Oil heater fan IDE 80
Our most powerful indirect oil heater fan IDE 80 is our recommendation for construction sites, halls, agriculture and workshops!
So much hot air for so little money – this is the successful concept of the IDE series which also applies to its currently largest member. The oil heater fan IDE 80 has a heating capacity of 80 kW setting new standards for its own class as well as for heating at construction sites, in workshops and halls as well as in agriculture.
The optional flue gas discharge allows flexible use of the indirect-fired oil heater fan IDE 80 for heating closed rooms. The IDE 80 is fired either with diesel or fuel oil. Continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss injection pump.
Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.
A built-in thermostat with a dual display for the actual and the nominal value is provided for temperature control. Another external thermostat with a 25-metre connection cable is available for applications in which the oil heater fan shall not be positioned in the area to be heated.
The oil heater fan IDE 80 is, of course, also excellently equipped for outdoor heating: The smooth-running carriage construction with cable holders and a fuel tank as well as the durable, double-coated housing make it as mobile as weatherproof.
IDE indirect oil heaters – maximum heating power, clean warmth
The indirect oil heaters of the IDE series are ideally suited for rooms in which ventilation is only possible to a certain extent, but which still are to be used by people and animals. They are also a good choice for speeding up construction drying as well as in rooms where there is a fire hazard due to combustible substances.
In case of indirect heaters, the air to be heated is completely isolated from the combustion chamber.
The air is heated while flowing past the enlarged area of the combustion chamber, the heat exchanger. To be sure, the fan blowing out warm air also provides the required combustion air, but the combustion products are led away into the open air through a chimney.
Thus, in order to obtain both clean and dry warmth, we recommend using an indirect heater.
Unlike direct heaters, they do not emit any combustion products or water vapour into the room air, provided that the optionally available flue gas discharge is used.
VIDEOS: Trotec oil heater blowers live in action
In our Youtube playlist we have compiled exciting projects that users have realised with Trotec oil heater blowers. The application possibilities are manifold and the tinkerers have implemented their personal vision of a warm working environment with a lot of ingenuity and commitment. Very inspiring!
Special equipment features
Practical knowledge guidebook – heating know-how for professional users
Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.
Continue to the practical knowledge guidebook for professional heating
A few practical benefits:
- Particularly economic solution for standard oil heating
- Integrated fuel tank with filling level indication
- Electronic flame trap
- Overheating protection
- Stainless steel combustion chamber
- Integrated thermostat with dual display for actual and nominal value
- Connection for external thermostat
- Carriage for easy change of location
Heat requirement calculation
In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.
All IDE oil heater fans in direct comparison:
To find the oil heater fan which exactly meets your requirements, please consult the concise overview of all oil heater fans of the IDE series from Trotec, which we’re providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
|Method of heating indirect|
|Method of heating direct|
|Air flow rate|
|Level Max. [m³/h]||2,000|
|Nominal heat output|
|Level Max. [kW]||80|
|Level Max. [kcal]||68,800|
|Level Max. [°C]||105|
|Mains connection||230 V, 50 Hz|
|Current consumption [A]||3.3|
|Power input [kW]||0.9|
|Heating capacity [kW]||80|
|Connection plug||CEE 7/7|
|Cable length [m]||1.2|
|Connection for external thermostat|
|Fuel feed||Danfoss pump|
|Level Max. [l/h]||7.6|
|Content in [l]||68|
|Diameter | Hose connection [mm]||400|
|Diameter | Chimney connection [mm]||150|
|Distance 1 m [dB(A)]||80|
|EL fuel oil|
|Low-sulphur EL fuel oil|
|Length (packaging excluded) [mm]||1,370|
|Width (packaging excluded) [mm]||560|
|Height (packaging excluded) [mm]||995|
|(packaging excluded) [kg]||59|
|Equipment, features and functions|
|Rubber-tyred metal wheels|