-D series from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

Practical knowledge guidebook – heating know-how for professional users

Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.

Continue to the practical knowledge guidebook for professional heating

Continue directly to the practical knowledge guidebook for professional heating

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator

Buy

Direct oil heater fan IDX 50 D show in Trotec online shop

Direct oil heater fan IDX 50 D

The directly fired oil heater fan IDX 50 D in martial black impresses not only with its powerful heating output of up to 55 kW and a large fuel tank with a capacity of 50 liters, but also with a hot air volume of up to 1,100 m³/h.

You save: 175.63 £

555.62 £ 379.99 £ incl. VAT Show net price (VAT not included)

buy

Technical data

Technical data
General information
  Article number 1.430.000.071
Air flow rate
  Level Max. [m³/h] 1,100
Fan
  axial
  Radial
Nominal heat output
  Level Max. [kW] 55
  Level Max. [kcal] 47,300
Temperature increase
  Level Max. [°C] 70
Electrical values
  Mains connection 220 - 240 V/50 Hz
  Current consumption [A] 1.36
  Power input [kW] 0.31
  Heating capacity [kW] 55
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 1.4
Operation
  Main switch
  Steplessly adjustable thermostat
  Temperature indication
Fuel feed
  Fuel feed Fuel pump
Oil consumption
  Level Max. [l/h] 4.8
Tank contents
  Content in [l] 50
Sound values
  Distance 1 m [dB(A)] 84
Suitable fuels
  EL fuel oil
  Diesel
  Low-sulphur EL fuel oil
Dimensions
  Length (packaging excluded) [mm] 1,119
  Width (packaging excluded) [mm] 576
  Height (packaging excluded) [mm] 711
Weight
  (packaging excluded) [kg] 26
Equipment, features and functions
Mobility
  Wheels
  Feet
Housing design
  Steel

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...