Oil heater fan IDS 20 D from Trotec
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Heating
  4. Oil heater fans of the IDS series
  5. IDS 20 D

Oil heater fan IDS 20 D

Robust direct oil heater fan for quick, uncomplicated heating applications

Oil heater fan IDS 20 D
Oil heater fan IDS 20 D
Mobile heating power on wheels: The IDS 20 D oil heater fan

IDS 20 D – mobile heating power for the construction industry and the agricultural sector

As a direct heater, the oil heater fan IDS 20 D offers mobile heating power with a 100 % efficiency directly on the spot. The IDS 20 D is especially suitable for heating well-ventilated stables or winter construction sites, but of course also for defrosting machines, vehicles or pipes.

Manufactured in Europe, the IDS 20 D's surface temperature of the outer casing and thus the risk of injuries for the user is minimized, due to its double-walled housing with protective coating. Moreover, the housing provides optimum soundproofing. The robust construction comes equipped with electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling.

Due to its carriage design with a push bar frame and front wheels, this professional oil heater can be used flexibly and can be transported quickly from one point of use to the other. Its integrated fuel tank renders additional external oil tanks unnecessary.

The oil heater fan IDS 20 D impresses with an appealing value-for-money ratio and a possibility for the quick heating of cold workstations with an air flow rate of 350 m³/h and a rated heat input of 20 kW – the high-quality oil burner with its Danfoss® pump vouches for this.

IDS direct oil heater fans – 100 % heating power for outdoor areas

The direct oil heater fans of the IDS series are optimally suited for outdoor use, e.g. for heating outdoor construction sites and agricultural areas, or for the use inside well-ventilated interior spaces, for they emit 100 % of the heat they produce. That’s why direct oil heater fans have no chimney. Or in other words, this process yields a heating power efficiency of 100 %.

In a directly heated system the fan blowing out the heated air also brings along combustion air.

A pump draws the fuel from the tank, brings it to operating pressure and, in a final step, guides it into the combustion chamber via an atomiser nozzle. There, the air-fuel mixture is burnt and the hot air generated is then mixed with the main air flow of the blower with exact dosage.

In addition to heat, direct heaters thus also emit combustion gases directly into the room. For this reason, they are unsuitable for poorly ventilated, closed rooms used by people or animals.

Since plenty of moisture is released during combustion, direct oil heater fans should never be used for construction drying.

Functional diagram IDS 20 D
The IDS 20 D offers a wide range of applications

The IDS 20 D offers a wide range of applications

The combination of easy handling, a carriage design with mobile use and a maximum rated heat output of 20 kW makes the direct oil heater fan IDS 20 D a versatile heating solution for a large variety of applications, for instance:

  • Heating of well-ventilated stables
  • Air heating on winter construction sites
  • Defrosting of and keeping machines, vehicles or pipes free of ice
  • Drying of agricultural goods like hay or grains
  • Heating of construction materials
  • Heating of well-ventilated interior spaces and roofed-over outdoor areas
Suitable for drying construction sites, basements and damp masonry

Suitable for drying construction sites, basements and damp masonry

All oil heater fans of the IDS series are suited for quickly and economically drying damp masonry – for example after heavy rainfall, storms, floods or pipe bursts – due to their enormous heating air volume and simultaneously low oil consumption.

PRODUCT BROCHURE

Enjoy pleasant refreshment! You can also find all the relevant information about our comfort air conditioning units in the product brochure. Download the PDF directly here.

To the PDF document


Special equipment features of the oil heater fan IDS 20 D

Thanks to the carriage design with the push bar frame and front wheels, the oil heater fan IDS 20 can be easily transported from one point of use to the other. Furthermore, an integrated handle allows for an easy change of position.
Practical carriage design
To prevent the connecting cable from becoming a trip hazard during transport, an integrated cable holder allows for fastening the connecting cable safely whilst the device is transported.
Cable holder for safe storage during transport
The integrated tank can be filled easily and has a storage capacity of 17 litres of fuel – enough for more than 8 h of maximum operation.
Integrated 17 litre tank
The IDS 20 D comes equipped with a two-line heating system with an easily accessible external fuel filter.
Readily accessible fuel filter

To the heating capacity calculator

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator


Oil heater fan IDS 20 D

A few practical benefits:

  • Integrated oil burner with Danfoss® pump
  • Electronic flame trap
  • Overheating thermostat
  • Stainless steel combustion chamber
  • Double-walled housing for optimum soundproofing and insulation
  • Integrated fuel tank
Continue directly to the practical knowledge guidebook for professional heating

Practical knowledge guidebook – heating know-how for professional users

Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.

Continue to the practical knowledge guidebook for professional heating


Technical data by comparison

All oil heater fans of the IDS series by direct comparison:

To find the IDS oil heater fan which exactly meets your requirements, please consult the concise overview of all devices from the Trotec IDS series, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison


Buy

Direkt-Ölheizer IDS 20 D show in Trotec online shop

Technical data

Technical data
General information
  Article number 1.430.000.020
Functional principle
  Method of heating direct
  Oil
  Method of heating indirect
Air flow rate
  Level Max. [m³/h] 350
Fan
  axial
  Radial
Nominal heat input
  Level Max. [kW] 20
Nominal heat output
  Level Max. [kW] 20
  Level Max. [kcal] 17,200
Temperature increase
  Level Max. [°C] 100
Electrical values
  Mains connection 230 V/50 Hz
  Current consumption [A] 1
  Power input [kW] 0.2
  Heating capacity [kW] 20
Electric connection
  Connection plug CEE 7/7 (plug type F + E)
  Cable length [m] 1.2
Operation
  Overheating protection
  Internal thermostat
  Temperature indication
Fuel feed
  Fuel feed Danfoss pump
Fuel filter
  Available
Oil consumption
  Level Max. [l/h] 2.04
Tank contents
  Content in [l] 17
Hose connection
  Diameter | Hose connection [mm]
Chimney connection
  Diameter [mm]
  Available
Sound values
  Distance 1 m [dB(A)] 67
Suitable fuels
  Kerosene
  Diesel
  EL fuel oil
  Low-sulphur EL fuel oil
Dimensions
  Length (packaging excluded) [mm] 720
  Width (packaging excluded) [mm] 300
  Height (packaging excluded) [mm] 450
Weight
  (packaging excluded) [kg] 20
Equipment, features and functions
Mobility
  Carry/transport handle(s)
  Plastic wheels
  Rubber-tyred metal wheels
  Forklift
  Crane
  Non-marking full-rubber wheels
Housing design
  Steel
  Stainless steel

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Seminars

Downloads

Loading...