Oil heater fan IDE 50 D
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Heating
  4. Oil heater fans of the IDE series
  5. IDE 50 D

Oil heater fan IDE 50 D

The direct oil heater fan IDE 50 D can heat directly where you need it

Oil heater fan IDE 50 D
Oil heater fan IDE 50 D
Oil heater fan IDE 50 D

The oil heater fan IDE 50 D can provide large amounts of hot air directly where needed and is therefore especially suited for heating well-ventilated building objects, production areas or storage facilities.

Due to its durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank, this oil heater fan is optimally prepared for outdoor heating applications and, by employing a thermostat, it can also be used in fully automatic permanent heating operation without difficulty.

In the course of this, the IDE 50 D’s large air outlet ensures a maximum expansion of warm air with a high efficiency level of 100 %.

In addition to the integrated thermostat, an external thermostat is optionally available as accessory for temperature control; it can also measure the temperature of a place to be heated which is located up to 25 metres away from the oil heater fan.

IDE direct oil heaters – 100 % heating power for outdoor areas

The direct oil heaters of the IDE series are optimally suited for outdoor use, e.g. for heating outdoor construction sites and agricultural areas, or for use inside well-ventilated interior spaces, for they emit 100 % of the heat they produce. Hence, direct heaters also have no chimney. Or in other words, this process yields a heating power efficiency of 100 %.

In a directly heated system the fan blowing out the heated air also brings along combustion air.

First, fuel is atomised, ignited and burned in the combustion chamber. Then the hot gases are admixed to the main air current of the fan in accurate proportions.

In addition to heat, direct heaters thus also emit combustion gases directly into the room. For this reason, they are unsuitable for poorly ventilated, closed rooms used by people or animals.

Since plenty of moisture is released during combustion, direct heaters should never be used for construction drying.

Schematic diagram direct heaters

Special equipment features

The operating elements of the IDE 50 D are well-arranged centrally on one side of the device. As a result you can always access the operating switch, the analogue thermostat and the connection for an external thermostat.
Oil heater fan IDE 50 D
The temperature can be adjusted as required via a stepless thermostat control.
Analogue thermostat control
The filling level of the integrated fuel tank can be checked anytime via the standard liquid level indication.
Tank filling level indication
The oil heater fan IDE 50 D is equipped with a connection for an external thermostat if the temperature is to be measured and controlled at a location to be heated that is up to 25 metres away (a thermostat is optionally available).
Connection for an external thermostat

To the heating capacity calculator

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator

A few practical benefits:

  • Particularly economic solution for standard oil heating
  • Integrated fuel tank with filling level indication
  • Electronic flame trap
  • Overheating protection
  • Stainless steel combustion chamber
  • Integrated thermostat
  • Connection for external thermostat
  • Carriage for easy change of location
Continue directly to the practical knowledge guidebook for professional heating

Practical knowledge guidebook – heating know-how for professional users

Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.

Continue to the practical knowledge guidebook for professional heating

Technical data by comparison

All IDE oil heater fans in direct comparison:

To find the oil heater fan which exactly meets your requirements, please consult the concise overview of all oil heater fans of the IDE series from Trotec, which we’re providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison


IDE 50 D Oil Fired Direct Heater show in Trotec online shop

IDE 50 D Oil Fired Direct Heater

Oil fired direct heater with an air flow rate of 1,100 m³/h, 50 kW heating performance and a maximum temperature increase of up to 106 °C. Oil fired direct heaters of the IDE-series are very suitable for outdoor usage (dry stationing) or good ventilated interiors.

You save: 58.96 £

506.45 £ 447.49 £ incl. VAT Show net price (VAT not included)


Technical data

Technical data
General information
  Article number 1.430.000.070
Functional principle
  Method of heating direct
  Method of heating indirect
Air flow rate
  Level Max. [m³/h] 750
Nominal heat output
  Level Max. [kW] 50
  Level Max. [kcal] 43,000
Temperature increase
  Level Max. [°C] 180
Electrical values
  Mains connection 220 - 240 V/50 Hz
  Current consumption [A] 1.25
  Power input [kW] 0.9
  Heating capacity [kW] 51
Electric connection
  Connection plug CEE 7/7 (plug type F + E)
  Cable length [m] 1.25
  Internal thermostat
  Connection for external thermostat
  Overheating protection
  Temperature indication
Fuel feed
  Fuel feed Compressor
Oil consumption
  Level Max. [l/h] 4.8
Tank contents
  Content in [l] 38
Hose connection
  Diameter | Hose connection [mm]
Chimney connection
  Diameter [mm]
Sound values
  Distance 1 m [dB(A)] 77
Suitable fuels
  EL fuel oil
  Low-sulphur EL fuel oil
  Length (packaging excluded) [mm] 860
  Width (packaging excluded) [mm] 456
  Height (packaging excluded) [mm] 600
  (packaging excluded) [kg] 22
Equipment, features and functions
  Carry/transport handle(s)
  Plastic wheels
  Rubber-tyred metal wheels
  Non-marking full-rubber wheels
Housing design

 standard equipment

 optionally available

 not available



Alternative products