Oil heater fan IDE 30 D
Direct oil heater fan IDE 30 D with integrated tank – the particularly economical solution for oil heating
This oil heater fan is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank – ideal prerequisites for reliable continuous heating applications on frosty construction sites, in the agricultural sector or in well-ventilated storage areas.
A thermostat is permanently installed for temperature control; in addition, an external thermostat with a 25-metre connection cable can optionally also be supplied in case the oil heater fan is to be positioned away from the area to be heated.
The current amount of fuel can comfortably be read on the integrated tank filling level indication at any time.
If you are looking for a solid and reliable, cost-effective solution for typical permanent heating applications with direct, on-site warmth, the oil heater fan IDE 30 D is the ideal choice.
IDE direct oil heaters – 100 % heating power for outdoor areas
The direct oil heaters of the IDE series are optimally suited for outdoor use, e.g. for heating outdoor construction sites and agricultural areas, or for use inside well-ventilated interior spaces, for they emit 100 % of the heat they produce. Hence, direct heaters also have no chimney. Or in other words, this process yields a heating power efficiency of 100 %.
In a directly heated system the fan blowing out the heated air also brings along combustion air.
First, fuel is atomised, ignited and burned in the combustion chamber. Then the hot gases are admixed to the main air current of the fan in accurate proportions.
In addition to heat, direct heaters thus also emit combustion gases directly into the room. For this reason, they are unsuitable for poorly ventilated, closed rooms used by people or animals.
Since plenty of moisture is released during combustion, direct heaters should never be used for construction drying.
Special equipment features
Heat requirement calculation
In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.
A few practical benefits:
- Particularly economic solution for standard oil heating
- Integrated fuel tank with filling level indication
- Electronic flame trap
- Overheating protection
- Stainless steel combustion chamber
- Integrated thermostat
- Connection for external thermostat
- Carriage for easy change of location
Practical knowledge guidebook – heating know-how for professional users
Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.
All IDE oil heater fans in direct comparison:
To find the oil heater fan which exactly meets your requirements, please consult the concise overview of all oil heater fans of the IDE series from Trotec, which we’re providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
|Method of heating direct|
|Method of heating indirect|
|Air flow rate|
|Level Max. [m³/h]||720|
|Nominal heat output|
|Level Max. [kW]||30|
|Level Max. [kcal]||25,800|
|Level Max. [°C]||210|
|Mains connection||230 V/50 Hz|
|Current consumption [A]||1.247|
|Power input [kW]||0.23|
|Heating capacity [kW]||30|
|Connection plug||CEE 7/7 (plug type F + E)|
|Cable length [m]||1.2|
|Connection for external thermostat|
|Level Max. [l/h]||2.8|
|Content in [l]||19|
|Distance 1 m [dB(A)]||76|
|EL fuel oil|
|Low-sulphur EL fuel oil|
|Length (packaging excluded) [mm]||830|
|Width (packaging excluded) [mm]||430|
|Height (packaging excluded) [mm]||560|
|(packaging excluded) [kg]||18|
|Equipment, features and functions|
|Rubber-tyred metal wheels|
|Non-marking full-rubber wheels|